Commit Graph

2104 Commits

Author SHA1 Message Date
Kirk McKusick
68c49bcc40 Put in place the framework for consolodating contiguous blocks into
a smaller number of larger TRIM requests. The hope had been to have
the full TRIM consolodation in place for 12.0, but the algorithms
are still under development and need further testing. With this
framework in place it will be possible to easily add TRIM consolodation
once the optimal strategy has been found.

The only functional change with this patch is the elimination of TRIM
requests for blocks that are freed before they have been likely to
have been written.

Reviewed by: kib
Discussed with: Warner Losh and Chuck Silvers
Sponsored by: Netflix
2018-08-06 21:09:11 +00:00
Konstantin Belousov
61b285ac57 Avoid assertion in /dev/ufssuspend when the suspend ioctl is
(incorrectly) called while another suspension is already active.

PR:	230220
Reported by:	dexuan
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2018-08-01 19:06:55 +00:00
Alan Somers
6040822c4e Make timespecadd(3) and friends public
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.

Our kernel currently defines two-argument versions of timespecadd and
timespecsub.  NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions.  Solaris also defines a three-argument version, but
only in its kernel.  This revision changes our definition to match the
common three-argument version.

Bump _FreeBSD_version due to the breaking KPI change.

Discussed with:	cem, jilles, ian, bde
Differential Revision:	https://reviews.freebsd.org/D14725
2018-07-30 15:46:40 +00:00
Kirk McKusick
15430057b3 Add needed locking for um_flags added in -r335808.
While here document required locking details in ufsmount structure.

Reported by: kib
Reviewed by: kib
2018-07-17 04:43:58 +00:00
Conrad Meyer
9c9c01e43b ffs_syncvnode: Remove unhelpful print
It can occur during ordinary use of softupdates, or perhaps if writes to the
underlying media fail (causing bufs to be redirtied).  Either way, it is not
particularly actionable.

Reviewed by:	imp, kib
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D16258
2018-07-14 15:45:11 +00:00
Kirk McKusick
e1c27cf7d6 Import commit from NetBSD with checkin message:
Avoid Undefined Behavior in ffs_clusteracct()

    Change the type of 'bit' variable from int to unsigned int and use unsigned
    values consistently.

    sys/ufs/ffs/ffs_subr.c:336:10, shift exponent -1 is negative

    Detected with Kernel Undefined Behavior Sanitizer.

    Reported by <Harry Pantazis>

Submitted by: Pedro Giffuni
2018-07-07 19:11:43 +00:00
Kirk McKusick
ab0bcb6032 Create um_flags in the ufsmount structure to hold flags for a UFS filesystem.
Convert integer structure flags to use um_flags:

	int	um_candelete;			/* devvp supports TRIM */
	int	um_writesuspended;		/* suspension in progress */

become:

#define UM_CANDELETE		0x00000001	/* devvp supports TRIM */
#define UM_WRITESUSPENDED	0x00000002	/* suspension in progress */

This is in preparation for adding other flags to indicate forcible
unmount in progress after a disk failure and possibly forcible
downgrade to read-only.

No functional change intended.

Sponsored by:	Netflix
2018-06-29 22:24:41 +00:00
Warner Losh
06753bd3f9 Use buf + strategy rather than bypassing geom_vfs layer
The reference counting that's done in the geom_vfs layer to prevent
delivery of requests to defunct devices only works if all requests go
through that layer. UFS was bypassing that layer for BIO_DELETE requests,
sending them to the geom_consumer directly with g_io_request. Allocate
a buf, fill it in, and call strategy on it instead.

