The fix to override the default python version when building
the sysutils/py-google-compute-engine did not work, and there
are still issues that need to be addressed in the port itself.
See bugzilla 238267 for additional details.
MFC after: 6 days
MFC with: r348438
MFC note: no-op to appease the merge tracker
Sponsored by: The FreeBSD Foundation
netdump waits for acknowledgement from the server for each write. When
dumping page table pages, we perform many small writes, limiting
throughput. Use the netdump client's buffer to buffer small contiguous
writes before calling netdump_send() to flush the MAXDUMPPGS-sized
buffer. This results in a significant reduction in the time taken to
complete a netdump.
Submitted by: Sam Gwydir <sam@samgwydir.com>
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20317
The tests are failing because the return value and output have changed, but
before test code structure adjusted, removing these test cases help people
be able to focus on more important cases.
Discussed with: emaste
MFC with: r348206
Sponsored by: The FreeBSD Foundation
mountd.c uses a single linked list of "struct exportlist" structures,
where there is one of these for each exported file system on the NFS server.
This list gets long if there are a large number of file systems exported and
the list must be searched for each line in the exports file(s) when
SIGHUP causes the exports file(s) to be reloaded.
A simple benchmark that traverses SLIST() elements and compares two 32bit
fields in the structure for equal (which is what the search is)
appears to take a couple of nsec. So, for a server with 72000 exported file
systems, this can take about 5sec during reload of the exports file(s).
By replacing the single linked list with a hash table with a target of
10 elements per list, the time should be reduced to less than 1msec.
Peter Errikson (who has a server with 72000+ exported file systems) ran
a test program using 5 hashes to see how they worked.
fnv_32_buf(fsid,..., 0)
fnv_32_buf(fsid,..., FNV1_32_INIT)
hash32_buf(fsid,..., 0)
hash32_buf(fsid,..., HASHINIT)
- plus simply using the low order bits of fsid.val[0].
The first three behaved about equally well, with the first one being
slightly better than the others.
It has an average variation of about 4.5% about the target list length
and that is what this patch uses.
Peter Errikson also tested this hash table version and found that the
performance wasn't measurably improved by a larger hash table, so a
load factor of 10 appears adequate.
Tested by: pen@lysator.liu.se (with other patches)
PR: 237860
MFC after: 1 month
This silly code segment has existed in the sources since it was brought
into FreeBSD 10 years ago. I honestly have no idea why this was done.
It was possible that I thought that it might have been better to not
set B_ASYNC for the "else" case, but I can't remember.
Anyhow, this patch gets rid of the if/else that does the same thing
either way, since it looks silly and upsets a static analyser.
This will have no semantic effect on the NFS client.
PR: 238167
syscalls.conf is included using "." which per the Open Group:
If file does not contain a <slash>, the shell shall use the search
path specified by PATH to find the directory containing file.
POSIX shells don't fall back to the current working directory.
Submitted by: Nathaniel Wesley Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20476
misleading indentation. This is found by gcc -Wmisleading-indentation
Approved by: erj
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20428
it hasn't been initialized.
This fixes a bug in r346570 that could cause a panic when servicing
TCP_INFO for offloaded connections.
MFC after: 3 days
Sponsored by: Chelsio Communications
size is too small to bootstrap the firstboot_pkgs list.
While here, add the growfs(8) startup script to /etc/rc.conf,
as Vagrant images can be resized by modifying the Vagrantfile.
Reported by: dbaio
PR: 238226
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The ports/head branch recently switched to python3 as the default,
which breaks the sysutils/py-google-compute-engine startup scripts,
as lang/python installs lang/python3{,.x} where lang/python2{,.x}
are needed.
Set DEFAULT_VERSIONS in release/tools/gce.conf to python=2.7, and
remove the lang/python3 inclusion in VM_EXTRA_PACKAGES.
Additionally, unset DEFAULT_VERSIONS in release/tools/vmimage.subr
to prevent persistence of DEFAULT_VERSIONS=python=2.7 in subsequent
VM/cloud image builds.
Note: at present, this affects only 13-CURRENT and 12-STABLE, as
the stable/11 branch had already switched to using the 2019Q2 branch
at the start of the 11.3-RELEASE cycle, so this does not immediately
affect 11.3-BETA, hence the 1-week merge timeout. This had been
manually tested on 13-CURRENT.
Reported by: ler (privately)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This is the common case when strip(1) is creating the output file.
The change provides a significant speedup when running on ELF files with
many sections.
PR: 234949
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20444
Probably due to historical reasons the driver uses In/Out arguments in
odd way. While this tool still never uses Out arguments to see that,
make the code to not trigger EINVAL in possible future uses.
