vxlan_ftable entries are sorted in ascending order, due to wrong arguments
order it is possible to stop search before existing element will be found.
Then new element will be allocated in vxlan_ftable_update_locked() and can
be inserted in the list second time or trigger MPASS() assertion with
enabled INVARIANTS.
PR: 224371
MFC after: 1 week
If a route is modified in a way that changes the route's source
address (i.e. the address used to access the gateway), then a
reference on the ifaddr representing the old source address will
be leaked if the address type does not have an ifa_rtrequest
method defined. Plug the leak by releasing the reference in
all cases.
Differential Revision: https://reviews.freebsd.org/D13417
Reviewed by: ae
MFC after: 3 weeks
Sponsored by: Dell
Previously, the counter was only incremented when m_append() failed. Since
the function can also fail on m_dup() now, increment the counter there as
well.
Sponsored by: Limelight Networks
Fix memory leak where mbuf chain wasn't free()d if iflib_ether_pad()
has a failure in m_dup().
Reported by: "Ryan Stone" <rysto32@gmail.com>
Sponsored by: Limelight Networks
If ethernet padding is enabled, and a read-only mbuf is passed,
it would modify the mbuf using m_append(). Instead, call m_dup() and
append to the new packet.
Reported by: Pyun YongHyeon
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13414
Some bnxt devices do not correctly send frames smaller than
52 bytes (without CRC), so add a quirk that will pad frames to an
arbitrary size before passing off to the encap routine.
Reported by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13269
The LRO possible test was calling CURVNET_SET once for IPv4 or IPv6 for
each packet in a chain. Only call it once per chain instead.
Submitted by: Matthew Macy <mmacy@mattmacy.io>
Reviewed by: cem, ae
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13368
- Updates tables in affected files with new entries from newer spec
revisions of SFF-8472, SFF-8024, and SFF-8636
- Change ifconfig to read and display the extended compliance code for
SFP media if the extended compliance code is not 0. This was being displayed
for QSFP transceivers only, but SFP28 media uses this to report 25G
capability.
Reviewed by: melifaro, sbruno
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D13286
SIOCGIFXMEDIA is required for extended ethernet media types,
but iflib did not support it.
Reported by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13312
used inside "if" statements comparing with another value.
Detailed explanation:
"if (a ? b : c != 0)" is not the same like "if ((a ? b : c) != 0)"
which is the expected behaviour of a function macro.
Affects:
toecore, linuxkpi and ibcore.
Reviewed by: kib
MFC after: 3 days
Sponsored by: Mellanox Technologies
If a device didn't support MSI-X, ctx->ifc_cpus would not be initialized,
but the IRQ allocation routines still uses the value. Move the
initialization to common code.
Sponsored by: Limelight Networks
type to any value. This can cause page faults and panics due to accessing
uninitialized fields in the "struct ifnet" which are specific to the network
device type.
MFC after: 1 week
Found by: jau@iki.fi
PR: 223767
Sponsored by: Mellanox Technologies
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
bit_nclear() takes the bit numbers for the start and end bits, not the start
and a count. This was resulting in memory corruption past the end of the
bitstr_t.
Sponsored by: Limelight Networks
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
The intent appears to be having one RX/TX queue set per core,
but since scctx->isc_n[tr]xqsets is set to max before calling
iflib_msix_init(), both end up being set to total number of cores.
Use ctx->ifc_sysctl_n[rt]xqs as the selected value and
scctx->isc_n[rt]xqsets as the max. This should result in what appears
to be the intended behaviour
Reviewed by: sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13096
boot for the received packets.
The rcv_tstmp field overlaps the place of Ln header length indicators,
not used by received packets. The basic pkthdr rearrangement change
in sys/mbuf.h was provided by gallatin.
There are two accompanying M_ flags: M_TSTMP means that there is the
timestamp (and it was generated by hardware).
Another flag M_TSTMP_HPREC indicates that the timestamp is
high-precision. Practically M_TSTMP_HPREC means that hardware
provided additional precision comparing with the stamps when the flag
is not set. E.g., for ConnectX all packets are stamped by hardware
when PCIe transaction to write out the completion descriptor is
performed, but PTP packet are stamped on port. For Intel cards, when
PTP assist is enabled, only PTP packets are stamped in the limited
number of registers, so if Intel cards ever start support this
mechanism, they would always set M_TSTMP | M_TSTMP_HPREC if hardware
timestamp is present for the given packet.
Add IFCAP_HWRXTSTMP interface capability to indicate the support for
hardware rx timestamping, and ifconfig(8) command to toggle it.
Based on the patch by: gallatin
Reviewed by: gallatin (previous version), hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks (? mbuf KBI issue)
X-Differential revision: https://reviews.freebsd.org/D12638
Preserve packet order between tcp_lro_rx() and if_input() to avoid
creating extra corner cases. If no packets can be LROed, combine them
into one chain for submission via if_input(). If any packet can
potentially be LROed however, retain old behaviour and call if_input()
for each packet.
