Report status from dword0 for passthru commands. Many commands report
some status or information here, so reporting it can help know what's
going on.
Sponsored by: Netflix
The general style in sbin/nvmecontrol apppears to print uint64_t types
using %j, so I'm using that instead of the more general (but admittedly
ugly) PRIu64.
Add decoding of the Device Self-test log page and the ability to start
or abort a test.
Reviewed by: imp, mav
Tested by: Muhammad Ahmad <muhammad.ahmad@seagate.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27517
- inserting missing end of block: Ss breaks Bl
- skipping paragraph macro: Pp before Ss
- referenced manual not found: Xr nvme 4 (2 times)
- unknown standard specifier: St The
The macro .St can only be used for standards known by mdoc(7). So add a
SEE ALSO section and add a reference to the NVM Express Base Specification.
MFC after: 2 weeks
local software base directory, as committed in SVN rev. 367813.
The pkg and mailwrapper programs used the LOCALBASE environment variable
for this purpose and this functionality is preserved by getlocalbase().
After this change, the value of the user.localbase sysctl variable is used
if present (and not overridden in the environment).
The nvmecontrol program gains support of a dynamic path to its plugin
directory with this update.
Differential Revision: https://reviews.freebsd.org/D27237
This fixes a type signedness comparison warning-to-error on
gcc-6.4. The ternary operation casts it right but the actual
assignment doesn't.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D26791
This constant depends on MAXPHYS and does not respect device capabilities.
Use proper dynamic ioctl(NVME_GET_MAX_XFER_SIZE) instead.
MFC after: 1 month
It seems *-passthru commands were broken from the day one, since the
device path is fetched into opt.dev variable and not left in argv[optind].
The other three wrong argv[optind] instances are just in error messages.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Literal references to /usr/local exist in a large number of files in
the FreeBSD base system. Many are in contributed software, in configuration
files, or in the documentation, but 19 uses have been identified in C
source files or headers outside the contrib and sys/contrib directories.
This commit makes it possible to set _PATH_LOCALBASE in paths.h to use
a different prefix for locally installed software.
In order to avoid changes to openssh source files, LOCALBASE is passed to
the build via Makefiles under src/secure. While _PATH_LOCALBASE could have
been used here, there is precedent in the construction of the path used to
a xauth program which depends on the LOCALBASE value passed on the compiler
command line to select a non-default directory.
This could be changed in a later commit to make the openssh build
consistently use _PATH_LOCALBASE. It is considered out-of-scope for this
commit.
Reviewed by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26942
Update the to log fetch operation for latest WDC NVMe products.
Tested on HGST SN100 (a few years old) and WDC SN720 (more recent).
Submitted by: Akhilesh Rn <Akhilesh.RN@wdc.com> (minor style tweak by me)
Github PR: 435
nvmecontrol tries to upload firmware in chunks as large as it thinks
the device permits. It fails to take into account the FWUG value used
by some drives to advertise the size and alignment limits for firmware
chunks.
- Use the firwmare update granularity value from the
- If the granularity is not reported or not restricted, fall back to
the previously existing logic that calculates the max transfer
size based on MDTS.
- Add firmware update granularity to the identify-controller output.
Reviewed by: imp (previous version), chuck
Obtained from: Dell EMC Isilon
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26390
o Be consistent about device-id and namespace-id
o Use consistent arg markup for these
o document you can use disk names too
o document nsid command better
o document the idenntify command
o add a couple of examples.
Differential Revision: https://reviews.freebsd.org/D24638
It makes tool more convenient to not require user to explicitly convert
namespace device name into controller device name. There should be no
changes to already existing syntaxes.
MFC after: 1 week
I recently made some bug fixes in nvmecontrol. It occurred to me that
since nvmecontrol lacks any kyua tests, I should convert the informal
testing I did into a more formal automated test. The test in this
change should be considered just a starting point; it is neither
complete nor thorough. While converting the test to ATF/kyua, I
discovered a small bug in nvmecontrol; the nvmecontrol devlist command
would always exit with an unsuccessful status. So I included the fix
for that, too, so that the test won't fail.
Reviewed by: imp@
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24269
This fixes several Coverity-detected errors in nvmecontrol. While in
here, a couple additional errors with shift/mask confusion that were
not diagnosed by Coverity are also fixed.
CIDs addressed: 1040299, 1040300, 1403972, 1403973, 1403985, 1403988,
1403990, 1404374, 1404427, 1404469, 1404510, 1404534, 1418118
CID 1403657 (resource leak of shared library handle) was marked
"intentional" in the Coverity scan database.
Reviewed by: vangyzen, robert.herndon_dell.com
Reviewed by: daniel.william.ryan_gmail.com (earlier version)
Reviewed by: rramsden_isilon.com (earlier version), imp
MFC after: 5 days
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24203
The kernel won't crash if you have a bad value and I'd rather not have
nvmecontrol know the internal details about how the nvme driver limits
the transfer size.
addition, the flags are optional, but were made to be mandatory. Set
these things, as well as santiy check the specified size.
Submitted by: Stefan Rink
PR: 240798
':'. It's slightly wasteful, but much easier (and the savings in bytes
at runtime would be tiny, but the code to do it larger).
Submitted by: Sebastian Huber
The Host Buffer feature (NVMe 1.4 section 89) allows for the NVMe card
request the host provide it buffer for lookaside tables and maybe
other things. Report the card's minimum and preferred sizes with
nvmecontrol/camcontrol identify.
I merged passthru.c from the wrong branch (it was a branch that went further in
a direction I wound up not taking). Fix the mismerge and turn passthru on.
NVMe reservations are quite alike to SCSI persistent reservations and
can be used in clustered setups with shared multiport storage.
MFC after: 10 days
Relnotes: yes
Sponsored by: iXsystems, Inc.
It allows to delete all user data from NVM subsystem in one of 3 methods.
It is a close equivalent of SCSI SANITIZE command of `camcontrol sanitize`,
so I tried to keep arguments as close as possible.
While there, fix supported sanitize methods reporting in `identify`.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
In particular: Changed Namespace List, Commands Supported and Effects,
Reservation Notification, Sanitize Status.
Add few new arguments to `nvmecontrol log` subcommand.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
While very useful by itself, it also makes `nvmecontrol` not depend on
hardcoded device names parsing, that in its turn makes simple to take
nvdX (and potentially any other) device names as arguments.
Also added IOCTL bypass from nvdX to respective nvmeYnsZ makes them
interchangeable for management purposes.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This adds several previously missed but important subcommands to list
namespaces and controllers. It also fixes few previously added but
just found with real testing to be broken subcommands.
Also while there, add possibility to explicitly specify nsid for
`nvmecontrol identify` subcommand. It may be useful to specify nsids
not having own devices, for example 0xffffffff, or just newly created
ones.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
These are mostly compatible with Linux, with three exceptions.
1. We don't do metadata segment stuff. Our passthrough interface
doesn't cope. The code is there, but generates an error.
2. Linux lets you specify a namespace ID for the command. We current
do not: we get ours from the namespace device, or pass in a generic
one. Generally, this will lead to the same command, but FreeBSD's
is safer since you can't specify the wrong id.
3. --show-command outputs to stderr instead of stdout so you can both
see your command, and capture its output with a simple redirect.
Differential Revision: https://reviews.freebsd.org/D19296
