When lockd is configured with a debug level of > 0 and foreground == 0,
the process is daemonized with a truth noclose argument to daemon().
This doesn't seem to be the desired behavior because that prevents
stdout and stderr from being closed, however, stdout and stderr aren't
used anywhere else. Furthermore, the man pages state that with a higher
debug level it will use the syslog facilities to do so.
Submitted by: Caleb St. John
Discussed with: rmacklem
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D29415
foreground.
This allows a separate process to monitor when and how those programs exit.
That process can then restart them if needed.
Submitted by: Alex Burlyga
Reviewed by: bcr, imp
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D22474
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
Reuse create_service code instead of duplicating it in
lookup_addresses for kernel NLM.
As a (good) side effect this also fixed a few issues that were
already fixed in the former but never applied to the latter.
Reviewed by: kevlo
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D11259
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
After r319369, the RPC code validates caller supplied buffer length in
taddr2uaddr. When no -h is specified, the sizeof(ai_addr) is used,
which is always smaller than the required size and therefore uaddr
would be NULL, causing the kernel to copyin() from userland NULL
and fail with EFAULT.
Reviewed by: kevlo (via Telegram)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D11151
This is a trivial simplification in the Makefile, meant to serve as
a good example for what to do with rules like this.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This will help ensure that the right error is trickled up when the
function is called if the lock status is NFS_RESERR
Differential Revision: https://reviews.freebsd.org/D6622
Reviewed by: rmacklem
Approved by: re (gjb)
Tested with: fsx; svn info/svnversion (uses bdb locking); locktests from Bull http://nfsv4.bullopensource.org/tools/tests/locktest.php
MFC after: 2 weeks
Reported by: Coverity
CID: 1008161, 1304956
Sponsored by: EMC / Isilon Storage Division
previous line to prevent buffer overflow. This turns out to not be
important because the upstream xdr code already capped the object
size at the proper value. Using the correct limit here looks a lot
less scary and should please Coverity.
Reported by: Coverity
CID: 1199309, 1199310
MFC after: 1 week
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
This is rather pedantic, as for most architectures it holds that
sizeof(type *) == sizeof(type **)
Found by: clang static analyzer
Reviewed by: ed
Differential Revision: https://reviews.freebsd.org/D4722
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
in the "hosts" array and eventually looks up the network address with
getaddrinfo(). At one point it checks for a numeric address and if it
sees one, it sets a hint parameter to force getaddrinfo to interpret the
host as a numeric address. However that hint is not cleared for subsequent
iterations of the loop and if any hosts seen after this point are host names,
getaddrinfo will fail on the name. The result of this bug is that you cannot
pass a host name to the -h flag.
Unfortunately, the first iteration will either process ::1 or 127.0.0.1,
so the flag is set on the first iteration and all host names will fail
to be processed.
The same bug applies to rpc.lockd and rpc.statd, so fix them too.
Differential Revision: https://reviews.freebsd.org/D1507
Reported by: Dylan Martin
MFC after: 1 week
Sponsored by: Sandvine Inc.
fail with "bind: address already in use". This problem was reported
to the freebsd-stable@ mailing list on Feb. 19 under the subject
heading "statd/lockd startup failure" by george+freebsd at m5p dot com.
The problem is that the first combination of {udp,tcp X ipv4,ipv6}
would select a port# dynamically, but one of the other three combinations
would have that port# already in use. The patch is somewhat involved
because it was requested by dougb@ that the four combinations use the
same port# wherever possible. The patch splits the create_service()
function into two functions. The first goes as far as bind(2) in a
loop for up to GETPORT_MAXTRY - 1 times, attempting to use the same port#
for all four cases. If these attempts fail, the last attempt allows
the 4 cases to use different port #s. After this function has succeeded,
the second function, called complete_service(), does the rest of what
create_service() did.
The three daemons mountd, rpc.lockd and rpc.statd all have a
create_service() function that is patched in a similar way. However,
create_service() has non-trivial differences for the three daemons
that made it impractical to share the same functions between them.
Reviewed by: jhb
MFC after: 2 weeks
- Provide function prototype for nlm_syscall
- Don't assign a variable from the stack to a global var[1]
- Remove unused vars
Found by: clang static analyser [1]
Reviewed by: dfr
provides the correct semantics for flock(2) style locks which are used by the
lockf(1) command line tool and the pidfile(3) library. It also implements
recovery from server restarts and ensures that dirty cache blocks are written
to the server before obtaining locks (allowing multiple clients to use file
locking to safely share data).
Sponsored by: Isilon Systems
PR: 94256
MFC after: 2 weeks
to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user can still
force the use of the old user NLM by building a kernel without NFSLOCKD
and/or removing the nfslockd.ko module.
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.
Highlights include:
* Thread-safe kernel RPC client - many threads can use the same RPC
client handle safely with replies being de-multiplexed at the socket
upcall (typically driven directly by the NIC interrupt) and handed
off to whichever thread matches the reply. For UDP sockets, many RPC
clients can share the same socket. This allows the use of a single
privileged UDP port number to talk to an arbitrary number of remote
hosts.
* Single-threaded kernel RPC server. Adding support for multi-threaded
server would be relatively straightforward and would follow
approximately the Solaris KPI. A single thread should be sufficient
for the NLM since it should rarely block in normal operation.
* Kernel mode NLM server supporting cancel requests and granted
callbacks. I've tested the NLM server reasonably extensively - it
passes both my own tests and the NFS Connectathon locking tests
running on Solaris, Mac OS X and Ubuntu Linux.
* Userland NLM client supported. While the NLM server doesn't have
support for the local NFS client's locking needs, it does have to
field async replies and granted callbacks from remote NLMs that the
local client has contacted. We relay these replies to the userland
rpc.lockd over a local domain RPC socket.
* Robust deadlock detection for the local lock manager. In particular
it will detect deadlocks caused by a lock request that covers more
than one blocking request. As required by the NLM protocol, all
deadlock detection happens synchronously - a user is guaranteed that
if a lock request isn't rejected immediately, the lock will
eventually be granted. The old system allowed for a 'deferred
deadlock' condition where a blocked lock request could wake up and
find that some other deadlock-causing lock owner had beaten them to
the lock.
* Since both local and remote locks are managed by the same kernel
locking code, local and remote processes can safely use file locks
for mutual exclusion. Local processes have no fairness advantage
compared to remote processes when contending to lock a region that
has just been unlocked - the local lock manager enforces a strict
first-come first-served model for both local and remote lockers.
Sponsored by: Isilon Systems
PR: 95247 107555 115524 116679
MFC after: 2 weeks
nfsd(8), in mountd(8), and in rpc.statd(8)
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.lockd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.lockd will automatically add 127.0.0.1 and
if IPv6 is enabled, ::1 to the list.
PR: bin/98500
MFC after: 1 week
