Bill Fumerola
4ca3536e6c
BDECFLAGS (with a whitespace change or two)
2000-08-29 03:25:49 +00:00
Greg Lehey
5ef18a82df
Correct typo.
2000-08-29 02:42:02 +00:00
MIHIRA Sanpei Yoshiro
961f1cbb8c
set pccard insertion beep type in install floppy.
...
When we use PC-Card as install media, it is a patch
to tell with beep about whether we were able to
recognize it well.
Reviewed by: jkh, imp
Tested by: Kenji Yamada <kyamada@ISI.EDU>
2000-08-29 00:42:31 +00:00
Brian Somers
06a43ce058
Add LogFILTER logging to log packets allowed by the dial filter and
...
dropped by any filter.
Submitted by: Mark Hannon <markhannon@one.net.au>
with some small tweaks by me.
2000-08-28 23:24:52 +00:00
John Baldwin
08945429b9
Revert back to the previous i-node values for the fixit floppy.
2000-08-28 23:16:14 +00:00
John Baldwin
02e07fcda7
- Break the acd track devices out into a seperate target acdXt[Y]. The
...
X field is treated the same as the unit number for acdX. The optional
Y parameter specifies the number of track devices to create starting at
track 1. If Y is not specified, it defaults to 100.
- Add the acd0t target to the all target to preserve previous behavior.
- Don't add the acd0t target to the fixit target, thus keeping the fixit
floppy from running out of i-nodes.
2000-08-28 23:14:44 +00:00
Brian Somers
794c9bbc80
Support radius accounting, and add a packet count to throughput
...
statistics as a side effect.
Submitted by: Marcin Cieslak <saper@system.pl>
with some tweaks to RAD_ACCT_SESSION_ID and
RAD_ACCT_MULTI_SESSION_ID generation by me.
2000-08-28 22:44:54 +00:00
Peter Wemm
8750ed5f77
After positive feedback from a few folks, activate a switchover to
...
using killall.c instead of the perl version that depends on procfs.
The C version uses sysctl(). The program is based on a hack that was
originally written about 6 years ago and has evolved somewhat since then.
(which is why it is a superset of killall.pl, rather than being a clone.)
With apologies to: wosch
2000-08-28 22:09:38 +00:00
Doug Rabson
21c3015a24
* Completely rewrite the alpha busspace to hide the implementation from
...
the drivers.
* Remove legacy inx/outx support from chipset and replace with macros
which call busspace.
* Rework pci config accesses to route through the pcib device instead of
calling a MD function directly.
With these changes it is possible to cleanly support machines which have
more than one independantly numbered PCI busses. As a bonus, the new
busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
Bill Paul
5809aaba67
Update xl(4) man page to mention a whole bunch of supported cards,
...
including the 3c556 and 3c556B.
2000-08-28 21:25:37 +00:00
Doug Rabson
21c58b8d40
Document kobj_class_compile_static().
2000-08-28 21:17:46 +00:00
Doug Rabson
f80e454726
Add kobj_class_compile_static() to allow classes to be initialised
...
statically (i.e. without calling malloc). This allows kobj to be used
very early in the boot sequence.
2000-08-28 21:11:12 +00:00
Doug Rabson
a4f9b116e3
* Remove a bogus call to kobj_init() from make_device().
...
* Add a non-empty implementation of root_print_child().
2000-08-28 21:08:12 +00:00
Doug Rabson
e6171135a7
Fix disordered arguments to bus_space_barrier().
2000-08-28 21:02:18 +00:00
Bill Paul
4e2499823f
Add support for the 3Com 556 and 556B mini-pci adapters used on some
...
laptops. I've checked that this still works with the other cards and
it works with the 3c556 that I have access to, but I want to check that
it works with the 556B mentioned in PR #20878 before I close out the PR
and merge to -stable.
2000-08-28 20:40:03 +00:00
Satoshi Asami
b7823d1fde
Add BSD.x11-4.dist to list of mtree files to install (d'oh!).
...
Submitted by: Nathan Ahlstrom <nrahlstr@winternet.com>
2000-08-28 20:22:25 +00:00
Murray Stokely
9cd58f8533
This allows you to script sysinstall to say "NO" to DHCP and IPv6.
...
Previously, you could only script these features if you said YES.
Oops. Accidentally commited to releng_4 first.
PR: 20334
Approved by: jkh
2000-08-28 18:18:47 +00:00
David Malone
ad8c1e6a09
According to the susv2 man pages I have, remove(3) should act as
...
rmdir(2) on directories and unlink(2) otherwise. This modification,
and most of the man page update has been obtined from OpenBSD. This
was spotted by someone on a mailing lists a few months ago, but
I've lost their mail.
Reviewed by: sheldonh
2000-08-28 15:45:42 +00:00
Andrey A. Chernov
05efdfbfab
8859-8 fonts
...
PR: 20864
Submitted by: Allow Ole <allow@darkserver.dyndns.org>
2000-08-28 15:07:58 +00:00
John Hay
b102f2e18e
The fixit floppy needs a few more inodes.
2000-08-28 14:25:53 +00:00
MIHIRA Sanpei Yoshiro
6a8fb6a382
add ELECOM Air@Hark/LD-WL11/PCC card
...
add NEC Wireless Card CMZ-RT-WP card
Obtained from: [bsd-nomads:13988] by YAMAMOTO Shigeru <shigeru@iij.ad.jp>
sort Farallon Skyline 11Mbps Wireless entory
2000-08-28 14:15:24 +00:00
Nick Hibma
05c17c3208
No more hunting around for ipnat.conf(5) man page.