This should keep the 12% improvement for small packet forwarding intact,
but mostly avoids impacting the LRO case.
Reviewed by: cem, sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12876
even if kernel routing table already has a route to the address in question
installed by some routing daemon (PR 223129).
Also, allow loopback route deletion when stopping a VIMAGE jail (PR 222647).
PR: 222647, 223129
Reviewed by: gnn
Approved by: avg (mentor), mav (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12747
The VNET_SYSUNINIT() callback is executed after the MOD_UNLOAD. That means
that netisr_unregister() has already been called when
netisr_unregister_vnet() gets calls, leading to an assertion failure.
Restore the expected order of operations by performing everything that
was done in MOD_UNLOAD to a SYSUNINIT() (that will be called after the
VNET_SYSUNINIT()).
Differential Revision: https://reviews.freebsd.org/D12771
ifl_pidx and ifl_credits are going out of sync in _iflib_fl_refill() as they
use different update log. Use the same update logic for both, and add a
final call to isc_rxd_refill() to handle early exits from the loop.
PR: 221990
Reported by: pho
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12798
iru_init() was declared and used outside the DEV_NETMAP
conditional blocks, but was implemented inside one. Move the
implementation out of the DEV_NETMAP block to allow building with
netmap disabled.
Reported by: Andrew Turner <andrew@fubar.geek.nz>
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12842
Fix error when refilling netmap buffers that resulted in the first
buffer of the successive passes through ifl_bus_addrs[] leaving the
first value unset (tmp_pidx started at 1, not zero after the first time
through the loop).
Leave the one unused buffer required by some NICs visible in the netmap
ring rather than hidden. There will always be a buffer in use by the
kernel now when an iflib driver is used via netmap.
Always get the netmap slot index via netmap_idx_n2k() to account for
nkr_hwofs in a consistent way.
Split shared functionality into new functions.
iru_init(): shared by _iflib_fl_refill() and netmap_fl_refill()
netmap_fl_refill(): shared by iflib_netmap_rxsync() and
iflib_netmap_rxq_init()
PR: 222744
Reported by: Shirkdog <mshirk@daemon-security.com>
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12769
It was reported on the community call that with
hw.pci.enable_msix=0, iflib would enable MSI-X on the device and attempt
to use it, which caused issues. Test the sysctl explicitly and do not
enable MSI-X if it's disabled globally.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12805
1. prefetch 128 bytes of mbufs.
2. Re-order filling the pkt_info so cache stalls happen at the end
3. Define empty prefetch2cachelines() macro when the function isn't present.
Provides small performance improvments on some hardware
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12447
HEAD. Enable VIMAGE in GENERIC kernels and some others (where GENERIC does
not exist) on HEAD.
Disable building LINT-VIMAGE with VIMAGE being default.
This should give it a lot more exposure in the run-up to 12 to help
us evaluate whether to keep it on by default or not.
We are also hoping to get better performance testing.
The feature can be disabled using nooptions.
Requested by: many
Reviewed by: kristof, emaste, hiren
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12639
Allocate smallest unit number from pool via ifc_alloc_unit_next()
and exact unit number (if available) via ifc_alloc_unit_specific().
While here, address possible deadlock (mentioned in PR).
PR: 217401
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D12551
Improved logging added in r323879 exposed an error during
attach. We need the irq, not the rid to work correctly. em uses
shared irqs, so it will use the same irq for TX as RX. bnxt does
not use shared irqs, or TX irqs at all, so there's no need to set
the TX irq affinity.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12496
GPUs: radeonkms, i915kms
NICs: if_em, if_igb, if_bnxt
This metadata isn't used yet, but it will be handy to have later to
implement automatic module loading.
Reviewed by: imp, mmacy
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12488
Move TX out of the enqueue() path. As a result, we need
to have ifmp_ring_check_drainage() pick up from the abdicate state.
We also need to either enqueue the TX task, or check drainage
after calling ifmp_ring_enqueue() to ensure it's sent.
This change results in a 30% small packet forwarding improvement.
Reviewed by: olivier, sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12439
This allows tuning the rx budget for special load profiles
as well as more easily testing to determine sane defaults.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12445
Build a list of mbufs to pass to if_input() after LRO. Results in
12% small packet forwarding rate improvement.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12444
If the packet is smaller than MTU, disable the TSO flags.
Move TCP header parsing inside the IS_TSO?() test.
Add a new IFLIB_NEED_ZERO_CSUM flag to indicate the checksums need to be zeroed before TX.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12442
This ensures that the loader will not load the module if it's also built in to
the kernel.