Submitted by: Chuck Silvers
Reviewed by: scottl, imp, kirk
Sponsored by: Netflix
Differential: https://reviews.freebsd.org/D15456
2018-06-26 00:39:38 +00:00
Matt Macy
1ef3a74e6b ufs: remove cgbno variable where unused 2018-05-19 19:30:42 +00:00
Kirk McKusick
8ab507588b Fix warning found by Coverity.
CID 1009353:  Error handling issues  (CHECKED_RETURN)
2018-05-16 23:42:02 +00:00
Konstantin Belousov
2ebc882927 Detect and optimize reads from the hole on UFS.
- Create getblkx(9) variant of getblk(9) which can return error.
- Add GB_NOSPARSE flag for getblk()/getblkx() which requests that BMAP
  was performed before the buffer is created, and EJUSTRETURN returned
  in case the requested block does not exist.
- Make ffs_read() use GB_NOSPARSE to avoid instantiating buffer (and
  allocating the pages for it), copying from zero_region instead.

The end result is less page allocations and buffer recycling when a
hole is read, which is important for some benchmarks.

Requested and reviewed by:	jeff
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Differential revision:	https://reviews.freebsd.org/D14917
2018-05-13 09:47:28 +00:00
Kirk McKusick
f8ccf17383 Renumber soft-update types starting at 1 instead of 0 to avoid confusion
of zero'ed memory appearing to have a valid soft-update type.

Also correct some comments.

Reviewed by: kib
2018-04-05 00:32:01 +00:00
Ed Maste
d8ba45e213 Revert r313780 (UFS_ prefix) 2018-03-17 12:59:55 +00:00
Ed Maste
1e2b9afca9 Prefix UFS symbols with UFS_ to reduce namespace pollution
Followup to r313780.  Also prefix ext2's and nandfs's versions with
EXT2_ and NANDFS_.

Reported by:	kib
Reviewed by:	kib, mckusick
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D9623
2018-03-17 01:48:27 +00:00
Kirk McKusick
efbf396426 This change is some refactoring of Mark Johnston's changes in r329375
to fix the memory leak that I introduced in r328426. Instead of
trying to clear up the possible memory leak in all the clients, I
ensure that it gets cleaned up in the source (e.g., ffs_sbget ensures
that memory is always freed if it returns an error).

The original change in r328426 was a bit sparse in its description.
So I am expanding on its description here (thanks cem@ and rgrimes@
for your encouragement for my longer commit messages).

In preparation for adding check hashing to superblocks, r328426 is
a refactoring of the code to get the reading/writing of the superblock
into one place. Unlike the cylinder group reading/writing which
ends up in two places (ffs_getcg/ffs_geom_strategy in the kernel
and cgget/cgput in libufs), I have the core superblock functions
just in the kernel (ffs_sbfetch/ffs_sbput in ffs_subr.c which is
already imported into utilities like fsck_ffs as well as libufs to
implement sbget/sbput). The ffs_sbfetch and ffs_sbput functions
take a function pointer to do the actual I/O for which there are
four variants:

    ffs_use_bread / ffs_use_bwrite for the in-kernel filesystem

    g_use_g_read_data / g_use_g_write_data for kernel geom clients

    ufs_use_sa_read for the standalone code (stand/libsa/ufs.c
	but not stand/libsa/ufsread.c which is size constrained)

    use_pread / use_pwrite for libufs

Uses of these interfaces are in the UFS filesystem, geoms journal &
label, libsa changes, and libufs. They also permeate out into the
filesystem utilities fsck_ffs, newfs, growfs, clri, dump, quotacheck,
fsirand, fstyp, and quot. Some of these utilities should probably be
converted to directly use libufs (like dumpfs was for example), but
there does not seem to be much win in doing so.

Tested by: Peter Holm (pho@)
2018-03-02 04:34:53 +00:00
Conrad Meyer
d4e6557bae ffs: softdep_disk_write_complete: Quiesce spurious Coverity warning
Coverity cannot determine that handle_written_indirdep() does not access
uninitialized 'sbp' when flags argument is zero.

So, simply move the initialization slightly sooner to silence the warning.

No functional change.

Reported by:	Coverity
Sponsored by:	Dell EMC Isilon
2018-03-01 00:29:52 +00:00
Kirk McKusick
528833fae1 Use a more straight-forward approach to relaxing the location
restraints when validating one of the backup superblocks.
2018-02-26 00:34:56 +00:00
Kirk McKusick
4cbd996a84 Relax the location restraints when validating one of the
backup superblocks.
2018-02-24 03:33:46 +00:00
Kirk McKusick
f686b1710a Refactor fix in r329600 to do its check once in readsuper() rather
than in the two places that call readsuper().

