Remove an old workaround that is no longer necessary since rS343824.
There used to be a problem with FMan interrupts firing on multiple CPUS
at the same time.
This ended up being due to multicast interrupts being unsupported in the
Freescale PIC (so instead of using a selection algorithm, it would do some
unspecified action, such as interrupting multiple cpus at random.)
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23829
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE.
Reviewed by: royger
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23638
When turning IBRS mitigation using sysctl, as opposed to loader tunable,
send IPI to tweak MSR on all cores. Right now code only performed MSR write
onr the CPU where sysctl was run.
Properly report hw.ibrs_active for IBRS_ALL. Split hw_ibrs_ibpb_active out
from ibrs_active, to keep the current semantic of guiding kernel entry and
exit handlers.
Reported and tested by: mav
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
key-codes from the USB keyboard. Negative key-codes are currently skipped.
While at it use the bit size value provided by the HID location structure
instead of assuming a value of 8.
This fixes a regression issue after r357861.
Reported by: Minoru TANABE <kotanabe3@gmail.com>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
commands have completed.
It's not OK to force complete any pending commands before we send the
REMOVE_DEVICE. Instead, make sure that all pending commands are complete before
sending that. By trying to second guess the firmware here, we run the risk of
completing commands twice, which leads to corruption.
This removes the forced completion of commands introduced in r218811. So it's a
partial backout of that commit, but replaces it with a more rebust
mechanism. Either these commands will complete due to the TARGET RESET, or they
will timeout and be aborted, but they will all complete.
Add assert that all commands are complete to REMOVE_DEVICE completion
routine. We attempt to assure this programatically, so we shouldn't have any
commands in the queue because we've waited for them all. Any commands that make
it into our action routine after we mark the target in removal will complete
immediately with an error.
When we're removing a target that's not a volume, advertise up the stack that
it's actually gone, as opposed to having a transient selection error we should
retry. Do this both in the action routine, and when we get a notification of an
aborted command. We don't do this for volumes because the driver tries hard not
to advertise to the OS a volume has disappeared.
Apply these changes to both mpr and mps since they are based on quite similar
designs.
Discussed with: scottl@
Differential Revision: https://reviews.freebsd.org/D23768
After the network epoch was added, we lost the ability to migrate the
ithread in the middle of dispatch, as being in the network epoch will pin
the current thread (for safety reasons.)
Luckily, we don't actually have to do this workaround in the first place,
as we can just bind it to the correct cpu when we preallocate it.
Pass dev through to XX_PreallocAndBindIntr() and actually bind it to the
cpu like it was supposed to in the first place, instad of leaving it
floating and moving it to the correct cpu the first time it fires.
This fixes panics while bringing up dtsec on my X5000.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23826
switch over to opt-in instead of opt-out for epoch.
Instead of IFF_NEEDSEPOCH, provide IFF_KNOWSEPOCH. If driver marks
itself with IFF_KNOWSEPOCH, then ether_input() would not enter epoch
when processing its packets.
Now this will create recursive entrance in epoch in >90% network
drivers, but will guarantee safeness of the transition.
Mark several tested drivers as IFF_KNOWSEPOCH.
Reviewed by: hselasky, jeff, bz, gallatin
Differential Revision: https://reviews.freebsd.org/D23674
if_capabilities indicates capabilities supported by the hardware;
if_capenable which are enabled. Note that rx checksum is still disabled
in the driver at compile time.
Submitted by: Johannes <iz-rpi04@hs-karlsruhe.de>
MFC after: 2 weeks
Driver working in LLQ mode in some cases can send only few last segments
of the mbuf using DMA engine, and the rest of them are sent to the
device using direct PCI transaction. To map the only necessary data, two DMA
maps were used. That solution was very rough and was causing a bug - if
both maps were used (head_map and seg_map), there was a race in between
two flows on two queues and the device was receiving corrupted
data which could be further received on the other host if the Tx cksum
offload was enabled.
As it's ok to map whole mbuf and then send to the device only needed
segments, the design was simplified to use only single DMA map.
The driver version was updated to v2.1.1 as it's important bug fix.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23636
If a failure happens reading the lid state, assume the lid is opened.
Suggested by: cem @
Differential Revision: https://reviews.freebsd.org/D23724
PR: 240881
MFC after: 1 week
Sponsored by: Mellanox Technologies
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all low hanging fruits as MPSAFE.
Reviewed by: markj
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23626
The index should be computed as distance from arg[0] and not
the beginning of struct mlx5_ib_congestion .
While at it fix a use of zero length array to avoid depending
on undefined compiler behaviour.
MFC after: 1 week
Sponsored by: Mellanox Technologies
While at it update the sysctl(9) description for the lid state.
Differential Revision: https://reviews.freebsd.org/D23724
PR: 240881
Submitted by: Yuri Pankov <yuripv@yuripv.me>
MFC after: 1 week
Sponsored by: Mellanox Technologies
When we register an interrupt handler we need to pass the intr_type along in
bus_setup_intr().
The interrupt type matters because it is used to decide if we need to enter
NET_EPOCH. That meant that vtmmio-based if_vtnet did not, which led to panics
with INVARIANTS set.
Sponsored by: Axiado
The epoch stuff with taskqueues works fine if the driver never calls
the receive path in other contexts, but this driver does. If there was
a chip reset during active receive then part of the reset will call
the receive path to flush out any active packets before reinitialising
the receive queue and that needs to be done with the epoch held.
