This is a fix to r334065.
Without this change I once got stuck I/O with endless partition switching:
(sdda0:aw_mmc_sim2:0:0:0): sddastart
(sdda0:aw_mmc_sim2:0:0:0): Partition 0 -> -525703168
(sdda0:aw_mmc_sim2:0:0:0): xpt_action: func 0x91d XPT_MMC_IO
(sdda0:aw_mmc_sim2:0:0:0): xpt_done: func= 0x91d XPT_MMC_IO status 0x1
(sdda0:aw_mmc_sim2:0:0:0): sddadone
(sdda0:aw_mmc_sim2:0:0:0): Card status: 00000000
(sdda0:aw_mmc_sim2:0:0:0): Current state: 4
(sdda0:aw_mmc_sim2:0:0:0): Compteting partition switch to 0
Note that -525703168 (an int) is 0xe0aa6800 in binary representation.
The partition indexes are actually stored as uint8_t, so that value
was converted / truncated to zero.
MFC after: 1 week
cam_sim_free(), cam_sim_release(), and cam_sim_hold() all assign
a mtx variable during declaration and then if NULL or the mtx is
held may re-asign the variable and/or acquire/release a lock.
Harmonize the code, avoiding double assignments and make it look
the same for all three function (with cam_sim_free() not needing
an extra case).
No functional changes intended.
Reviewed by: imp; no-objections by: mav
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26286
It allows to report GEOM::lunid for nda(4) same as for nvd(4). Since
NVMe now allows multiple LUs (namespaces) with multiple paths unique
LU identification is important. The serial_num field is filled same
as before with the controller serial number, while device_id is based
on namespace GUID and/or EUI64 fields as recommended by "NVM Express:
SCSI Translation Reference" and matching nvd(4) at the end.
MFC after: 1 week
In case we are failing to allocate mmcdata, we are returning with
a softc allocated but not attached to anything and thus leak the
memory.
Reviewed by: scottl
MFC after: 2 weeks
X-MFC: only if we also mfc other mmccam changes?
Differential Revision: https://reviews.freebsd.org/D25987
It allows to report to initiator LU identifying information, preset via
"ident_info" and "text_ident_info" options.
Unfortunately it is impossible to implement SET IDENTIFYING INFORMATION,
since we have no persistent storage it requires, so the information is
read-only for initiator and has to be set out-of-band.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
* Downgrade some CAM debug messages from _INFO to _DEBUG level;
* Add KASSERT for the case when we suspect incorrect CAM SIM initialization (using cam_sim_alloc() instead of cam_sim_alloc_dev());
* Use waiting version of xpt_alloc_ccb(), we are not in hurry;
* With the waiting version we cannot get NULL return, so remove the NULL check;
* In some csses, the name of mmcprobe_done has been written as mmc_probedone();
* Send AC_LOST_DEVICE if we, well, lost the device;
* Misc style(9) fixes.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D25843
We cannot sleep during cam proto_announce and sbuf sleeps so use
a static length buffer like nvme(4)
Reviewed by: kibab
Differential Revision: https://reviews.freebsd.org/D25949
This is a generic function start a scan request for the given
cam_sim.
Other driver can now just use this function to request a new rescan.
Submitted by: kibab
In xpt_release_device(), callout_stop() was being called without
holding the mutex (send_mtx) that is used to protect the callout.
So, move the mtx_unlock() call so that it is protected.
MFC after: 1 week
Sponsored by: Spectra Logic
Add ICL_NOCOPY flag to icl_pdu_append_data(), specifying that the method
can just reference the data buffer instead of immediately copying it.
Extend the offload KPI with optional PDU queue method, allowing to specify
completion callback, called when all the data referenced by above has been
transferred and won't be accessed any more (the buffers can be freed).
Implement the above functionality in software iSCSI driver using mbufs
with external storage and reference counter. Note that some NICs (ixl(4))
may keep the mbuf in TX queue for a long time, so CTL has to be ready.
Add optional method to struct ctl_scsiio for buffer reference counting.
Implement it for CTL block backend, allowing to delay free of the struct
ctl_be_block_io and memory it references as needed. In first reincarnation
of the patch I tried to delay whole I/O as it is done for FibreChannel,
that was cleaner, but due to the above callback delays I had to rewrite
it this way to not leave LUN referenced potentially for hours or more.
All together on sequential read from ZFS ARC this saves about 30% of CPU
time and memory bandwidth by avoiding one of 3 memory copies (the other
two are from ZFS ARC to DMU cache and then from DMU cache to CTL buffers).
On tests with 2x Xeon Silver 4114 this allows to reach full line rate of
100GigE NIC. Tests with Gold CPUs and two 100GigE NICs are stil TBD,
but expectations to saturate them are pretty high. ;)
Discussed with: Chelsio
Sponsored by: iXsystems, Inc.
Some automation tries to detect if nvd or nda is in used, and the presence of
both confuses it. Provide a knob to turn off nvd alias creation
(kern.cam.nda.nvd_compat=0) for these situations. The default is the same:
create the nvd compat link.
cs_cmdsn can be incremented with single atomic. expcmdsn/maxcmdsn set in
cfiscsi_pdu_prepare() based on cs_cmdsn are not required to be updated
synchronously, only monotonically, that is achieved with lock there.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
We any way have per-I/O space in CTL_PRIV_FRONTEND, while for PDU private
fields I have better use ideas. Plus to me such use of PDU fields looked
a layering violation.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
I don't see a point to copy io->scsiio.kern_total_len into the request
PDU private field. The io is going to stay with us till the end, and
kern_total_len field is not changed after being first initialized.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
ha_lso is a listening socket (unless bind() has failed), so should use
solisten_upcall_set(NULL, NULL), not soupcall_clear().
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Often, in traiging core files, one only has a traceback of where a
panic occurred. We have probe* and xpt* routines that live in both the
scsi and ata layers with identical names. To make one or the other
stand out, prefix all the probe and xpt routines in ata with an
'a'. I've left the scsi ones alone since they were there first and are
more numerous. I also rejected using #define to do this as being too
confusing. I chose this method because the CAM name for the probe
device was already 'aprobe'.
Normally, this doesn't matter because file scope protects one from
interfering with the other. However, due to the indirect nature of
CAM's state machine, you don't know if the following traceback is
SCSI or ATA:
xpt_done
probedone
xpt_done_process
xpt_done_td
fork_exit
nvme and mmc already have unique names.
MFC: 1 week
Differential revision: https://reviews.freebsd.org/D24825
While there, remove ifdef around cs_target check in cfiscsi_ioctl_list().
I am not sure why this ifdef was added, but without this check code will
crash below on NULL dereference.
Submitted by: Aleksandr Fedorov <aleksandr.fedorov@itglobal.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24587
run it). Make sure that we do. Simplify the flow a bit, and fix a
comment since we do need to do these things.
Noticed by: cperciva (not sure why my invariants kernel didn't trigger)
- Make ctl_add_lun() synchronous. Asynchronous addition was used by
Copan's proprietary code long ago and never for upstream FreeBSD.
- Move LUN enable/disable calls from backends to CTL core.
- Serialize LUN modification and partially removal to avoid double frees.
- Slightly unify backends code.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
- maxio should be dp->d_maxsize. This is often MAXPHYS, but not always
(especially if MAXPHYS is > 1MB).
- Unlock the periph before returning. We don't need to relock it to
release the ccb.
- Make sure we release the ccb in error paths.
Reviewed by: cperciva
With these two ioctls implemented in the nda driver, nvmecontrol now
works with nda just like it does with nvd. It eliminates the need to
jump through odd hoops to get this data.
