never get here, however a test for SOLARIS, as redundant as this test is,
serves to document that this is the illumos definition. This should help
those who come after me to follow the code more easily.
MFC after: 1 month
Remove #ifdefs for ancient and irrelevant operating systems from
ipfilter.
When ipfilter was written the UNIX and UNIX-like systems in use
were diverse and plentiful. IRIX, Tru64 (OSF/1) don't exist any
more. OpenBSD removed ipfilter shortly after the first time the
ipfilter license terms changed in the early 2000's. ipfilter on AIX,
HP/UX, and Linux never really caught on. Removal of code for operating
systems that ipfilter will never run on again will simplify the code
making it easier to fix bugs, complete partially implemented features,
and extend ipfilter.
Unsupported previous version FreeBSD code and some older NetBSD code
has also been removed.
What remains is supported FreeBSD, NetBSD, and illumos. FreeBSD and
NetBSD have collaborated exchanging patches, while illumos has expressed
willingness to have their ipfilter updated to 5.1.2, provided their
zone-specific updates to their ipfilter are merged (which are of interest
to FreeBSD to allow control of ipfilters in jails from the global zone).
Reviewed by: glebius@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19006
That should shorten 'ifconfig <wlan> list txparam' output since
unsupported modes will not be shown.
Checked with RTL8188EE, STA mode.
MFC after: 2 weeks
Do not try to clear 'basic rate' bit from roamRate; it cannot be here and,
actually, this operation clears 'MCS rate' bit instead, breaking comparison
for 11n / 11ac modes.
Tested with RTL8188CUS, HOSTAP mode + RTL8821AU, STA mode.
MFC after: 3 days
ifconfig(8) prints per-mode parameters if they are non-zero; since
we have 13 possible modes with 3...5 typically supported this change
should greatly reduce amount of information for 'ifconfig <wlan> list roam'
command.
While here ensure that sta_roam_check() will not use roaming parameters
for unsupported modes (it should not).
This change effectively reverts r188776.
MFC after: 2 weeks
Add SYNC_KLOOP_MODE option, and add support for direct mode, where application
executes the TXSYNC and RXSYNC in the context of the ioeventfd wake up callback.
MFC after: 5 days
When in MSI mode, the device was only being configured with one
interrupt index, but it needs two - one for the actual interrupt and
one to park the tx queue at.
Also clarified comments relating to interrupt index assignment.
Reported by: Yuri Pankov <yuripv@yuripv.net>
MFC after: 1 day
The XIVE (External Interrupt Virtualization Engine) is a new interrupt
controller present in IBM's POWER9 processor. It's a very powerful,
very complex device using queues and shared memory to improve interrupt
dispatch performance in a virtualized environment.
This yields a ~10% performance improvment over the XICS emulation mode,
measured in both buildworld, and 'dd' from nvme to /dev/null.
Currently, this only supports native access.
MFC after: 1 month
512GB of ZFS ABD ARC means abd_chunk zone of 128M 4KB items. To manage
them UMA tries to allocate 2GB hash table, which size does not fit into
the int variable, causing later allocation failure, which makes ARC shrink
back below the 512GB, not letting it to use more RAM. With this change I
easily reached >700GB ARC size on 768GB RAM machine.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
With the current 24G memory limit for GENERIC, the boot time test
causes quite visible delay, amplified by the default
debug.late_console = 0.
The comment text is copied from the same setting explanation for
amd64.
Suggested by: bde
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
CPU and buses can manage up to the limit reported by cpu_maxphyaddr,
so set mem_rman to the value returned by cpu_getmaxphyaddr(). For the
PAE mode, it was missed both when rman_res_t was increased to
uintmax_t, and from the PAE merge commit.
When importing smaps or dump_avail chunks into memory rman, do not
blindly ignore resources which ends above the limit, chomp them
instead if start is below the limit. The same change was already done
to i386 add_physmap_entry().
Based on the submission by: bde
MFC after: 2 months
"slow" interrupt handler:
- Expand the list of INT_CAUSE registers known to the driver.
