Commit Graph

81371 Commits

Author SHA1 Message Date
jmallett
71de896c12 Reference the correct local variable in all parts of a for loop, so we
operate on the correct data (properly).

Tracked down by:	Dan Nelson
2002-10-08 21:29:04 +00:00
jeff
29006c0306 - Remove LK_INTERLOCK from the vn_lock() in ffs_snapshot().
Pointy hat to:	me
Found by:	green
2002-10-08 21:00:52 +00:00
jmallett
9bfc1ff68c Remove the wargames(6) novelty [and not the fun kind]:
1) It never was very funny.
	2) It was a N line shell script where N is less than
	   X, where X is the number of lines of the Berkeley
	   copyright and license.
	3) I rewrote it in C with the intention of making it
	   more interactive, ala the movie, but never did.
	4) Because it really is possible for at least some
	   parts of a distribution to shrink between releases.

X-No-MFC:	This game will remain in RELENG_4 and previous.
X-Bikesheds-To:	markm@
Approved by:	The #bsdcode cabal.
Obtained from:	Professor Falken
2002-10-08 20:19:26 +00:00
jmallett
41b0e03e7c We're missing none of these games, they just aren't here. 2002-10-08 20:15:30 +00:00
jhb
5a64f9c84e Spell 'Temperature' correctly. 2002-10-08 19:41:12 +00:00
sos
bc46f827dc Fix for the panic when using a Promise TX2.
The problem is that the code does a check for the granparent of
the Promise chip, if this is a bridge of the right type, we have
a TX4 on our hands, and need to handle that ones "issues".
Now the grandparent check cause subtle bugs in the newbus system,
mainly that pci_get_devid doesn't return an error value.
This patch works around the issue by using BUS_READ_IVAR() instead.
2002-10-08 18:25:10 +00:00
jhb
4c2a550344 Revert MEM_USR back to 0xa000 for BTX clients. Instead, adjust boot2
to run at 0xc000 by changing its virtual start address from 0x1000 to
0x2000.

Tested by:	phk
2002-10-08 18:19:02 +00:00
archie
503c2bfc5f Add MLINKS to kse.2. 2002-10-08 17:43:40 +00:00
ken
13b9c6f277 Fix the location of the length bytes in the 12-byte read/write CDB
structure.  This has been broken since 1998, but probably hasn't been
noticed because it takes a read/write of 64K blocks (32MB with 512 byte
blocks) to trigger using the 12 byte read/write CDB in scsi_read_write().

Submitted by:	"Moore, Eric Dean" <emoore@lsil.com>
MFC after:	3 days
2002-10-08 17:12:44 +00:00
phk
07c608aac1 Now that ufsread.c doesn't do 64bit divide remainder operations,
don't bother with libkern.

Sponsored by:	DARPA & NAI Labs.
2002-10-08 15:49:35 +00:00
phk
a2f1fdc5bf Save a couple of bytes by not returning ints nobody care about.
Sponsored by:	DARPA & NAI labs
2002-10-08 15:48:43 +00:00
phk
8eaa35ca87 It seems that the only problem with UFS2 booting on i386 is the 64bit
divide/remainder calls.  For reasons not resolved, compiling the
relevant routines from libkern into boot2 results in stack corruption.

Do the simple thing: Don't use 64bit divide/remainder operations.

Sponsored by:	DARPA & NAI Labs
2002-10-08 15:46:45 +00:00
jhb
bda41137cf Don't panic for a bad ivar request, just return ENOENT. 2002-10-08 15:44:35 +00:00
nyan
9b2e99b34d MFi386: revision 1.67. 2002-10-08 12:54:56 +00:00
nyan
42ff9b4a07 MFi386: revisions 1.539, 1.540 and 1.541. 2002-10-08 12:53:26 +00:00
nyan
4c34626aa8 Fix to support pc98. 2002-10-08 12:13:19 +00:00
green
7a416624c8 Reinstate rev 1.36 with an important line that got missed. Note this
also improves the "random undocumented offsets into various memory
spaces" a little bit.
2002-10-08 12:09:16 +00:00
tjr
33d1a8b9c2 Do not strip CTL* escapes from redirection filenames in argstr(); they
are later stripped with rmescapes() in expandarg(). If the filename has
already been unescaped, doing it again in rmescapes() can walk off the
end of the string, leading to memory corruption and eventually SIGSEGV.

