when it runs on half-duplex media.
While I'm here add register definition for GPREG1. ATM the GPREG1
register is only valid for JMC250 A1/A2.
Submitted by: Ethan at JMicron
o don't use the key index to identify when the driver has been
asked to allocate a key slot, use an explicit flag; allows
drivers to force s/w fallback for entries in the global table
o change callback api to allocate driver resources for a crypto key:
- de-const the key parameter so drivers can muck with the flags
- on callback failure don't automatically try to setup s/w crypto;
instead the driver must now mark the key entry for s/w crypto and
the caller will re-attach the cipher module
NB: api change permits drivers more control over fallback to s/w
crypto (e.g. based on a limited number of h/w key slots)
to vga_pci.c to request on behalf of it's children. This causes vgapci to show
up as the interrupt owner in vmstat -i, rather than the child device.
Approved by: jhb(mentor)
kib@ and I have decided we will MFC the bpf(4)/snp(4) fixes after we've
released 7.1. Make sure the code in HEAD doesn't refer to a flag we
don't need anyway.
snp(4) in the MPSAFE TTY P4 branch already works, but still needs some
polishing before it can be integrated to SVN.
this also can be happened if we pull the USN stick out forcibly.
Currently the ZyDAS driver uses tsleep() when it try to query a read
command to the device and it'd make a timeout if the device doesn't
response within about 1 sec.
In a case of that the USB stick is gone by hand and the driver's
scanning with changing the channel numbers, the thread which is sleeping
until a command requested is responded can be waked up after all
detaching routines finished that means the zyd softc already freed.
Tring to touch the softc freed by the wakeup thread makes a panic.
So make sure that all sleeping threads should be waken up before the
detach is completed and any other new requests to the device should be
prevented.
years by the priv_check(9) interface and just very few places are left.
Note that compatibility stub with older FreeBSD version
(all above the 8 limit though) are left in order to reduce diffs against
old versions. It is responsibility of the maintainers for any module, if
they think it is the case, to axe out such cases.
This patch breaks KPI so __FreeBSD_version will be bumped into a later
commit.
This patch needs to be credited 50-50 with rwatson@ as he found time to
explain me how the priv_check() works in detail and to review patches.
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
Reviewed by: rwatson
Left only parts surely required for basic troubleshooting and configuration
purposes. There is still very long output, but further shrinking makes it
less informative.
Original debugging can be enabled with hw.snd.verbose=4.
the command set (only so long as the module is present):
o add db_command_register and db_command_unregister to add and remove
commands, respectively
o replace linker sets with SYSINIT's (and SYSUINIT's) that register
commands
o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table
for registering top-level commands, show operands, and show all operands,
respectively
While here also:
o sort command lists
o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases
for existing commands
o add "show all trace" as an alias for "show alltrace"
o add "show all locks" as an alias for "show alllocks"
Submitted by: Guillaume Ballet <gballet@gmail.com> (original version)
Reviewed by: jhb
MFC after: 1 month
- Retire IVARs for passing IRQs around. Instead, ppbus and ppc now allow
child devices to access the interrupt by via a rid 0 IRQ resource
using bus_alloc_resource_any().
- ppc creates its own interrupt event to manage the interrupt handlers of
child devices. ppc does not allow child devices to use filters. It
could allow this if needed, but none of the current drivers use them
and it adds a good bit of complication. It uses
intr_event_execute_handlers() to fire the child device interrupt handlers
from its threaded interrupt handler.
- Remove the ppbus_dummy_intr() hack. Now the ppc device always has an
interrupt handler registered and we no longer bounce all the way up to
nexus to manage adding/removing ppbus child interrupt handlers. Instead,
the child handlers are added and removed to the private interrupt event
in the ppc device.
On the i386 architecture, the processor only saves the current value
of `%esp' on stack if a privilege switch is necessary when entering
the interrupt handler. Thus, `frame->tf_esp' is only valid for
an entry from user mode. For interrupts taken in kernel mode, we
need to determine the top-of-stack for the interrupted kernel
procedure by adding the appropriate offset to the current frame
pointer.
Reported by: kris, Fabien Thomas
Tested by: Fabien Thomas <fabien.thomas at netasq dot com>
Because of using more clear and same time more functional codec parser
new driver is able to handle more codecs, use them better then before and
without most of previous quirks. All of tested codecs itself manage playback,
record, input mixing and monitoring quite fine. In all of investigated
trouble cases problem was found or in nonstandard codec usage or incorrect
codec configuration made by BIOS. Most of that cases could be fixed using
device hints, some of which are already included to the driver.
New driver supports multiple codecs per HDA bus, multiple audio function
groups per codec and multiple logical sound devices per audio function group.
So don't worry when you get several PCM devices instead of one, it is normal.
It is usual situation with powerful codecs to provide, for example, 3 PCM
devices: one for 7.1 playback and main recording, one for headset and one
for digital SPDIF I/O.
