Commit Graph

120 Commits

Author SHA1 Message Date
julian
5596676e6c KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
phk
c47745e977 Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
peter
4d1a3bb86f Use ttymalloc() instead of roll-our-own. 2001-02-19 04:53:55 +00:00
jlemon
11781a7431 Extend kqueue down to the device layer.
Backwards compatible approach suggested by: peter
2001-02-15 16:34:11 +00:00
dwmalone
dd75d1d73b Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
phk
ff5cdfae2d Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
phk
94a5006c9a Remove unneeded #include <sys/proc.h> lines. 2000-10-29 13:57:19 +00:00
jhb
220ad0d5b5 This driver doesn't have a software interrupt handler, so don't attempt to
schedule a non-existant handler to run.
2000-10-25 21:29:36 +00:00
phk
beadbd4365 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
peter
3176716b49 Always leave SP_DCEN on (monitor DCD). Otherwise the firmware *really*
does ignore DCD.  Even TIOCMGET cannot read DCD as the firmware doesn't
report it.  This has pretty interesting effects for ppp(8) which runs
in clocal mode and polls carrier (!).  (Specialix's linux driver does
this too)

Also update the firmware to 3.0.6 for the SX cards, as apparently there
was a problem with floating (disconnected) DCD pins causing stray carrier
transitions, especially at port open time.

It seems to work here, and carrier loss is detected nearly immediately
rather than having to wait for a LQR timeout (a few minutes) before ppp(8)
gives up.

DCD problem noted by: nsayer
2000-01-25 16:45:54 +00:00
peter
8df9215e54 Ack! I totally botched the pci probe routine which resulted in it trying
to match everything else *but* a specialix pci card. *blush*.
2000-01-24 08:11:10 +00:00
peter
eecb860927 A bit more newbusification of si. This still isn't quite finished.
Split out the bus attachments so the impact of the bus xxxvar.h files
with the inline macros for the ivars are confined to one file each.
2000-01-24 07:24:02 +00:00
peter
1f56e7164c Initial attempt at newbusification of the specialix si/xio/sx driver.
The files were repo copied from their original location and are part
way towards being portable.
This should unbreak the EISA support in the driver.
I have not updated files* yet as I'm not quite finished.
2000-01-23 22:51:49 +00:00
peter
1edd95c9cf Fix some -Wunused warnings 1999-11-18 08:43:58 +00:00
peter
986eaaa550 Zap cdevsw_add() - the make_dev's take care of it and don't use
the cdevsw[] array.
1999-10-08 18:27:20 +00:00
phk
5e9f92ecf7 Introduce ttyread() and ttywrite() which do the canonical thing.
Use them in many tty drivers.

Reviewed by: julian, bde
1999-09-28 11:45:31 +00:00
phk
e9e0512210 Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
phk
a2c68c62db This patch clears the way for removing a number of tty related
fields in struct cdevsw:

        d_stop          moved to struct tty.
        d_reset         already unused.
        d_devtotty      linkage now provided by dev_t->si_tty.

These fields will be removed from struct cdevsw together with
d_params and d_maxio Real Soon Now.

The changes in this patch consist of:

        initialize dev->si_tty in *_open()
        initialize tty->t_stop
        remove devtotty functions
        rename ttpoll to ttypoll
        a few adjustments to these changes in the generic code
        a bump of __FreeBSD_version
        add a couple of FreeBSD tags
1999-09-25 16:21:39 +00:00
phk
b5f0a40b0d Null commit to get last commit message recorded:
Avoid name clash with dev_t member si_tty.
1999-08-30 20:52:14 +00:00
phk
f82f3c42eb *** empty log message *** 1999-08-30 20:47:29 +00:00
peter
3b842d34e8 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
peter
f998391e21 A few style changes (fixes hopefully) and some more tidying up. Fix (?)
the volatile cast warnings.
1999-08-27 08:32:54 +00:00
peter
ef5c098b80 Don't return 0 for an unknown ioctl (!). This was breaking ppp(8).
Slight tidy up while here.
1999-08-27 06:53:34 +00:00
phk
663cbe4fc2 Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
nsayer
09c9e5f0dd printf("%x",dev); -> printf("%s",devtoname(dev)); 1999-08-18 17:42:41 +00:00
phk
6a5dc97620 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
phk
7e4a9dced9 This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
peter
41b420910c Simplify the COMPAT_PCI_DRIVER/DATA_SET hack. We can add:
#define COMPAT_PCI_DRIVER(name,data) DATA_SET(pcidevice_set,data)
.. to 2.2.x and 3.x if people think it's worth it.  Driver writers can do
this if it's not defined.  (The reason for this is that I'm trying to
progressively eliminate use of linker_sets where it hurts modularity and
runtime load capability, and these DATA_SET's keep getting in the way.)
1999-05-09 17:07:30 +00:00
phk
bac74fbd54 Fix some of the places where too much inside knowledge about major/minor
layout and dev_t structure is being (ab)used.
1999-05-08 07:02:41 +00:00
peter
54dfe89d2e These two drivers have not been converted for newbus eisa yet. 1999-05-02 20:35:44 +00:00
dt
ba8c622703 s/static foo_devsw_installed = 0;/static int foo_devsw_installed;/.
(Edited automatically)
1999-04-28 10:54:24 +00:00
phk
16e3fbd2c1 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
peter
d6f4bd18f5 Use COMPAT_PCI_DRIVER() for registration if it exists. This shouldn't
hurt the driver portability to 3.x too much for where drivers are shared.
1999-04-24 20:17:05 +00:00
eivind
94b16edfb7 Staticize. 1999-04-11 03:06:07 +00:00
nsayer
1c6633520f SX ISA cards are only 32k wide in 8 bit mode (which is the only
mode supported by the manufacturer).