- Add decode information for many more bits but decouple it from the
rest of intr_info so that it is entirely optional.
- Call t4_fatal_err exactly once, and from the top level PL intr handler.
t4_fatal_err:
- Use t4_shutdown_adapter from the common code to stop the adapter.
- Stop servicing slow interrupts after the first fatal one.
Driver/firmware interaction:
- CH_DUMP_MBOX: note whether the mailbox being dumped is a command or a
reply or something else.
- Log the raw value of pcie_fw for some errors.
- Use correct log levels (debug vs. error).
Sponsored by: Chelsio Communications
kbd(4) (but only documented in atkbd(4)) maintains a table of strings
for 96 function keys. Using teken broke this 9+ years ago for the
most usable first 12 function keys and for 10 cursor keys, by supplying
its own non-programmable strings so that the keyboard driver's strings
are not used.
Fix this by supplying NULL in the teken layer for syscons in cons25 mode
so that the the strings are found in the kbd(4) layer.
vt needs more changes to use kbd(4)'s tables. Teken's cons25 table is
still needed to supply nonempty strings for vt in cons25 mode.
Keep using teken's xterm tables for both syscons and vt in xterm mode.
Function keys should at least default to xterm values in xterm mode,
and kbd(4) doesn't support this.
teken_set_cons25() sets a sticky flag to ask for the fix, and space is
reserved for another new flag. vt should set this flag when it uses
kbd(4)'s tables.
PR: 226553 (for vt)
consistently.
This inconsistency was observed when working on the bug reported in
PR 235256, although it does not fix the reported issue. The fix for
the PR will be a separate commit.
PR: 235256
Reviewed by: rrs@, Richard Scheffenegger
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D19033
The KPI have been reviewed and cleansed of features that were planned
back 20 years ago and never implemented. The pfil(9) internals have
been made opaque to protocols with only returned types and function
declarations exposed. The KPI is made more strict, but at the same time
more extensible, as kernel uses same command structures that userland
ioctl uses.
In nutshell [KA]PI is about declaring filtering points, declaring
filters and linking and unlinking them together.
New [KA]PI makes it possible to reconfigure pfil(9) configuration:
change order of hooks, rehook filter from one filtering point to a
different one, disconnect a hook on output leaving it on input only,
prepend/append a filter to existing list of filters.
Now it possible for a single packet filter to provide multiple rulesets
that may be linked to different points. Think of per-interface ACLs in
Cisco or Juniper. None of existing packet filters yet support that,
however limited usage is already possible, e.g. default ruleset can
be moved to single interface, as soon as interface would pride their
filtering points.
Another future feature is possiblity to create pfil heads, that provide
not an mbuf pointer but just a memory pointer with length. That would
allow filtering at very early stages of a packet lifecycle, e.g. when
packet has just been received by a NIC and no mbuf was yet allocated.
Differential Revision: https://reviews.freebsd.org/D18951
Not all child devices of the NVDIMM root device represent DIMM devices
which are present in the system. The spec says (ACPI 6.2, sec 9.20.2):
For each NVDIMM present or intended to be supported by platform,
platform firmware also exposes an NVDIMM device ... under the
NVDIMM root device.
Present NVDIMM devices are found by walking all of the NFIT table's
SPA ranges, then walking the NVDIMM regions mentioned by those SPA
ranges.
A set of NFIT walking helper functions are introduced to avoid the
need to splat the enumeration logic across several disparate
callbacks.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18439
Move the enumeration of NVDIMM SPA ranges from the spa GEOM class
initializer into the NVDIMM root device. This will be necessary for a
later change where NVDIMM namespaces require NVDIMM device enumeration
to be reliably ordered before SPA enumeration.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18734
anything except several assertions. This type is going to be used for
temporary on stack mbufs, that point into data in receive ring of a NIC,
that shall not be freed. Such mbuf can not be stored or reallocated, its
life time is current context.