New driver implements Universal Audio Architecture (UAA) much better then
previous one. Most information about recommended codec usage now taken from
the codec configuration registers initialized by BIOS. User may alter that
configuration using device hints to reconfigure logical audio devices to
his needs in a very broad range up to the limits of the codec functionality.
New driver supports digital PCM playback and AC3 pass-through. I am not sure
about completeness of this implementation, but I have several success stories
including my own. Vchans subsystem does not support AC3 pass-through so it
had to be disabled for that devices at this moment.
New driver is ready for multichannel playback, but until our OSS is unable
to use this it will just duplicate same stereo stream into all channel
pairs.
New driver supports suspend/resume. I am unable to really test this part
myself, but I have got several success stories.
Driver has very informative verbose boot messages. So if you have any
questions or problems - enable and read them first.
Discussed on: freebsd-multimedia@
Tested by: many
- When searching for the next system drive, return the next one instead
of always returning the first one.
- Plug fd lead and make sure that the MLX_NEXT_CHILD ioctl is called
on the controller fd, not the disk's one.
While there, fix a cut-n-pase error in a warning.
Reviewed by: jhb
Approved by: kan (mentor)
MFC after: 1 month
detaching that when the USB is pulled out forcibly during the driver is
running background scan, a page fault can be occurred even if we called
usb_rem_task() when detaching. It looks like a kind of races.
be un-cached. Our previous memory barrier was not sufficient. This patch
allocates the IGP GART tables using the BUS_DMA_NOCACHE flag to get these
cards working.
Approved by: kib
calls to bus_dma. There were multiple paths that held different locks or
no locks at all. This patch ensures that all of the calling paths drop
their lock(s) before calling drm_pci_alloc().
Reviewed by: kib
the ncr53c9x.c core where it actually belongs so future front-ends
don't need to add it.
o Use the correct OFW property when looking for the initiator ID of the
SBus device.
o Don't specify an alignment when creating the parent DMA tag for
SUNW,fas; their DMA engine doesn't require an alignment constraint
and it's no inherited by the child DMA tags anyway (which probably
is a bug though).
o Drop the superfluous sc_maxsync and use sc_minsync instead. The
former apparently was added due to a confusion with the maximum
frequency used in cam(4), which basically corresponds to the
inverse of minimum sync period.
o Merge ncr53c9x.c from NetBSD:
1.116: NCRDMA_SETUP() should be called before NCR_SET_COUNT() and
NCRCMD_DMA command in ncr53c9x_select().
1.125: free allocated resources on detach.
o Static'ize ncr53c9x_action(), ncr53c9x_init() and ncr53c9x_reset()
as these are not required outside of ncr53c9x.c.
o In ncr53c9x_attach() don't leak the device mutex in case attaching
fails.
o Register an asynchronous notification handler so in case cam(4)
reports a lost device we can cancel outstanding commands and
restore the default parameters for the target in question.
o For FAS366 correctly support 16-bit target IDs and let it know
that we use 32-bit transfers.
o Overhaul the negotiation of transfer settings. This includes
distinguishing between current and goal transfer settings of the
target so we can renegotiate their goal settings when necessary
and correcting the order in which tagged, wide and synchronous
transfers are negotiated.
o If we are requesting sense, force a renegotiation if we are
currently using anything different from asynchronous at 8 bit
as the target might have lost our transfer negotiations.
o In case of an XPT_RESET_BUS just directly call ncr53c9x_init()
instead of issuing a NCRCMD_RSTSCSI, which in turn will issue an
interrupt that is treated as an unexpected SCSI bus reset by
ncr53c9x_intr() and thus calls ncr53c9x_init(). Remove the now
no longer used ncr53c9x_scsi_reset().
o Correct an off-by-one error when setting cpi->max_lun.
o In replace printf(9) with device_printf(9) calls where appropriate
and in ncr53c9x_action() remove some unnecessarily verbose messages.
o In ncr53c9x_sched() use TAILQ_FOREACH() instead of reimplementing
it and consolidate two tagging-related target info checks into one.
o In ncr53c9x_done() set the CAM status to CAM_SCSI_STATUS_ERROR when
appropriate, respect CAM_DIS_AUTOSENSE and teach it to return SCSI
status information.
o In ncr53c9x_dequeue() ensure the tags are cleared.
o Use ulmin() instead of min() where appropriate.
o In ncr53c9x_msgout() consistently use the reset label.
o When we're interrupted during a data phase and the DMA engine is
still active, don't panic but reset the core and the DMA engine as
this should be sufficient. Also, the typical problem for triggering
this was the lack of renegotiation when requesting sense.
o Correctly handle DEVICE RESETs.
o Adapt the locking of esp(4) to MPSAFE cam(4). This includes moving
the calls of lsi64854_attach() to the bus front-ends so it can pass
the esp(4) mutex to bus_dma_tag_create(9).
o Change the LSI64854 driver to not create a DMA tag and map for the
Ethernet channel as le(4) will handle these on its own as well as
sync and unload the DMA maps for the SCSI and parallel port channel
after a DMA transfer.
o Cam(4)'ify some NetBSD-centric comments.
o Use bus_{read,write}_*(9) instead of bus_space_{read,write}_*(9)
and take advantage of rman_get_rid(9) in order to save some softc
members.