So:
* make the receive task a normal task again
* explicitly call epoch enter/exit around the legacy and newer DMA
receive paths
* add a couple of epoch asserts to ensure that the receive packet
path itself is called with epoch held.
This fixes it on my Atom eeepc laptop (circa 2010!) that I did
all of my initial 802.11n work in this driver and net80211.
Tested:
* AR9285, STA mode
TODO:
* Test on EDMA chipset (AR9380)
* Test in AP/adhoc modes, just to be sure (eg for beacon
receive processing in particular.)
ACPI Control Method Batteries have a _BIF and/or _BIX object which
provide static properties of the battery. FreeBSD acpi_cmbat module
supported _BIF object only, which was deprecated as of ACPI 4.0.
_BIX is an extended version of _BIF defined in ACPI 4.0 or later.
As of writing, _BIX has two revisions. One is in ACPI 4.0 (rev.0) and
another is in ACPI 6.0 (rev.1). It seems that hardware vendors still
stick to _BIF only or _BIX rev.0 + _BIF for the maximum compatibility.
Microsoft requires _BIX rev.0 for Windows machines, so there are some
laptop machines with _BIX rev.0 only. In this case, FreeBSD does not
recognize the battery information.
After this change, the acpi_cmbat module gets battery information from
_BIX or _BIF object and internally uses _BIX rev.1 data structure as
the primary information store in the kernel. ACPIIO_BATT_GET_BI[FX]
returns an acpi_bi[fx] structure built by using information obtained
from a _BIF or a _BIX object found on the system. The revision number
field can be used to check which field is available. The acpiconf(8)
utility will show additional information if _BIX is available.
Although ABIs of ACPIIO_BATT_* were changed, the existing APIs for
userland utilities are not changed and the backward-compatible ABIs
are provided. This means that older versions of acpiconf(8) can also
work with the new kernel. The (union acpi_battery_ioctl_arg) was
padded to 256 byte long to avoid another ABI change in the future.
A _BIX object with its revision number >1 will be treated as
compatible with the rev.1 _BIX format.
Reviewed by: takawata
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23728
buffer group.
This fixes a bug where congestion drops on port 1 of a T6 card would
incorrectly be counted as drops on port 0.
MFC after: 1 week
Sponsored by: Chelsio Communications
We need this to use EARLY_DRIVER_MODULE in child drivers on arm64. This
should be a no-op on x86 as it has DRIVER_MODULE in the nexus driver making
all later drivers attach in the last pass.
Reviewed by: imp
MFC after: 1 month
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23717
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Reviewed by: imp, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23633
Fix the following -Werror warning from clang 10.0.0 in hptmv(4):
sys/dev/hptmv/ioctl.c:240:4: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
_vbus_p=pArray->pVBus;
^
sys/dev/hptmv/ioctl.c:237:10: note: previous statement is here
if(!mIsArray(pArray))
^
This is because the return statement after the if statement was not
indented. (Note that this file has been idented assuming 4-space tabs.)
MFC after: 3 days
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Reviewed by: hselasky, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23632
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Reviewed by: kib, trasz
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23640
The upstream OpenSSL changes only set the cipher for GCM since the
authentication is redundant, and changes to OCF will soon remove the
GCM authentication algorithm constants entirely for the same reason.
In addition, ktls_create_session() already validates these fields and
wouldn't pass down an invalid auth_algorithm value to any drivers or
ktls backends.
Reviewed by: hselasky
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23671
It duplicated the kern_tls_records stat and was not conditional on NIC
TLS being enabled.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23670
Initialize the FCH SMBus controller for Hygon Dhyana CPU.
Set the vendor of the FCH description via the exact CPU vendor.
Submitted by: Pu Wen <puwen@hygon.cn>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23558
Add support for decoding pressed keys as a bitmap. The keys in the
bitmap are described in the interface specific HID descriptor. Some
keyboards even have multiple input interfaces, only using the bitmap
method when the event array is full. That typically means when more
than seven keys are pressed simultaneously.
The internals of the USB keyboard driver have been slightly reworked
to keep track of all keys in a single bitmap having 256 bits. This
bitmap is then divided into blocks of 64-bits as an optimisation.
Simplify automatic key repeat logic, because only the last key pressed
can be repeated.
PR: 224592
PR: 233884
Tested by: Alex V. Petrov <alexvpetrov@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
It was saved from the initial purge of drivers in fcp-101 due to being
the onboard Ethernet device on a number of sparc64 machines. Now that
sparc64 is gone, it serves little purpose (PCI cards exist, but are rare
and are unlikely to have been deployed outside Sun systems).
MFC after: 3 days
Platform (N1SDP).
Neoverse N1 is a high-performance ARM microarchitecture designed
by the ARM Holdings for the server market.
The PCI part on N1SDP was shipped untested and suffers from some
integration issues.
For instance accessing to not existing BDFs causes System Error
(SError) exception. To mitigate this, the firmware scans the bus,
catches SErrors and creates a table with valid BDFs. That allows
us to filter-out accesses to invalid BDFs in this driver.
Also the root complex config space (BDF == 0) has an unusual
location in memory map, so remapping accesses to it is required.
Finally, the config space is restricted to 32-bit accesses only.
This was tested on the ARM boxes kindly provided by the ARM Ltd
to the DARPA CHERI Project.
In collaboration with: andrew
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D23349
This patch introduces processing of the frames
up to 9kB by the mvneta driver. Some versions of
this NIC limit TX checksum offloading, depending
on the frame size, so add appropriate handling
of this feature.
Submitted by: Kornel Duleba
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D23225
