Introduce /etc/rc.d/bluetooth script to start/stop Bluetooth devices. It
will be called from devd(8) in response to device arrival/departure events.
It is also possible to call it by hand to start/stop particular device
without unplugging it.
Introduce generic way to set configuration parameters for Bluetooth devices.
By default /etc/rc.d/bluetooth script has hardwired defaults compatible
with old rc.bluetooth from /usr/share/netgraph/bluetooth/examples. These
can be overridden using /etc/defaults/bluetooth.device.conf file (system
wide defaults). Finally, there could be another device specific override
file located in /etc/bluetooth/$device.conf (where $device is ubt0, btccc0
etc.)
The list of configuration parameters and their meaning described in the
/etc/defaults/bluetooth.device.conf file. Even though Bluetooth device
configuration files are not shell scripts, they must follow basic sh(1) syntax.
Add rc.d scripts for the hcsecd(8) and sdpd(8) daemons. Put defaults into
/etc/defaults/rc.conf. Both daemons can run even if no Bluetooth devices
are attached to the system. Both daemons depend on Bluetooth socket layer.
Fix Bluetooth assigned numbers URL in /etc/bluetooth/protocols file.
Add an rc.d script to start the pfsync interface after all
the conventional network interfaces have been started so that
pfsync can be attached to any of the latter.
Record the dependency of rc.d/pf on the newly added rc.d/pfsync.
Also make rc.d/pf start as early as before rc.d/routing to improve
system security.
Document rc.d/pfsync on pfsync(4) and rc.conf(5).
Approved by: re (scottl), mlaier
Add a new rc.conf entry, kerberos5_server_flags, which allows the
administrator to specify additional start-up flags to the Kerberos
5 Authentication Server.
Approved by: re (scottl)
Stop hard-coding an -M flag to mdmfs(8) in /etc/rc.subr.
Now this flag can be set, or not set, for memory-backed
file systems on individual basis, as illustrated by the
rc.conf(5) variables tmpmfs_flags and varmfs_flags. The
flag is set for those FS'en by default, in /etc/defaults/rc.conf,
in order to stay compatible with the old rc.subr behaviour.
Approved by: re (scottl)
etc/defaults/rc.conf 1.255,1.256,1.257
- Remove gbde_swap_enable variable (it has no effect).
- Add geli_swap_flags variable which holds flags used by geli(8) when
configuring GELI-encrypted swap partitions.
- Add variables used by rc.d/geli and rc.d/geli2 scripts.
Approved by: re (kensmith)
way interfaces are configured. Some key points:
- At startup, all interfaces are configured through /etc/rc.d/netif.
- ifconfig_<if> variables my now mix real ifconfig commands the with
DHCP and WPA directives. For example, this allows media
configuration prior to running dhclient.
- /etc/rc.d/dhclient is not run at startup except by netif to start
dhclient on specific interfaces.
- /etc/pccard_ether calls "/etc/rc.d/netif start <if>" to do most of
it's work.
- /etc/pccard_ether no longer takes additional arguments to pass to
ifconfig. Instead, ifconfig_<if> variables are now honored in favor
of pccard_ifconfig when available.
- /etc/pccard_ether will only run on interfaces specified in
removable_interfaces, even if pccard_ifconfig is set.
save file was /var/db/entropy, which also happens to
be the directory where the individual entropy files
created by /usr/libexec/save-entropy are stored.
Change the suggestion to be /var/db/entropy-file
instead.
In an error condition where the shutdown file is not
created, the error message accessed a variable that
doesn't exist.
PR: conf/75722
Submitted by: Nicolas Rachinsky <list@rachinsky.de>
systems that boot with this value at the lowest setting. Change the
default boot config back to "leave frequency as BIOS set it". Also, fix
buglet where acpi_throttle wouldn't be used if p4tcc was present but
disabled by the user.
MFC after: 1 week
on boot, force it to HIGH. This is needed for some systems which appear
to boot with a low acpi_throttle setting by default. Thanks to Christian
Brueffer for tracking this down on his system.
MFC after: 1 day
default for now. Default flags create missing directories.
Remove comment about doing this in etc/rc.d/var.
Unlike in the PR, I chose to do this in the lpd script where we reliably
have /usr available.
PR: conf/71488
Submitted by: RZ-FreeBSD0904 at fh-karlsruhe dot de
- Enable it by default, running newsyslog with -CN which creates files
that have the C flag specified in /etc/newsyslog.conf.
- Remove the "newsyslog -CC" call from etc/rc.d/var and the check for
newsyslog.
- Add the C flag to entries in /etc/newsyslog.conf that are currently
installed as part of the base system.
There are two effects from this change:
- Users who delete default syslog files to stop logging to them
will need to set newsyslog_enable=NO in rc.conf or remove the C
flag from those file in /etc/newsyslog.conf or they will come back
on the next boot.
- Diskless systems now create the same set of files that ordinary
systems have by default instead of every file in newsyslog.conf.
frequencies are specified with performance_cpu_freq and economy_cpu_freq.
Of course, special values LOW and HIGH are also supported. Also, remove
old throttling support.
1. Feature: for flexibility reasons and as a prerequisite to clean
shutdowns, allow the configuration of a stop/shutdown command
via rc.conf variable "jail_<name>_exec_stop" in addition to the
start/boot command (rc.conf variable "jail_<name>_exec_start"). For
backward compatibility reasons, rc.conf variable "jail_<name>_exec"
is still supported, too.
2. Debug: Add the used boot/shutdown commands to the debug output of
the /etc/rc.d/jail script, too.
3. Security: Run the Jail start/boot command in a cleaned environment
to not leak information from the host to the Jail during startup.