Reviewed by: scottl
MFC after: 1 month
but needs a lot more work. In particular, it has no flow control and has
a tendency to race when giving commands. It still uses Giant for the
tty and driver lock, but this is a keep-it-simple feature for now.
Some of the [temporary] proliferation of messages lines are way too long.
reading from EEPROM doesn't seem to work on these controllers.
Reported by: Milan Obuch ( freebsd-net at dino dot sk )
Tested by: Milan Obuch ( freebsd-net at dino dot sk )
the device indicates that it wasn't able to write all the data in the
buffer out.
Ed Schouten doesn't like the idea of a panic here. I think for
production code, we need something better. For right now, while we're
trying to assess the impact of this issue, a panic is OK. So complain
to me, not him if this is hit.
The D_NEEDMINOR flag was introduced for drivers that do not actually
depend on storing a device unit/minor number, but require the ability to
address the cdevs by this number, which is used by clone_create().
The cpuctl(4) driver sets D_NEEDMINOR, even though it doesn't use the
clone_create() API. Remove the flag, because maybe we want to get rid of
it somewhere in the far future.
The syscons code disabled scroll lock inside sc_cnputs() if it's going
to print a system message. The code currently wants to process any TTY
output data as well, but we cannot do this, because the TTY lock is a
sleep mutex, while cnputs() picks up a spin mutex.
Disable the code for now. It solves a panic when a console message is
printed while scroll lock is enabled. One solution would be to
initialize a task structure here.
Reported by: Paul B. Mahol <onemda gmail com>
from umodem and ufoma.
With these changes, umodem kinda works for me now. It certainly gets
past the "tip" bug that I found earlier where 115200 wasn't a valid
baud rate. This was "broken" in the mpsafetty commit, but in reality,
umodem was always broken.
anholt thinks that he added this check as part of some regression testing,
but it is failing at least some of the time. I don't want to remove it
just yet. I added a bit of debugging to help identify the issue.
Approved by: kib
stopped nor the waiting state and also no other means to check
whether the receiver is idle (see also r163774), we have no choice
than to call mii_tick(9) unconditionally even in the case of the
DC_REDUCED_MII_POLL handling as far as the RX side is concerned.
This isn't necessarily worse than checking whether RX is idle
though because unlike as with TX we're racing with the hardware,
which might receive packets any time while we poll the MII, anyway.
Reported and tested by: Jacob Owens
Reviewed by: yongari
MFC after: 3 days
that there are 3 different interrupt enable bits, 2 for different
families of cards, and 1 for when MSI is used. Also apply a big
hammer backstop for cards that aren't recognized. This should fix
all of the interrupt issues at boot.
- changes in support of the VLAN filter fix to 126850
- removal of a bunch of legacy code that was cruft, if not
possibly harmful.
- removal of POLLING from this driver, with multiqueue and
MSIX it just makes no sense here.
- Fix an LRO bug that I've been working on internally, intermittent
panics under stress, the problem was releasing the RX ring lock
before the LRO flushing.
- Following the above fix I now enable LRO by default
- For performance reasons increase the default number of RX queues
to 4.
- Add AIM - "Adaptive Interrupt Moderation", a fancy way of saying
that the EITR value is dynamically changed based on the size of
packets in the last interrupt interval.
- Much goodness to try, enjoy!!
Use the much simpler cdevpriv for per-fd state and enable it. This allows
multiple opens of /dev/ipmi0 (e.g. using ipmitool while ipmievd is running
in the background).
MFC after: 1 week
- Added some additional code for debug builds.
- Fixed a problem printing physical memory on 64bit system during debugging.
- Modified some of the context memory and mailbox register names to more
clearly distinguish their use.
- Added memory barriers for Intel CPUs when accessing host memory data
structures which are written by hardware.
MFC after: Two weeks.
says that in such cases we can pick any interrupt. One of these cards
is the LG11 Wireless LAN card. I don't have one of these, but I do
know that this doesn't hurt any cards I've tried it with.
PR: 92070
Submitted by: Helge Oldach
MFC after: 3 days
first driver that does the configuration dance with CFE's. There's
likely some additional configuration that's needed to get things
working completely...
Split the driver into the core functionality part (sys/dev/tsec/if_tsec.c) and
the bus attachment (sys/dev/tsec/if_tsec_ocp.c).
This lets better integrate and maintain the driver in other environments with
different attachment abstractions (there is at least one other FreeBSD port --
MPC83xx -- which uses this TSEC driver, but with different local bus model
i.e. some OF derivative). While there, clean up and fix minor cosmetics.
Obtained from: Semihalf
taken from PR/121184 which was mechanically generated from similar
lists in the Linux ipaq driver. I then took the numbers we had in
usbdevs and filled in the right symbols and eliminated duplicates.
PR: 121184