MFC after: 2 weeks
The order is correct, it is nullfs vnode interlock -> lower vnode
interlock. vop_stdadd_writecount() is called from nullfs
VOP_ADD_WRITECOUNT() and both take interlocks.
Requested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
struct xucred. Do not bump XUCRED_VERSION as struct layout is not changed.
PR: 215202
Reviewed by: tijl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20415
ENAv2 introduces many new features, bug fixes and improvements.
Main new features are LLQ (Low Latency Queues) and independent queues
reconfiguration using sysctl commands.
The year in copyright notice was updated to 2019.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The issues were pointed in community review:
https://reviews.freebsd.org/D10427#inline-67587
Also, fix other issues found by the igor tool.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
For easier debugging, the reset is being triggered and the reset reason is
being set only in case it is done for the first time. Such approach will
ensure that the first reset reason is not going to be overwritten and
will make it easier for debugging.
Also, add a reset trigger upon invalid Tx requested ID.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the call to ena_up() in ena_restore_device() fails, next usage of
`ifconfig up` will cause NULL pointer dereference.
This patch adds additional checks to prevent that.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Some messages were missing new line character and traces were not having
unified behavior. To fix that, each trace and printout should add new
line character at the end of each string - that should improve
readability.
Submitted by: Rafal Kozik <rk@semihalf.com>
Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the headers of the packets are split into multiple segments of the
mbuf chain, the previous version of ena_tx_csum which was assuming,
that all segments will lay in the first mbuf, will eventually fail to
map the headers properties to meta descriptor.
That will cause Tx checksum offload to do not work and was leading to
memory corruption. It could even cause the crash of the system.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
For alignment with Linux driver and better handling ena_detach(), the
reset is now calling ena_device_restore() and ena_device_destroy().
The ena_device_destroy() is also being called on ena_detach(), so the
code will be more readable.
The watchdog is now being activated after reset only, if it was active
before.
There were added additional checks to ensure, that there is no race with
the link state change AENQ handler.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the ENA can have multiple states turned on/off, it is more convenient
to store them in single bitfield instead of multiple boolean variables.
The bitset FreeBSD API was used for the bitfield implementation, as it
provides flexible structure together with API which also supports atomic
bitfield operations.
For better readability basic macros from API were wrapped into custom
ENA_FLAG_* macros, which are filling up common parameters for all calls.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Before the patch, error handling was not releasing all resources and
was not issuing device reset if the reset task failed.
That could cause memory leak and fault of the device.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The host info bdf field is the abbreviation for the bus, device,
function of the PCI on which the device is being attached to.
Now the driver is filling information about that using FreeBSD RID
resource.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The new ENA HAL is introducing API, which can determine on Tx path if
the doorbell is needed.
That way, it can tell the driver, that it should call an doorbell.
The old threshold value wasn't removed, as not all HW is supporting this
feature - so it was reworked to also work with the new API.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The Rx ring size can be as high as 8k. Because of that we want to limit
the cleanup threshold by maximum value of 256.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
LLQ (Low Latency Queue) is the feature, that allows pushing header
directly to the device through PCI before even DMA is triggered.
It reduces latency, because device can start preparing packet before
payload is sent through DMA.
To speed up sending data through PCI, the Write Combining is enabled,
which allows hardware to buffer data before sending them on the PCI - it
allows to reduce number of PCI IO operations.
ENAv2 is using special descriptor for the negotiation of the LLQ.
Currently, only the default configuration is supported.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Handle IO interrupts using filter routine. That way, the main cleanup
task could be moved to the separate thread using taskqueue.
The deferred Rx cleanup task was removed, and now the cleanup task is
begin called instead. That way, the Rx lock could be removed.
In addition, Queue management (wake up and stop TX ring) was added, so
the TX cleanup task can be performed mostly lockless.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The driver now supports per adapter tuning of buffer ring size and HW Rx
ring size.
It can be achieved using sysctl node dev.ena.X.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the requested ID was out of range, the tx_info structure was NULL and
the function was trying to access the field of the NULL object.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The if_detach was causing crash if the MSI-x configuration in the attach
failed. To prevent this issue, the ifnet is being configured at the end
of the attach function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
In rare case, when the ifconfig is called just before kldunload, it is
possible, that ena_up routine will be called after queue locks are
released.
To prevent that, ifp is detached before the last ena_down is called and
further, the ifp is freed at the end of the function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The ENA driver needs at least 2 MSI-x - one for admin queue, and one for
IO queues pair. If there were not enough resources to allocate more than
one MSI-x, the device should not be attached.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
bus_alloc_resource_any() is not returning error value in case of an
error.
If the function call fails, the error value was not passed to the
ena_up() function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
To prevent errors from assigning values from the DMA structure in case
of an error, zero the vaddr and paddr values upon failure.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