2000-08-28 11:36:30 +00:00
Sheldon Hearn
b24e6a5a39
Whitespace-only change: fix hard sentence breaks in previous commit.
2000-08-28 10:11:56 +00:00
Alexey Zelkin
b166438d50
Apply fixes from NetBSD to bring this manual page into reallity.
...
Inspired by: ru & 4.4BSD Design and Implementation
Obtained from: NetBSD
2000-08-28 09:27:28 +00:00
Sheldon Hearn
e4bc2e3400
Explain the notion that additional mount options may be described
...
in mount_XXX manual pages. Remove explicit mention of NFS mount
options, since they are accurately described by this rule.
PR: 20814
2000-08-28 08:52:59 +00:00
Hajimu UMEMOTO
222e221abc
make sure we have IV that is random enough. memory allocator on
...
some of platforms give us almost constant number (oops).
Obtained from: KAME
2000-08-28 08:24:46 +00:00
Marcel Moolenaar
3f4ab6537f
Regen: fix prototypes for {o|}{g|s}etrlimit.
2000-08-28 07:56:38 +00:00
Sheldon Hearn
228bfb17f2
(forced commit)
...
rev 1.21 was:
PR: 20706
Reported by: Damieon Stark <visigoth@telemere.net>
Submitted by: Jonathan Chen <jon@spock.org>
2000-08-28 07:54:27 +00:00
Marcel Moolenaar
ae51d56ce1
Fix prototypes for {o|}{g|s}etrlimit. A recent change in the
...
Linuxulator caused this bug to trigger.
2000-08-28 07:50:44 +00:00
Bill Fumerola
a272dc48fc
Clean up previous commit.
2000-08-28 05:54:14 +00:00
Greg Lehey
b23507f424
Add the description of some hard-learnt restrictions and a workaround.
2000-08-28 05:47:05 +00:00
Warner Losh
5f2686b793
Define a pcic module version
2000-08-28 04:53:36 +00:00
Coleman Kane
a436a79744
Removed detection for Voodoo Banshee and Voodoo3 cards. I forsee certain
...
possible complications with the forthcoming DRI code, and feel that DRI
should handle the device-level interaction. Read
http://people.FreeBSD.org/~cokane/3dfx.html
to find out more. Basically want to move toward using OpenGL and DRI for
everything on these cards. Added a few defines and spacing style fixes in
tdfx_vars.h
2000-08-28 04:28:53 +00:00
Warner Losh
fdb9f54dde
/boot/device.hints is now required.
2000-08-28 03:54:51 +00:00
Marcel Moolenaar
05c313d4ec
Don't enable Linuxulator support if not on an i386.
...
PR: 20873
Submitted by: Christian Weisgerber <naddy@mips.inka.de>
2000-08-28 03:17:49 +00:00
Matt Jacob
84267b9edd
remove clause 3 licence
2000-08-27 23:39:23 +00:00
Matt Jacob
b6b6ad2f23
various fixes
2000-08-27 23:38:44 +00:00
Bill Fumerola
3aa9aaf931
BDECFLAGS
2000-08-27 22:24:43 +00:00
Bill Fumerola
4dd97a3440
Add 'shot', using the definition used by bars and shotglasses.
2000-08-27 22:02:42 +00:00
Matt Jacob
170fecb13c
*fix* commented out DEVFS
2000-08-27 21:57:31 +00:00
Matt Jacob
8669ad2fe3
add commented out DEVFS
2000-08-27 21:56:40 +00:00
John W. De Boskey
0d4ea86b6e
Remove a stray backspace character.
...
Reviewed by: Eivind Eklund <eivind@FreeBSD.org>
2000-08-27 18:49:12 +00:00
Gregory Neil Shapiro
d1460f64f4
sendmail 8.11.0 has been merged into RELENG_4
2000-08-27 17:33:46 +00:00
Poul-Henning Kamp
c32d0a1dcd
Reorder vop's alphabetically.
...
Smarter use of devfs_allocv() (from bp@)
Introduce devfs_find()
".." fixes to devfs_lookup (from bp@)
2000-08-27 14:46:36 +00:00
Poul-Henning Kamp
62ddc84e08
Call destroy_dev() when sio devices go away.
2000-08-27 14:46:13 +00:00
Kazutaka YOKOTA
201e598bbc
Fix ioctl MOUSE_SETMODE as defined in mouse(4).
...
(Do not return EINVAL when -1 is specified as a new value,
as it should mean "preserve the current value.")
2000-08-27 12:36:28 +00:00
Peter Wemm
e1669132dc
Try and fix up some bogus indentation leftovers from emacs several
...
years ago.
2000-08-27 02:12:29 +00:00
Peter Wemm
a03884671d
Sigh, today is not my day. Convert a verbose while() .. loop into a for()
...
loop.
Submitted by: billf
2000-08-27 01:17:11 +00:00
Peter Wemm
a6b474b6c1
*blush*. I was *sure* I compiled this after the last change..
...
Add the missing )
Shamed by: billf
2000-08-27 01:10:55 +00:00
Jun-ichiro itojun Hagino
06f879c7f2
warn that setsockopt/sysctl # spaces are shared among *BSD, and should better
...
be consulted with KAME guys if you want a number.
2000-08-27 00:58:13 +00:00