PR: 220860
Submitted by: Eugene Grosbein <eugen@freebsd.org>
Reported by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
RXQ setup for netmap was broken because netmap_rxq_init was getting called
before IFDI_INIT - thus we ended up with ring tail pointer being reset to zero.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12140
indicating whether the page's wire count transitioned to zero. Use that
return value in zbuf_page_free() rather than checking the wire count.
MFC after: 1 week
This was really too big of a commit even if everything worked, but there
are multiple new issues introduced in the one huge commit, so it's not
worth keeping this until it's fixed.
I'll work on splitting this up into logical chunks and introduce them one
at a time over the next week or two.
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
by Matt Macy as well as other changes which he has accepted via pull
request to his github repo at https://github.com/mattmacy/networking/
This should bring -CURRENT and the github repo into close enough sync to
allow small feature branches rather than a large chain of interdependant
patches being developed out of tree. The reset of the synchronization
should be able to be completed on github by splitting the remaining
changes that are not yet ready into short feature branches for later
review as smaller commits.
Here is a summary of changes included in this patch:
1) More checks when INVARIANTS are enabled for eariler problem
detection
2) Group Task Queue cleanups
- Fix use of duplicate shortdesc for gtaskqueue malloc type.
Some interfaces such as memguard(9) use the short description to
identify malloc types, so duplicates should be avoided.
3) Allow gtaskqueues to use ithreads in addition to taskqueues
- In some cases, this can improve performance
4) Better logging when taskqgroup_attach*() fails to set interrupt
affinity.
5) Do not start gtaskqueues until they're needed
6) Have mp_ring enqueue function enter the ABDICATED rather than BUSY
state. This moves the TX to the gtaskq and allows processing to
continue faster as well as make TX batching more likely.
7) Add an ift_txd_errata function to struct if_txrx. This allows
drivers to inspect/modify mbufs before transmission.
8) Add a new IFLIB_NEED_ZERO_CSUM for drivers to indicate they need
checksums zeroed for checksum offload to work. This avoids modifying
packet data in the TX path when possible.
9) Use ithreads for iflib I/O instead of taskqueues
10) Clean up ioctl and support async ioctl functions
11) Prefetch two cachlines from each mbuf instead of one up to 128B. We
often need to parse packet header info beyond 64B.
12) Fix potential memory corruption due to fence post error in
bit_nclear() usage.
13) Improved hang detection and handling
14) If the packet is smaller than MTU, disable the TSO flags.
This avoids extra packet parsing when not needed.
15) Move TCP header parsing inside the IS_TSO?() test.
This avoids extra packet parsing when not needed.
16) Pass chains of mbufs that are not consumed by lro to if_input()
rather call if_input() for each mbuf.
17) Re-arrange packet header loads to get as much work as possible done
before a cache stall.
18) Lock the context when calling IFDI_ATTACH_PRE()/IFDI_ATTACH_POST()/
IFDI_DETACH();
19) Attempt to distribute RX/TX tasks across cores more sensibly,
especially when RX and TX share an interrupt. RX will attempt to
take the first threads on a core, and TX will attempt to take
successive threads.
20) Allow iflib_softirq_alloc_generic() to request affinity to the same
cpus an interrupt has affinity with. This allows TX queues to
ensure they are serviced by the socket the device is on.
21) Add new iflib sysctls to net.iflib:
- timer_int - interval at which to run per-queue timers in ticks
- force_busdma
22) Add new per-device iflib sysctls to dev.X.Y.iflib
- rx_budget allows tuning the batch size on the RX path
- watchdog_events Count of watchdog events seen since load
23) Fix error where netmap_rxq_init() could get called before
IFDI_INIT()
24) e1000: Fixed version of r323008: post-cold sleep instead of DELAY
when waiting for firmware
- After interrupts are enabled, convert all waits to sleeps
- Eliminates e1000 software/firmware synchronization busy waits after
startup
25) e1000: Remove special case for budget=1 in em_txrx.c
- Premature optimization which may actually be incorrect with
multi-segment packets
26) e1000: Split out TX interrupt rather than share an interrupt for
RX and TX.
- Allows better performance by keeping RX and TX paths separate
27) e1000: Separate igb from em code where suitable
Much easier to understand separate functions and "if (is_igb)" than
previous tests like "if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))"
#blamebruno
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12235
Normally after receiving a packet, a vlan(4) interface sends the packet
back through its parent interface's rx routine so that it can be
processed as an untagged frame. It does this by using the parent's
ifp->if_input. This is incompatible with netmap(4), which replaces the
vlan(4) interface's if_input with a netmap(4) hook. Fix this by using
the vlan(4) interface's ifp instead of the parent's directly.
Reported by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: rstone
Approved by: rstone (mentor)
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12191
report extended media types.
lacp_aggregator_bandwidth() uses the media to determine the speed of the
interface and returns 0 for IFM_OTHER without the bits in the extended
range.
Reported by: kbowling@
Reviewed by: eugen_grosbein.net, mjoras@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D12188