Parts of the kobj(9) KPI assume a non-sleepable context for the purpose
of internal memory allocations, but currently have no way to signal an
allocation failure to the caller, so they just panic in this case. This
can occur even when kobj_create() is called with M_WAITOK. Fix some
instances of the problem by plumbing wait flags from kobj_create() through
internal subroutines. Change kobj_class_compile() to assume a sleepable
context when called externally, since all existing callers use it in a
sleepable context.
To fix the problem fully the kobj_init() KPI must be changed.
Reported and tested by: pho
Reviewed by: kib (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19023
This patch and commit message are based on r340256 created by Jacob Keller:
The iflib stack does not disable TSO automatically when TXCSUM is
disabled, instead assuming that the driver will correctly handle TSOs
even when CSUM_IP is not set.
This results in iflib calling ixgbe_isc_txd_encap with packets which have
CSUM_IP_TSO, but do not have CSUM_IP or CSUM_IP_TCP set. Because of
this, ixgbe_tx_ctx_setup will not setup the IPv4 checksum offloading.
This results in bad TSO packets being sent if a user disables TXCSUM
without disabling TSO.
Fix this by updating the ixgbe_tx_ctx_setup function to check both
CSUM_IP and CSUM_IP_TSO when deciding whether to enable checksums.
Once this is corrected, another issue for TSO packets is revealed. The
driver sets IFLIB_NEED_ZERO_CSUM in order to enable a work around that
causes the ip->sum field to be zero'd. This is necessary for ix
hardware to correctly perform TSOs.
However, if TXCSUM is disabled, then the work around is not enabled, as
CSUM_IP will not be set when the iflib stack checks to see if it should
clear the sum field.
Fix this by adding IFLIB_TSO_INIT_IP to the iflib flags for the ix and
ixv interface files.
Once both of these changes are made, the ix and ixv drivers should
correctly offload TSO packets when TSO offload is enabled, regardless
of whether TXCSUM is enabled or disabled.
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: IntelNetworking
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18470
From Piotr:
This patch introduces adapter->task_requests register responsible for
recording requests for mod_task, msf_task, mbx_task, fdir_task and
phy_task calls. Instead of enqueueing these tasks with
GROUPTASK_ENQUEUE, handlers will be called directly from
ixgbe_if_update_admin_status() while holding ctx lock.
SIOCGIFXMEDIA ioctl() call reads adapter->media list. The list is
deleted and rewritten in ixgbe_handle_msf() task without holding ctx
lock. This change is needed to maintain data coherency when sharing
adapter info via ioctl() calls.
Patch co-authored by Krzysztof Galazka <krzysztof.galazka@intel.com>.
PR: 221317
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: sbruno@, IntelNetworking
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18468
lagg_capabilities() will set the capability once interfaces supporting
the feature are added to the lagg. Setting it on a lagg without any
interfaces is pointless as the if_snd_tag_alloc call will always fail
in that case.
Reviewed by: hselasky, gallatin
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19040
The pfil(9) system is about to be converted to epoch(9) synchronization, so
we need [temporarily] go back with ipfw internal locking.
Discussed with: ae
iflib is already a module, but it is unconditionally compiled into the
kernel. There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.
Reviewed by: marius
Discussed with: erj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19041
Then bucket_alloc() also selects bucket size based on uz_count. However,
since zone lock is dropped, uz_count may reduce. In this case max may
be greater than ub_entries and that would yield into writing beyond end
of the allocation.
Reported by: pho
image as not compatible with ASLR.
Requested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D5603
length of the struct in memmove() rather than an unintialized variable.
This fixes the first of two kernel page faults when ipfs is invoked.
PR: 235110
Reported by: David.Boyd49@twc.com
MFC after: 2 weeks
SIFTR does not allow any kind of filtering, but captures every packet
processed by the TCP stack.
Often, only a specific session or service is of interest, and doing the
filtering in post-processing of the log adds to the overhead of SIFTR.
This adds a new sysctl net.inet.siftr.port_filter. When set to zero, all
packets get captured as previously. If set to any other value, only
packets where either the source or the destination ports match, are
captured in the log file.
Submitted by: Richard Scheffenegger
Reviewed by: Cheng Cui
Differential Revision: https://reviews.freebsd.org/D18897
