instead of MK_KERBEROS. The reason for this change is some users
prefer to build FreeBSD WITHOUT_KERBEROS, wanting to retain the
Kerberos rc scripts to start/stop MIT Kerberos or Heimdal from ports.
PR: 197337
Reported by: Adam McDougall <ebay at looksharp.net>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24252
We used to have a problem where bridges created in different vnet jails
would end up having the same mac address. This is now fixed by
including the jail name as a seed for the mac address generation, but we
should verify that it doesn't regress.
Both DIOCCHANGEADDR and DIOCADDADDR take a struct pf_pooladdr from
userspace. They failed to validate the dyn pointer contained in its
struct pf_addr_wrap member structure.
This triggered assertion failures under fuzz testing in
pfi_dynaddr_setup(). Happily the dyn variable was overruled there, but
we should verify that it's set to NULL anyway.
Reported-by: syzbot+93e93150bc29f9b4b85f@syzkaller.appspotmail.com
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24431
ifa_grouplookup() uses the data loaded in ifa_load() (through is_a_group()), so
we must call ifa_load() before we can rely on any of the data it populates.
Submitted by: Nick Rogers
MFC after: 1 week
Sponsored by: RG Nets
This is continuation of D21163/r359634, which handled the alignment
for global mode.
Non-x86 arches are not handled, maintainers are welcomed.
Tested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D24366
According to the upstream man page (which we don't install), none of
libauditd's symbols are intended to be public. Also, I can't find any
evidence for a port that uses libauditd. Therefore, we should treat it like
other such libraries and use PRIVATELIB.
Reported by: phk
Reviewed by: cem, emaste
MFC after: 2 weeks
pmap_bootstrap() expects the kernel's physical load address, but we have
been providing the start of physical memory. This had the nice effect of
protecting the memory used by the SBI runtime firmware, but now that we
have alternate means of achieving that, we should provide the correct
value. This will free up any memory between the SBI firmware and the
kernel for allocation.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D24156
The device tree may contain a "reserved-memory" node, whose purpose is
to communicate sections of physical memory that should not be used for
general allocations. Add the logic to parse and exclude these regions.
The particular motivation for this is protection of the SBI runtime
firmware. Currently, there is no mechanism through which the SBI
can communicate the details of its reserved memory region(s) to
a supervisor payload. There has been some discussion recently on how
this can be achieved [1], and it seems that the path going forward
will be to add an entry to the reserved-memory node.
This hasn't caused any issues for us yet, since we exclude all physical
memory below the kernel's load address from being allocated, and on all
currently supported platforms this covers the SBI firmware region. This
will change in another commit, so as a safety measure, ensure that the
lowest 2MB of memory is excluded if this region has not been reported.
[1] https://github.com/riscv/riscv-sbi-doc/pull/37
Reviewed by: markj, nick (older version)
Differential Revision: https://reviews.freebsd.org/D24155
Replace our hand-rolled functions with the generic ones provided by
kern/subr_physmem.c. This greatly simplifies the initialization of
physical memory regions and kernel globals.
Tested by: nick
Differential Revision: https://reviews.freebsd.org/D24154
The arm_physmem interface found in arm's MD code provides a convenient
set of routines for adding/excluding physical memory regions and
initializing important kernel globals such as Maxmem, realmem,
phys_avail[], and dump_avail[]. It is especially convenient for FDT
systems, since we can use FDT parsing functions and pass the result
directly to one of these physmem routines. This interface is already in
use on arm and arm64, and can be used to simplify this early
initialization on RISC-V as well.
This requires only a couple trivial changes:
- Move arm_physmem_kernel_addr to arm/machdep.c. It is unused on arm64,
and manipulated entirely in arm MD code.
- Convert arm32_btop/arm64_btop to atop. This is equivalently defined
on all architectures.
- Drop the "arm" prefix.
Reviewed by: manu, emaste ("looks reasonable")
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24153
don't implement link power management, LPM.
This fixes error code XHCI_TRB_ERROR_BANDWIDTH for isochronous USB 3.0
transactions.
Submitted by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
The list of possible features in hccontrol/features2str() is incomplete.
Refer to "Bluetooth Core Specification 5.2 Vol. 2 Part C. 3.3 Feature Mask Definition".
Submitted by: Marc Veldman <marc@bumblingdork.com>
PR: 245354
MFC after: 1 week
Sponsored by: Mellanox Technologies
Unconditionally use ether_gen_addr() to generate bridge mac addresses. This
function is now less likely to generate duplicate mac addresses across jails.
The old hand rolled hostid based code adds no value.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D24432
If we create two (vnet) jails and create a bridge interface in each we end up
with the same mac address on both bridge interfaces.
These very often conflicts, resulting in same mac address in both jails.
Mitigate this problem by including the jail name in the mac address.
Reviewed by: kevans, melifaro
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24383
It must contain fully restored contigous run of the wired pages from
the object, except possible trimmed tail.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
It is true for zfs, but it is not for e.g. vnode or buffer pagers.
When fixing bogus pages, fix them in both places. Rely on the fact
that pa[0] must have been invalid so it cannot be bogus.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
LLVM-9.0 clang++ throws an error for enum defined within
an anonymous struct.
Reviewed by: jtl, rpokala
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org//D24477
The typedef mbuf_t was used for the Mac OS/X port of the code long ago.
Since this port is no longer used and the use of mbuf_t obscures what
the code does (and is not consistent with style(9)), it is no longer needed.
This patch replaces all instances of mbuf_t with "struct mbuf *", so that
it is no longer used.
This patch should not result in any semantic change.
Silence the "DWARF2 can only represent one section per compilation unit"
warning in amd64 GENERIC builds by disabling Clang's debuginfo generation for
this assembler file (-g0). The message is replaced by a warning from
ctfconvert that there is no debuginfo to convert (future work).
The file contains some metadata (several ELF notes) and some code. The code
does not appear to have anything that debuginfo would aid.
I looked at the generated debuginfo (readelf -w xen-locore.o) prior to this
change, and the metadata that would be disabled are things like associated
between binary offset and code line number (not especially useful with a
disassembler), and label metadata for the entry points (not especially useful
as this is already in the symbol table).
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D24384
snd_hda was rewritten in r230130; one function retained a comment
referencing the previous name.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
A later change, currently being iterated on in D24459, will in-fact change
the lock type to an sx so that TTY drivers can sleep on it if they need to.
Committing this ahead of time to make the review in question a little more
palatable.
tty_lock_assert() is unfortunately still needed for now in two places to
make sure that the tty lock has not been recursed upon, for those scenarios
where it's supplied by the TTY driver and possibly a mutex that is allowed
to recurse.
Suggested by: markj
The use of "int" here caused the compiler to believe that it needs to
insert a "sll $n, $n, 0" to sign extend as part of the implicit cast
to uint64_t.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: brooks, arichardson
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24457