Noticed by:	kris
2002-10-08 11:22:49 +00:00
phk
ecc00e796c Remove unused TYPE_WD and TYPE_WFD. 2002-10-08 10:17:16 +00:00
phk
b8d521263b Correctly calculate dmadat: We need to take the address of _end, it's
contents is irrelevant and likely to be zero;

This doesn't change the resultant value, but it does save a couple of bytes
because &_end is constant.
2002-10-08 10:15:42 +00:00
jmallett
b4ee6ee142 Make it possible to kldload(8) many modules.
MFC after:	2 months
Sponsored by:	Bright Path Solutions
Reviewed by:	tjr
2002-10-08 09:57:03 +00:00
phk
6f7830c860 Unbreak boot2 by backing out rev 1.36 to Makefile, which does not
work as advertised:

	bang# pwd
	/bang/src/sys/boot/i386/boot2
	bang# make clean >& /dev/null
	bang# cvs -q update -r 1.35 Makefile >& /dev/null
	bang# make >& /dev/null
	bang# cat /usr/obj/`pwd`/boot2.h
	#define XREADORG 0x725
	bang# cvs -q update -r 1.36 Makefile > & /dev/null
	bang# make clean > & /dev/null
	bang# make > & /dev/null
	bang# cat /usr/obj/`pwd`/boot2.h
	#define XREADORG 0x25
	bang#
2002-10-08 07:52:28 +00:00
phk
7b7ec527aa Allow for multiple #includes of this file. 2002-10-08 07:24:19 +00:00
phk
24fb0bb017 Save four bytes by shortening a string two chars.
Sponsored by:	DARPA & NAI Labs.
2002-10-08 07:06:24 +00:00
phk
865428f1db For now, don't wait for drives to stop returning EBUSY. There is too
much broken harware around it seems.

Sponsored by:	DARPA & NAI Labs.
2002-10-08 07:03:58 +00:00
murray
4e8fedbd21 FreeBSD 4.7 enters the BSD family tree sometime on October 8, 2002. 2002-10-08 05:25:58 +00:00
bmah
0b623c28ba Teach pkg_add -r how to find 4.7-RELEASE packages with an appropriate
osreldate.

(Actually, due to differences in package compression formats, I'm
not sure that a -CURRENT pkg_add -r will do the right thing in
this case, once it finds them.)
2002-10-08 05:15:21 +00:00
murray
d1483e4e0c We now use XFree86-4 packages rather than a special XFree86-3
distribution, so this script is no longer needed.
2002-10-08 05:06:05 +00:00
dd
eff660789c Treat the pathptrn field as a real pattern with the aid of fnmatch(). 2002-10-08 04:21:54 +00:00
dd
ad77581032 Import the libc fnmatch() into the kernel. This will be used by,
among other things, the DEVFS rule subsystem to match nodes against a
path pattern supplied by the user.

fnmatch.c was repo-copied from src/lib/libc/gen/fnmatch.c, and the
only changes to it are those necessary to make it compile in the
kernel.  The relevant parts of fnmatch.h were imported into libkern.h.

Approved by:	-arch
2002-10-08 04:15:55 +00:00
imp
2af88da4a8 Make kldunload cbb work:
o Implement the thread killing interlock as described by jhb in arch@
  while talking to markm.
o Hold Giant around cbb_insert()/cbb_remove().  Deep in the belly of
  the vm code we panic if we don't hold this when we activate the memory
  for reading the CIS.
o If we had to do the kludge alloc, then do a kludge free.
2002-10-08 03:53:52 +00:00
kan
cb71b7bb07 Add device driver for Belkin F5U103 and compatible USB-to-serial adapters.
Reviewed by:	n_hibma
Approved by:	obrien
2002-10-08 03:09:57 +00:00
kan
10814c1dc0 Regen after usbdevs rev. 1.102.
Reviewed by:	n_hibma
Approved by:	obrien
2002-10-08 03:04:14 +00:00
kan
7c3444e142 Add entries for:
Belkin F5U103
	Belkin F5U120-PC Hub
	GoHubs GoCOM232
	Peracom single port
USB-to-serial adapters.