No semantic change intended.

Reviewed by: kib
2018-02-21 19:56:19 +00:00
Konstantin Belousov
9f74642385 Do not free(9) uninitialized pointer.
Reported and tested by:	allanjude
Reviewed by:	markj
Sponsored by:	The FreeBSD Foundation
2018-02-19 19:08:25 +00:00
Mark Johnston
16759360d4 Fix a memory leak introduced in r328426.
ffs_sbget() may return a superblock buffer even if it fails, so the
caller must be prepared to free it in this case. Moreover, when tasting
alternate superblock locations in a loop, ffs_sbget()'s readfunc
callback must free the previously allocated buffer.

Reported and tested by:	pho
Reviewed by:		kib (previous version)
Differential Revision:	https://reviews.freebsd.org/D14390
2018-02-16 15:41:03 +00:00
Kirk McKusick
068beacf21 The goal of this change is to prevent accidental foot shooting by
folks running filesystems created on check-hash enabled kernels
(which I will call "new") on a non-check-hash enabled kernels (which
I will call "old). The idea here is to detect when a filesystem is
run on an old kernel and flag the filesystem so that when it gets
moved back to a new kernel, it will not start getting a slew of
check-hash errors.

Back when the UFS version 2 filesystem was created, it added a file
flag FS_INDEXDIRS that was to be set on any filesystem that kept
some sort of on-disk indexing for directories. The idea was precisely
to solve the issue we have today. Specifically that a newer kernel
that supported indexing would be able to tell that the filesystem
had been run on an older non-indexing kernel and that the indexes
should not be used until they had been rebuilt. Since we have never
implemented on-disk directory indicies, the FS_INDEXDIRS flag is
cleared every time any UFS version 2 filesystem ever created is
mounted for writing.

This commit repurposes the FS_INDEXDIRS flag as the FS_METACKHASH
flag. Thus, the FS_METACKHASH is definitively known to have always
been cleared. The FS_INDEXDIRS flag has been moved to a new block
of flags that will always be cleared starting with this commit
(until they get used to implement some future feature which needs
to detect that the filesystem was mounted on a kernel that predates
the new feature).

If a filesystem with check-hashes enabled is mounted on an old
kernel the FS_METACKHASH flag is cleared. When that filesystem is
mounted on a new kernel it will see that the FS_METACKHASH has been
cleared and clears all of the fs_metackhash flags. To get them
re-enabled the user must run fsck (in interactive mode without the
-y flag) which will ask for each supported check hash whether it
should be rebuilt and enabled. When fsck is run in its default preen
mode, it will just ignore the check hashes so they will remain
disabled.

The kernel has always disabled any check hash functions that it
does not support, so as more types of check hashes are added, we
will get a non-surprising result. Specifically if filesystems get
moved to kernels supporting fewer of the check hashes, those that
are not supported will be disabled. If the filesystem is moved back
to a kernel with more of the check-hashes available and fsck is run
interactively to rebuild them, then their checking will resume.
Otherwise just the smaller subset will be checked.

A side effect of this commit is that filesystems running with
cylinder-group check hashes will stop having them checked until
fsck is run to re-enable them (since none of them currently have
the FS_METACKHASH flag set). So, if you want check hashes enabled
on your filesystems after booting a kernel with these changes, you
need to run fsck to enable them. Any newly created filesystems will
have check hashes enabled. If in doubt as to whether you have check
hashes emabled, run dumpfs and look at the list of enabled flags
at the end of the superblock details.
2018-02-08 23:06:58 +00:00
Pedro F. Giffuni
7cbd6d338e {ext2|ufs}_readdir: Avoid setting negative ncookies.
ncookies cannot be negative or the allocator will fail. This should only
happen if a caller is very broken but we can still try to survive the
event.

We should probably also verify for uio_resid > MAXPHYS but in that case
it is not clear that just clipping the ncookies value is an adequate
response.

