`*` means that packets will be received from a remote peer on any port.
Since the point of interest is the syslogd instance (not the remote peer),
the appropriate verb is "received", not "sent".
MFC after: 1 month
X-MFC with: r314563
Sponsored by: Dell EMC Isilon
Move cxgbetool from tools/tools to usr.sbin. Compile and install it on
platforms where cxgbe(4) is built by default. Knobs (WITH_CXGBETOOL and
WITHOUT_CXGBETOOL) have been added so that the user can override the
default setting.
Reviewed by: ngie@, gnn@, bdrewery@
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D9854
- Clarify -p/-S options by using appropriate subject-verb modifiers
(verb and modifiers suggested that the subject should have been
singular).
- Simplify/correct -a description:
-- Be more terse when describing IPv4 (the "usual dotted notation"
isn't necessarily well understood by the reader). Being blunt and
saying "IPv4 address" with an optional netmask is.
-- prefixlen is the appropriate terminology for IPv6.
-- mask/prefixlen is optional, not required (as noted later on in the
section).
-- split up IPv4/IPv6 use so to clarify both forms.
-- Fix wordiness when describing the optional "service" specifier.
- -T: Use "cannot" instead of "can't" [*].
Bump .Dd for the changes.
MFC after: 1 month
Reported by: igor [*]
Reviewed by: hrs
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9855
- Use SRCTOP-relative paths instead of .CURDIR-relative ones where possible
- Use :H to manipulate .CURDIR in areas instead of ..-relative paths.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
- Use SRCTOP-relative paths to other directories instead of
.CURDIR-relative ones. This simplifies pathing in make/displayed output.
- Also, use :H where possible/sensical to manipulate .CURDIR-relative
paths
- Remove superfluous bsd.own.mk .includes which are already handled via
src.opts.mk .includes
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Also, use :H where possible/sensical to manipulate .CURDIR-relative paths
This simplifies pathing in make/displayed output.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
The SRCTOP conversion simplifies pathing in make/displayed output.
Also, while here, change a hardcoded path to ${RPCDIR}/ypxfrd.x in
the make targets with ${.ALLSRC} .
MFC after: 1 week
Sponsored by: Dell EMC Isilon
The SRCTOP conversion simplifies pathing in make/displayed output.
Also, while here, change a hardcoded path to ${RPCDIR}/ypupdate_prot.x in
the make targets with ${.ALLSRC} .
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This is a trivial simplification in the Makefile, meant to serve as
a good example for what to do with rules like this.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This is a trivial simplification in the Makefile, meant to serve as
a good example for what to do with rules like this.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
The SRCTOP conversion simplifies pathing in make/displayed output.
Also, while here, change a hardcoded path to ar5523.bin.uu in the make target
with ${.ALLSRC} .
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
This removes the hardcoded value for the field (16) and the equivalent
hardcoded lengths in logmsg(..).
This change is being done to help stage future work to add RFC5424/RFC5434
support to syslogd(8).
Obtained from: Isilon OneFS (dcd33d13da) (as part of a larger change)
Submitted by: John Bauman <john.bauman@isilon.com>
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Exit after printing a message on stderr when we can't get a
message. This is slightly different than linux, but keeps shell
scripts from thinking the value of the variable is the error message
and so is a net win.
Sponsored by: Netflix
As discussed previously, in order to introduce new OS hardening
defaults, we've added them to bsdinstall in 'off by default' mode.
It has been there for a while, so the next step is to change them
to 'on by defaul' mode, so that in future we could simply enable
them in base OS.
Reviewed by: brd
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D9641
The condition can be hit with simple user input, so it isn't an invariant.
Just error out.
PR: 217003
Reported by: Vladislav V. Prodan <admin at support.od.ua>
Sponsored by: Dell EMC Isilon
From NetBSD christos Sat Jan 26 00:19:39 2013 +0000
make the buffer functions look exactly like the kernel ones and add other
cruft to make the kernel files compile.
ffs.c 1.54
ffs/buf.c 1.13
ffs/buf.h 1.3
ffs/ffs_alloc.c 1.21
ffs/ffs_balloc.c 1.15
Reviewed by: marcel, ngie
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8404
ld.bfd generates two PT_LOAD segments, but certain linkers or linker
configurations generate three PT_LOAD segments (one additional for
RELRO).
PR: 216975
Reported by: Shawn Webb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
* 'blackhole' and 'reject' are mutually exclusive, replace printf() by errx()
when both are selected.
* 'trail' option is no longer supported since first import of arp from 4.4BSD.