4. Feature: Run the Jail stop/shutdown command "jail_<name>_exec_stop" on
"/etc/rc.d/jail stop <name>" to allow a graceful shutdown of the Jail
before its processes are just killed.
5. Bugfix: When killing the remaining Jail processes give the processes
time to actually perform their termination sequence. Without this the
subsequent umount(8) operations usually fail because the resources
are still in use. Additionally, if after trying to TERM-inate the
processes there are still processes hanging around, finally just KILL
them.
6. Bugfix: In rc.shutdown, if running inside a Jail, skip the /etc/rc.d/*
scripts which are flagged with the KEYWORD "nojail" to allow the
correct operation of rc.shutdown under jail_<name>_exec_stop="/bin/sh
/etc/rc.shutdown". This is analogous to what /etc/rc does inside a Jail.
Now the following typical host-configuration for two Jails works as
expected and correctly boots and shutdowns the Jails:
-----------------------------------------------------------
# /etc/rc.conf:
jail_enable="YES"
jail_list="foo bar"
jail_foo_rootdir="/j/foo"
jail_foo_hostname="foo.example.com"
jail_foo_ip="192.168.0.1"
jail_foo_devfs_enable="YES"
jail_foo_mount_enable="YES"
jail_foo_exec_start="/bin/sh /etc/rc"
jail_foo_exec_stop="/bin/sh /etc/rc.shutdown"
jail_bar_rootdir="/j/bar"
jail_bar_hostname="bar.example.com"
jail_bar_ip="192.168.0.2"
jail_bar_devfs_enable="YES"
jail_bar_mount_enable="YES"
jail_bar_exec_start="/path/to/kjailer -v"
jail_bar_exec_stop="/bin/sh -c 'killall kjailer && sleep 60'"
-----------------------------------------------------------
# /etc/fstab.foo
/v/foo /j/foo/v/foo nullfs rw 0 0
-----------------------------------------------------------
# /etc/fstab.bar
/v/bar /j/bar/v/bar nullfs rw 0 0
-----------------------------------------------------------
Reviewed by: freebsd-hackers
MFC after: 2 weeks
rebadged Xircom REM56 RealPort card. Short MFC timeout to beat the 4.11
code freeze.
PR: 53027
Submitted by: John Merryweather Cooper <coop9211 at uidaho dot edu>
Approved by: imp (mentor)
MFC after: 2 days
packet counts by pf(4).
This adds a ``daily_status_security_pfdenied_enable'' variable to
periodic.conf, which defaults to ``YES'' as the matching IPF(W) versions.
The output will look like this (line wrapped):
pf denied packets:
> block drop log on rl0 proto tcp all [ Evaluations: 504986 Packets: 0
Bytes: 0 States: 0 ]
> block drop log on rl0 all [ Evaluations: 18559 Packets: 427 Bytes: 140578
States: 0 ]
Submitted by: clive (thanks a lot!)
MFC after: 2 weeks
this feature for a jail named foo :
jail_foo_mount_enable="YES"
jail_foo_fstab="/etc/fstab.foo"
The second line is actually useless, since the code defaults to
using "/etc/fstab.$jailname" as the fstab file if none is specified.
MFC after: 3 days
Submitted by: Jeremie Le Hen <jeremie@le-hen.org>
These can be used to pass extra options to the mdmfs(8) utility,
to customize the finer details of the md file system creation
(i.e. to turn on/off softupdates, to specify a default owner for md
filesystem, etc).
Use these two new flags to mount tmpmfs and varmfs without
softupdates, since it doesn't make much sense to use SU on
malloc-backed file systems.
Reviewed by: mtm
Inspired by: J. D. Bronson, jbronson at wixb dot com
on the system.
To start/stop/check on a specific device give the device name as
the second argument to the script:
# /etc/rc.d/moused start ums0
To use different rc.conf(5) knobs with different mice use the device
name as part of the knob. For example, if the mouse device is ums0, then:
moused_ums0_enable=yes
moused_ums0_flags="-z 4"
moused_ums0_port="/dev/ums0"
Starting rc.d/moused without the device argument will use the standard
moused_* flags. So, this commit should not disrupt or change current usage.
To preserve current behaviour with respect to usb mice, which appear
automatically when inserted, there is a new knob, moused_nondefault_enable,
which will treat any devices without rc.conf knobs as enabled.
To minimize knobs in /etc/rc.conf, the device file and pid file are
auto-computed, so that in the typical case for a usb mouse you don't
need to add anything extra in /etc/rc.conf to get it working.
Additionally, this updates /etc/usbd.conf to use the rc.d/moused script so
people don't have to modify it to configure their usb mouse anymore.
MFC after: 1 month
unbreak /etc/rc.d/root for diskless systems that get their root
filesystem from a read-only NFS mount.
PR: conf/72927
Submitted by: Ralf Wenk <RZ-FreeBSD1004@fh-karlsruhe.de>
Reviewed by: brooks
pointed out that /usr/local/etc/rc.d/000.pkgtools.sh installed
with the portupgrade does an equivalent thing, so I personally
would like to see the change reverted, but let David handle it.
to NO of course). Provide a basic ruleset file, rc.bsdextended, but allow
the filename to be overridden through rc.conf.
Discussed with: rwatson (awhile ago)
by default when named is enabled. Also, improve our default directory
layout by creating /var/named/etc/namedb/{master|slave} directories,
and use the former for the generated localhost* files.
Rather than using pax to copy device entries, mount devfs in the
chroot directory.
There may be some corner cases where things need to be adjusted,
but overall this structure has been well tested on a production
network, and should serve the needs of the vast majority of users.
UPDATING has instructions on how to do the conversion for those
with existing configurations.