MFC after:	2 weeks
2018-02-06 22:38:19 +00:00
Kirk McKusick
47806d1b93 Occasional cylinder-group check-hash errors were being reported on
systems running with a heavy filesystem load. Tracking down this
bug was elusive because there were actually two problems. Sometimes
the in-memory check hash was wrong and sometimes the check hash
computed when doing the read was wrong. The occurrence of either
error caused a check-hash mismatch to be reported.

The first error was that the check hash in the in-memory cylinder
group was incorrect. This error was caused by the following
sequence of events:

- We read a cylinder-group buffer and the check hash is valid.
- We update its cg_time and cg_old_time which makes the in-memory
  check-hash value invalid but we do not mark the cylinder group dirty.
- We do not make any other changes to the cylinder group, so we
  never mark it dirty, thus do not write it out, and hence never
  update the incorrect check hash for the in-memory buffer.
- Later, the buffer gets freed, but the page with the old incorrect
  check hash is still in the VM cache.
- Later, we read the cylinder group again, and the first page with
  the old check hash is still in the VM cache, but some other pages
  are not, so we have to do a read.
- The read does not actually get the first page from disk, but rather
  from the VM cache, resulting in the old check hash in the buffer.
- The value computed after doing the read does not match causing the
  error to be printed.

The fix for this problem is to only set cg_time and cg_old_time as
the cylinder group is being written to disk. This keeps the in-memory
check-hash valid unless the cylinder group has had other modifications
which will require it to be written with a new check hash calculated.
It also requires that the check hash be recalculated in the in-memory
cylinder group when it is marked clean after doing a background write.

The second problem was that the check hash computed at the end of the
read was incorrect because the calculation of the check hash on
completion of the read was being done too soon.

- When a read completes we had the following sequence:

  - bufdone()
  -- b_ckhashcalc (calculates check hash)
  -- bufdone_finish()
  --- vfs_vmio_iodone() (replaces bogus pages with the cached ones)

- When we are reading a buffer where one or more pages are already
  in memory (but not all pages, or we wouldn't be doing the read),
  the I/O is done with bogus_page mapped in for the pages that exist
  in the VM cache. This mapping is done to avoid corrupting the
  cached pages if there is any I/O overrun. The vfs_vmio_iodone()
  function is responsible for replacing the bogus_page(s) with the
  cached ones. But we were calculating the check hash before the
  bogus_page(s) were replaced. Hence, when we were calculating the
  check hash, we were partly reading from bogus_page, which means
  we calculated a bad check hash (e.g., because multiple pages have
  been mapped to bogus_page, so its contents are indeterminate).

The second fix is to move the check-hash calculation from bufdone()
to bufdone_finish() after the call to vfs_vmio_iodone() so that it
computes the check hash over the correct set of pages.

With these two changes, the occasional cylinder-group check-hash
errors are gone.

Submitted by: David Pfitzner <dpfitzner@netflix.com>
Reviewed by: kib
Tested by: David Pfitzner
2018-02-06 00:19:46 +00:00
Kirk McKusick
0d37a428f0 When reading a cylinder group, break out reporting of check hash errors
from other types of errors so that the error is correctly reported.
2018-01-31 23:13:37 +00:00
Pedro F. Giffuni
040fb18b60 Revert r328479:
{ext2|ufs}_readdir: Set limit on valid ncookies values.

We aren't allowed to set resid like this.

Pointed out by:	kib, imp
2018-01-27 16:34:00 +00:00
Pedro F. Giffuni
ee233ab975 {ext2|ufs}_readdir: Set limit on valid ncookies values.
Sanitize the values that will be assigned to ncookies so that we ensure
they are sane and we can handle them.

Let ncookies signed as it was before r328346. The valid range is such
that unsigned values are not required and we are not able to avoid at
least one cast anyways.

Hinted by:	bde
2018-01-27 15:33:52 +00:00
Kirk McKusick
dffce2150e Refactoring of reading and writing of the UFS/FFS superblock.
Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() and sbput() functions which then used in the various
filesystem utilities. This work is in preparation for adding
subperblock check hashes.