XXX message was added 13 years ago in r128192. I believe it's time to remove
it.
* Use warnx() to print some informative messages instead of printf()
* Replace strncmp() by strcmp() when validating parameters and exit when invalid
parameter is found
Reviewed by: allanjude, vangyzen, cem
Approved by: allanjude
MFC after: 1 week
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D9504
* DISTDIR_IS_UNIONFS is set every time BSDINSTALL_DISTDIR is mounted inside
BSDINSTALL_CHROOT. Use this flag to decide if it needs to be umounted
* BSDINSTALL_CHROOT/dev is mounted when 'bsdinstall mount' is called, there is
no need to mount it again when user goes to shell after installation
Reviewed by: allanjude
Obtained from: pfSense
MFC after: 1 week
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D8573
This interface type ("a parent interface of wlanX") is not used since
r287197
Reviewed by: adrian, glebius
Differential Revision: https://reviews.freebsd.org/D9308
If "capacity" LU option is set, ramdisk backend now implements featured
thin provisioned disk, storing data in malloc(9) allocated memory blocks
of pblocksize bytes (default PAGE_SIZE or 4KB). Additionally ~0.2% of LU
size is used for indirection tree (bigger pblocksize reduce the overhead).
Backend supports all unmap and anchor operations. If configured capacity
is overflowed, proper error conditions are reported.
If "capacity" LU option is not set, the backend operates mostly the same
as before without allocating real storage: writes go to nowhere, reads
return zeroes, reporting that all LBAs are unmapped.
This backend is still mostly oriented on testing and benchmarking (it is
still a volatile RAM disk), but now it should allow to run real FS tests,
not only simple dumb dd.
MFC after: 2 weeks
CID 1341620 Fix a small memory leak
CID 1341630 Though this is technically a false positive, rearrange the
code for clarity.
CID 1341635 Eliminate dead code
CID 1368663 Fix a double mutex unlock in the error path
Also:
* Use sig_atomic_t for variables accessed from signal handlers
* Don't conditionalize free(3) on its argument being non-null
Reported by: Coverity
CID: 1341620 1341630 1341635 1368663
Reviewed by: ken
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9237
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
Connection parameters should remain at defaults until negotiated.
While there, remove sythetic limits, applied if kernel provided none.
iscsid has no own limitations, no configuration and no any idea what
values are good. Assume kernel knows what it requests.
If initiator does not negotiate some parameter, it expects one to get
default value, not some unknown remote hardware limit. On the side side,
if some parameter is negotiated, its default value from RFC should not
be used for anything.
- Only #include tcpd.h when LIBWRAP is true to avoid header include errors
- Only define whichaf when LIBWRAP is true to avoid -Wunused warning and
to avoid issues with structs being defined that should only be defined
when tcpd.h is included.
MFC after: 2 weeks
X-MFC with: r312105
Pointyhat to: ngie
Reported by: gcc tinderbox
Sponsored by: Dell EMC Isilon
This will allow inetd to stand by itself without libwrap.
MFC after: 2 weeks
Relnotes: yes
Reviewed by: hrs (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9056
case was the full disk image from the website, which was never
checked in to svn)
Regardless, the testcase still fails
PR: 214908
Sponsored by: Dell EMC Isilon
Disk image obtained from:
http://www.cfreds.nist.gov/dfr-images/dfr-01-xfat.dd.bz2 -- was ripped off the
first GPT partition and verified to be a FAT-like partition with file(1)/hexdump.
This testcase currently fails
PR: 214908
Sponsored by: Dell EMC Isilon
The variables in question are actually return arguments, but it's still good
form to initialize them.
Reported by: Coverity
CID: 979679 979680
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Reallow device selectors to have a trailing colon, as documented in the
manual page. This was broken along with some unrelated cleanups in
r295806.
PR: 215979
Reported by: David Boyd <David.Boyd49 at twc.com>
Sponsored by: Dell EMC Isilon
Fix a clang 4.0.0 warning about taking the address of a packed member of
struct mfi_evt in mfiutil:
usr.sbin/mfiutil/mfi_evt.c:583:30: error: taking address of packed
member 'members' of class or structure 'mfi_evt' may result in an
unaligned pointer value [-Werror,-Waddress-of-packed-member]
if (parse_locale(optarg, &filter.members.locale) < 0) {
^~~~~~~~~~~~~~~~~~~~~
Use a local variable instead, and copy that into the struct.
Reviewed by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9069
This change also documents the modification harti made to a handful of
objects in r122758 (the max OCTET STRING width was increased from 15 to
31 octets)
MFC after: 1 week
