clock_gettime(2) on ARMv7 and ARMv8 systems which have architectural
generic timer hardware. It is similar how the RDTSC timer is used in
userspace on x86.
Fix a permission problem where generic timer access from EL0 (or
userspace on v7) was not properly initialized on APs.
For ARMv7, mark the stack non-executable. The shared page is added for
all arms (including ARMv8 64bit), and the signal trampoline code is
moved to the page.
Reviewed by: andrew
Discussed with: emaste, mmel
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4209
Boundary Trace to assembly to reduce the overhead of these checks.
Submitted by: Howard Su <howard0su@gmail.com>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4266
This fixes detection of root interrupt controller for cases,
when interrupt parent is not defined at all or it's not defined directly
in controller node.
Approved by: kib (mentor)
- add new TEX class for WT cacheable memory
- export new TEX class to kernel as VM_MEMATTR_WT attribute
- add new aliases VM_MEMATTR_WRITE_COMBINING and
VM_MEMATTR_WRITE_BACK, it's used in DRM code
Note:
Only Cortex A8 supports WT caching in HW. On rest of Cortex CPUs,
WT requests is treated as uncacheable.
Approved by: kib (mentor)
sysent.
sv_prepsyscall is unused.
sv_sigsize and sv_sigtbl translate signal number from the FreeBSD
namespace into the ABI domain. It is only utilized on i386 for iBCS2
binaries. The issue with this approach is that signals for iBCS2 were
delivered with the FreeBSD signal frame layout, which does not follow
iBCS2. The same note is true for any other potential user if
sv_sigtbl. In other words, if ABI needs signal number translation, it
really needs custom sv_sendsig method instead.
Sponsored by: The FreeBSD Foundation
so that code shared between imx5 and imx6 can work with OIDs under that node.
Add last_reset_status (integer) and last_reset_reason (string) OIDs that
provide info about the last chip reset (power-on, software reset, watchdog
timeout).
Replace tlb_flush_local() by tlb_flush() as even not global mappings
could be fetched to TLB(s) on other cores by speculative table walk.
From OS point of view, it was not a problem as either such mappings
were not used anymore or they were flushed from TLB(s) when reused.
However, from hardware point of view, it was a problem. Not flushed
mappings could be a target for speculative reads or prefetches (which
might be quite aggresive on ARM cores). As speculative read can fill
cacheline, it can cause a real problem, when physical page is reused,
but mapped with different memory attributes.
Anyhow, it's good to have only valid mappings in TLB(s).
Approved by: kib (mentor)
of the SRS (software reset) bit in the watchdog control register. Despite
what the manual seems to imply, this bit DOES trigger an immediate reset, as
opposed to simply flagging the type of reset as software-triggered.
created for bus_dma_tag_t tag, bounce pages should be allocated
only if needed.
Before the fix, they were allocated always if BUS_DMA_COULD_BOUNCE flag
was set but BUS_DMA_MIN_ALLOC_COMP not. As bounce pages are never freed,
it could cause memory exhaustion when a lot of such tags together with
their maps were created.
Note that there could be more maps in one tag by current design.
However BUS_DMA_MIN_ALLOC_COMP flag is tag's flag. It's set after
bounce pages are allocated. Thus, they are allocated only for first
tag's map which needs them.
Approved by: kib (mentor)
Drivers can request DMA to buffers that are not in memory represented
in the vm page arrays. Because of this, store KVA of already mapped
buffer to synclist and use it in dma_dcache_sync().
Reviewed by: jah
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D4120
This structure must be binary compatible regardless of PMAP
version being used. Create reserved section for NEW_PMAP to
make other variables be placed exactly in the same memory
addresses. This fixes kgdb/gdb behavoiur, which uses pcb.h stuctures.
The NEW_PMAP is kernel flag, so it does not propagate to the buildworld,
what makes the tools using pcb.h unable to parse PCB data.
Reviewed by: mmel, kib
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4011
Use proper size of exynos_ehci_softc, not the generic one.
Reviewed by: andrew
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4189
Zybo needs its own DTB and has a different PHY, so add it to
the base kernel. Details on building bootable SD images at
http://www.thomasskibo.com/zedbsd/
Submitted By: Thomas Skibo
since it isn't used for my application. Add back the md device since
it's needed for NanoBSD support. Add in many of the small memory
footprint options from the access points.
With these changes we go from having ~8MB to having ~20MB free,
though free + inactive only goes from ~35MB to ~42MB. We can
also boot a nanobsd image mostly (I had to hand tweak what was
built to represent the final goal).
Move the FDT stuff to the top. We're almost ready to pull the trigger
to moving over to FDT, but something in the MCI driver is freaking out
when we do and that needs fixing first.
Allow manipulation with PSR_A bit on ARMv6+.
Remove declaration of unused functions.
This effectively enables asynchronous aborts on early bootstrap stage,
which previously was not enabled due to an error in enable_interrupts().
PR: 201434
Reported by: Gregory Soutade <soutade at gmail.com>
Approved by: kib (mentor)
function which checks an address for privileged (PL1) write access.
The function is inlined so it does not bring any cost, but makes
function set for checking privileged access complete.
Approved by: kib (mentor)
little-endian configuration for 64-bit variant is supported.
Reviewed by: mmel
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4113