No functional change intended.

Reviewed by: kib
2018-01-26 00:58:32 +00:00
Pedro F. Giffuni
a94a2945be ext2fs|ufs:Unsign some values related to allocation.
When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.

MFC after:	2 weeks
2018-01-24 17:58:48 +00:00
Pedro F. Giffuni
f9834d101a Revert r327781, r328093, r328056:
ufs|ext2fs: Revert uses of mallocarray(9).

These aren't really useful: drop them.
Variable unsigning will be brought again later.
2018-01-24 16:44:57 +00:00
Pedro F. Giffuni
90b618f35b ufs: use mallocarray(9).
Basic use of mallocarray to prevent overflows: static analyzers are also
likely to perform additional checks.

Since mallocarray expects unsigned parameters, unsign some
related variables to minimize sign conversions.

Reviewed by:	mckusick
2018-01-17 18:18:33 +00:00
Konstantin Belousov
147b0c1a3e Softlink inodes can own buffers with dependencies.
At least, softlinks longer than 120 bytes have data fragments.

Submitted by:	mckusick
MFC after:	5 days
2018-01-11 13:37:45 +00:00
Pedro F. Giffuni
802258f46b Use mallocarray(9) in dirhash.
Basic use of mallocarray to prevent overflows. Here allocation is done
with M_NOWAIT so the code is prepared for the possibility of returning
NULL values. Since mallocarray expects unsigned parameters, unsign some
related variables to minimize sign conversions.

Reviewed by:	mckusick
2018-01-10 19:45:38 +00:00
Konstantin Belousov
c999b43527 Generalize the fix from r322757 and apply it to several more places.
The code accesses bp->b_dep without owning the ufs mount softdep lock,
which makes it possible for the derefenced workitem to be freed in
parallel.  In particular, the deallocate_dependencies(),
softdep_disk_io_initiation() and softdep_disk_write_complete() are
affected.

Move the code to safely calculate ump from the buffer with
dependencies into the helper softdep_bp_to_mp() and use it for all
found cases.

Tested by:	pho (as part of the bigger patch)
Reviewed by:	mckusick (as part of the bigger patch)
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2018-01-09 10:51:44 +00:00
Konstantin Belousov
e51e3c7e73 When handling write completion, take SU lock around calls to
handle_written_XXX() in case of processing the buffer with an error.

Tested by:	pho (as part of the bigger patch)
Reviewed by:	mckusick (as part of the bigger patch)
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2018-01-09 10:44:17 +00:00
Konstantin Belousov
377f88fb08 Postpone the disassotiation of the background write buffer with devvp
so that buf_complete() sees fully constructed buffer.

This is a NOP right now, but will be needed by the forthcoming SU change.

Reported and tested by:	pho
Reviewed by:	mckusick
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2018-01-09 10:33:11 +00:00
Mark Johnston
8a7a42bb17 Add missing newlines to a couple of error messages.
Keep error messages on a single line so that they're easier to grep for.

Reported by:	pho
MFC after:	1 week
2018-01-03 18:19:47 +00:00
Pedro F. Giffuni
51268c3852 SPDX: Complete License ID tags for UFS. 2017-12-27 19:13:50 +00:00
Eitan Adler
caa7e52f3f kernel: Fix several typos and minor errors
- duplicate words
- typos
- references to old versions of FreeBSD

Reviewed by:	imp, benno
2017-12-27 03:23:21 +00:00
Alexander Kabaev
151ba7933a Do pass removing some write-only variables from the kernel.
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
2017-12-25 04:48:39 +00:00
Alexander Kabaev
5f943cca65 Remove dead initialization of the inode pointer.
The pointer gets initialized again later in the code. This also
improves code style(9).
2017-12-23 16:24:02 +00:00
John Baldwin
b501cc5da6 Rework pathconf handling for FIFOs.
On the one hand, FIFOs should respect other variables not supported by
the fifofs vnode operation (such as _PC_NAME_MAX, _PC_LINK_MAX, etc.).
These values are fs-specific and must come from a fs-specific method.
On the other hand, filesystems that support FIFOs are required to
support _PC_PIPE_BUF on directory vnodes that can contain FIFOs.
Given this latter requirement, once the fs-specific VOP_PATHCONF
method supports _PC_PIPE_BUF for directories, it is also suitable for
FIFOs permitting a single VOP_PATHCONF method to be used for both
FIFOs and non-FIFOs.