Reviewed by:	n_hibma
Approved by:	obrien
2002-10-08 03:00:37 +00:00
tjr
50bdbd28da Re-add the code which maps POSIX standard library names into the ones
FreeBSD uses; f.e. -lpthread -> -pthread, -lxnet -> nothing.
2002-10-08 02:19:54 +00:00
imp
56fe29cbbf Introducing /dev/devctl. This device reports events in the
configuration device hierarchy.  Device arrival, departure and not
matched are presently reported.  This will be the basis for devd, which
I still need to polish a little more before I commit it.  If you don't
use /dev/devctl, it will be a noop.
2002-10-07 23:17:44 +00:00
imp
9aab9af803 Two minor bugfixes:
o Allow the bus_debug variable to be set via the bus.debug tunable.
o Return pnpinfo and location info via the devinfo interface to userland.
  devinfo(8) needs to be updated to print it.
2002-10-07 23:15:40 +00:00
imp
7ef36b2111 MFp4:
o Better resume code.  Move the comments around.  Force the socket state to
  be querried.  Ack the interrupts properly.
o Intercept the interrupt requests and keep a list of interrupts to service
  ourselves.  When the card attaches, set its OK bit.  When we get a card
  status change interrupt for that card, clear the OK bit.  Don't call the
  ISR if the OK bit is cleared.  Iwasaki-san and yamamoto-san have both
  sent me patches that fix the same problem this fixes, but at the pccard
  level.
o Try to get the signalling of the thread to actually die.  This might not be
  100% right, but it is less wrong than before.
o Add a SIC next to a TI type that looks like it could be wrong, but isn't.
2002-10-07 23:11:29 +00:00
imp
a08ac34c17 o Add a nomatch routine so we whine when we don't know what to attach to
the card.
o Add comments about how we're doing the CIS activation.
o Add location and pnp info functions.
o Add better code to hopefully deal with ata cards better (and other drivers
  that allocate resources that we didn't preallocate from the CIS).  OLDCARD
  used to allow it, but NEWCARD was pickier.  I'm not 100% sure this works,
  but it doesn't break anything.
2002-10-07 23:05:33 +00:00
imp
61ae73678b Merge changes from NetBSD through version 1.17 of this file. These
give us slightly better error checking than before and interpret what
default bits mean better.  See the NetBSD CVS tree for the authors of
these changes (revs 1.10 .. 1.17).
2002-10-07 23:03:17 +00:00
imp
f7540bad93 o Add routines to return the location and pnpinfo for this card.
Note, we return the PCI pnp info, but in fact that's wrong to do
  since that data is not defined for CardBus cards.  CardBus says that
  these registers are undefined and one should use the CIS to do
  device matching.  To date, all CardBus cards have had these
  registered defined, no doubt because they are using common silicon
  to produce both the PCI cards and the CardBus cards.  However, it isn't
  any worse than the rest of the system, so just note it in passing and
  move on.
o Also sort prototypes while I'm here.
2002-10-07 23:00:51 +00:00
imp
2046d1c9de Don't abuse the fact that -a == ~a + 1. Signed vs unsigned checkers
complain when a is a unsigned type.  So instead use the latter here
and be on our way.

Spotted by: flexlint by way of phk
2002-10-07 22:58:24 +00:00
imp
79238a644f Add extra set of parens around the barbit macro to make it clear what
we're intending to shift.

Spotted by: flexlint by way of phk (should fix about 40 messages)
2002-10-07 22:57:07 +00:00
green
6c65d531e9 Correct a bug in adding 0x700 to a number. 2002-10-07 22:21:16 +00:00
phk
881f1b527c Conditionalize the number of sectors loaded by boot1.s on UFS1/UFS12.
Conditionalize the "XX bytes left" checks reference on UFS1/UFS12.

Conditionally build the necessary 64bit math for boot2 if UFS12.

Sponsored by:	DARPA & NAI Labs.
2002-10-07 21:36:06 +00:00
mike
981ed72beb Remove duplicate uninstalled aio.h header. 2002-10-07 21:18:30 +00:00
thomas
01d6c8879f Document behaviour change in reboot(8) introduced in reboot.c rev. 1.17:
when using '-p' with reboot, and the power down action failds, reboot
the system normally. The behaviour of 'halt -p' and of shutdown(8) is
unchanged.

Approved by:	roberto
2002-10-07 21:18:20 +00:00
phk
6cc4e6467c Change the comment character from # to // in boot1.s and run
it through CPP so we can conditionalized things.

Sponsored by:	DARPA & NAI Labs
2002-10-07 20:56:09 +00:00
iedowse
cbd79f434a Add back a fdrop() call at the end of kern_open() that got lost in
revision 1.218. This bug caused a "struct file" reference to be
leaked if VOP_ADVLOCK(), vn_start_write(), or mac_check_vnode_write()
failed during the open operation.

PR:		kern/43739
Reported by:	Arne Woerner <woerner@mediabase-gmbh.de>
2002-10-07 20:49:22 +00:00
sam
ee6c62e3fe Track openbsd changes that don't affect us yet (PK supoprt is
currently disabled):

o Don't use constants for the output parameter, use the iparam count as a
  pointer to the first result location.
o Fix bits vs bytes counting problems.
o Split out the hardware and software normalization versions of modexp.
o Enable hardware normalization for chips that support it.
o On reset, disable hardware normalization for 582x and make sure the
  chip is in little endian mode.
o Since sw normalization is now the only option, simplify normalization
  handling.

Also fix RNG harvesting: disabling PK support (for the moment) had disabled
the MCR2 interrupt; consider both KEY support and RNG support when deciding
whether or not to enable it.

Obtained from:	openbsd
2002-10-07 20:02:34 +00:00