PR:		6255
Submitted by:	nsayer
1999-03-30 21:22:39 +00:00
peter
b1c85cae2e Update Specialix download microcode for the transputer based serial host
cards from the 3.0-beta to 3.0.4 release.

Submitted-by:  Nick Sayer <nsayer@quack.kfu.com>
PR: 10674
1999-03-24 02:49:43 +00:00
phk
67f187760e Use suser() to check for super user rather than examining cr_uid directly.
Use TTYDEF_SPEED rather than 9600 a couple of places.

Reviewed by:	bde, with a few grumbles.
1999-01-30 12:17:38 +00:00
eivind
4e34ff4e34 Silence warnings. 1999-01-12 00:36:36 +00:00
bde
bb396c130c Fixed printf format errors. `struct eisa_device' uses a strange type
for the unit number (like most SCSI drivers).
1998-08-23 10:12:12 +00:00
bde
35fa873125 Added D_TTY to the cdevswitch flags for all tty drivers. This is required
for the Lite2 fix for always returning EIO in dead_read().

Cleaned up the cdevswitch initializers for all tty drivers.

Removed explicit calls to ttsetwater() from all (tty) drivers.  ttsetwater()
is now called centrally for opens, not just for parameter changes.
1998-08-23 08:26:42 +00:00
bde
e14b44bbf3 Cast an int to (intptr_t) before casting it to (void *).
Don't cast a pointer to a long just to print it.
1998-08-16 01:04:48 +00:00
bde
0277aae350 Fixed yet more ioctl breakage due to the type of the `cmd' arg chaninging
from int to u_long but not changing here.
1998-08-16 00:57:07 +00:00
steve
84ee66217a Add a macro tweak.
PR:		6932
Submitted by:	Nick Sayer <nsayer@quack.kfu.com>
1998-06-13 19:36:22 +00:00
phk
9bf9507295 Correct name and number for sxdc modules
PR:		6891
Reviewed by:	phk
Submitted by:	Nick Sayer <nsayer@quack.kfu.com>
1998-06-10 12:49:54 +00:00
dfr
1d5f38ac22 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
bde
b5ae2c779b Removed unused #includes. 1998-03-28 13:25:01 +00:00
peter
0ddeeb0ae5 Several changes:
- Implement proper EISA probing.
 - Better support for the new transputer based host cards.
 - use standard termios settings, one can use the intial/lock devices.
 - use a simple bcopy since some cards/systems apparently don't support
   32 bit accesses.
 - hard reset and halt host card CPU prior to download in case of a soft
   restart.
 - recognize new remote module types (ASIC vs. CD1400 based)
 - a number of cosmetic changes (my fault, not Nick's)

Submitted by:  Nick Sayer <nsayer@quack.kfu.com>
1998-03-23 16:27:43 +00:00
peter
7cedb4afa6 New versions of Specialix host card download code.
Submitted by:  Nick Sayer <nick@quack.kfu.com>
1998-03-23 16:12:53 +00:00
peter
30c12fe99a merge from 2.2 1998-03-21 06:17:14 +00:00
peter
313d920e80 Merge from 2.2, plus some other changes. In the config file entry,
'vector siintr' isn't used since the handler is assigned internally.
1998-03-21 05:17:29 +00:00