To that end, retire all of the FIFO-specific pathconf methods from
filesystems and change FIFO-specific vnode operation switches to use
the existing fs-specific VOP_PATHCONF method.  For fifofs, set it's
VOP_PATHCONF to VOP_PANIC since it should no longer be used.

While here, move _PC_PIPE_BUF handling out of vop_stdpathconf() so that
only filesystems supporting FIFOs will report a value.  In addition,
only report a valid _PC_PIPE_BUF for directories and FIFOs.

Discussed with:	bde
Reviewed by:	kib (part of a larger patch)
MFC after:	1 month
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D12572
2017-12-19 22:39:05 +00:00
John Baldwin
599afe53a8 Move NAME_MAX, LINK_MAX, and CHOWN_RESTRICTED out of vop_stdpathconf().
Having all filesystems fall through to default values isn't always correct
and these values can vary for different filesystem implementations.  Most
of these changes just use the existing default values with a few exceptions:
- Don't report CHOWN_RESTRICTED for ZFS since it doesn't do the exact
  permissions check this claims for chown().
- Use NANDFS_NAME_LEN for NAME_MAX for nandfs.
- Don't report a LINK_MAX of 0 on smbfs.  Now fail with EINVAL to
  indicate hard links aren't supported.

Requested by:	bde (though perhaps not this exact implementation)
Reviewed by:	kib (earlier version)
MFC after:	1 month
Sponsored by:	Chelsio Communications
2017-12-19 19:51:36 +00:00
Mark Johnston
b6fbf003e1 Provide a sysctl to force synchronous initialization of inode blocks.
FFS performs asynchronous inode initialization, using a barrier write
to ensure that the inode block is written before the corresponding
cylinder group header update. Some GEOMs do not appear to handle
BIO_ORDERED correctly, meaning that the barrier write may not work as
intended. The sysctl allows one to work around this problem at the
cost of expensive file creation on new filesystems. The default
behaviour is unchanged.

Reviewed by:	kib, mckusick
MFC after:	1 weeks
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D13428
2017-12-09 15:44:30 +00:00
Konstantin Belousov
b6721e4a5c Fix livelock in ufsdirhash_create().
When more than one thread enters ufsdirhash_create() for the same
directory and the inode dirhash is instantiated, but the dirhash' hash
is not, all of them lock the dirhash shared and then try to upgrade.
Since there are several threads owning the lock shared, upgrade fails
and the same attempt is repeated, ad infinitum.

To break the lockstep, lock the dirhash in exclusive mode after the
failed try-upgrade.

Reported and tested by:	pho
Sponsored by:	Mellanox Technologies
MFC after:	1 week
2017-12-07 09:05:34 +00:00
Pedro F. Giffuni
fe267a5590 sys: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:23:17 +00:00
Pedro F. Giffuni
51369649b0 sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00
Konstantin Belousov
4e13cca54e Improve the message printed when the cylinder group checksum is wrong.
Mention the device path and mount point path, handle snapshots.

Tested by:	imp
Sponsored by:	The FreeBSD Foundation
2017-11-05 13:28:48 +00:00
Mark Johnston
4770655901 Remove a stale and incorrect comment.
MFC after:	1 week
Sponsored by:	Dell EMC Isilon
2017-10-28 02:51:27 +00:00
Mark Johnston
9cf7abcc1d Remove workqueue items after updating the workqueue tail pointer.
When QUEUE_MACRO_DEBUG_TRASH is configured, the queue linkage fields
are trashed upon removal of the item, so be sure to only read them before
removing the item.

No functional change intended.

MFC after:	1 week
Sponsored by:	Dell EMC Isilon
2017-10-28 02:48:37 +00:00