targets, similar to what is done for the run-autotools-fixup
override for non-arm targets.
MFC after: 3 days
Tested on: 12-CURRENT building 10-STABLE
Sponsored by: The FreeBSD Foundation
it's defined, installation image is shipped without source distribution
(src.txz)
Add the hability of defining NOSRC in release.conf and pass it to
'make release' argument
Approved by: gjb
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D6710
when re-using build chroot(8) environments.
This is based on the patch in the PR referenced below, but instead
of using 'reinstall' in two locations (one of which already uses
FORCE_PKG_REGISTER=1), changes the non-embedded behavior.
PR: 205998
Submitted by: ngie
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
This was discussed during the 10.2-RELEASE cycle, however
since we were nearing the end of the cycle, we decided to
defer this change until after 10.2-RELEASE.
Reminded by: so (delphij), jmg
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
set to empty values, which would result in nonintuitive build
errors.
MFC after: 3 days
X-MFC-With: r288341
PR: 203420 (related to)
Sponsored by: The FreeBSD Foundation
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Help from: many (boot testing, feedback, etc.)
Sponsored by: The FreeBSD Foundation
standard 'install' location for other architectures), then
compress the image with xz(1), and generate the CHECKSUM
files.
Sponsored by: The FreeBSD Foundation
before attempting to mount(8) devfs. Also, create the
.OBJDIR for the 'release' target, so files end up in the
correct location.
In tools/arm.subr, fix the target device when creating the
gpart partition scheme.
Sponsored by: The FreeBSD Foundation
building arm images. This is similar to tools/vmimage.subr
used for building virtual machine disk images. By default,
only arm_create_disk() and arm_install_base() contain real
functionality here, and arm_install_uboot() must be overridden
in the arm/KERNEL.conf file.
In release.sh, make create_arm_armv6_build_release() do
something now.
In arm/BEAGLEBONE.conf, set IMAGE_SIZE, PART_SCHEME, FAT_SIZE,
FAT_TYPE, and MD_ARGS, as well as make arm_install_uboot()
functional.
Parts of this were taken from disecting a previous BEAGLEBONE
image, and other parts obtained from Crochet sources.
Sponsored by: The FreeBSD Foundation
EMBEDDEDBUILD, EMBEDDED_TARGET, EMBEDDED_TARGET_ARCH,
EMBEDDEDPORTS, and KERNEL.
In release.sh, set TARGET and TARGET_ARCH to the
EMBEDDED_* variants from the configuration file.
Sponsored by: The FreeBSD Foundation
While here, move CHROOT_* and RELEASE_* variables from
env_setup() to env_check() since they may change if
a release.conf file is used.
Sponsored by: The FreeBSD Foundation
clear the workflow:
- env_setup()
- env_check()
- chroot_setup()
- extra_chroot_setup()
- chroot_build_target()
- chroot_build_release()
There should be no functional changes at this point.
Sponsored by: The FreeBSD Foundation
In release.sh, allow overriding buildenv_setup() before
the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and
the correct KERNEL, and add the buildenv_setup() override
to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf,
and set the correct entries for the RaspberryPi2 board.
Thanks to: loos@
Sponsored by: The FreeBSD Foundation
building FreeBSD/arm64 VM images and memstick.img installation
medium:
r281786, r281788, r281792:
r281786:
Add support for building arm64/aarch64 virtual machine images.
r281788:
Copy amd64/make-memstick.sh to arm64/make-memstick.sh for
aarch64 memory stick images.
Although arm64 does not yet have USB support, the memstick
image should be bootable with certain virtualization tools,
such as qemu.
r281792:
Add a buildenv_setup() prototype, intended to be overridden as
needed.
For example, the arm64/aarch64 build needs devel/aarch64-binutils,
so buildenv_setup() in the release.conf for this architecture
handles the installation of the port before buildworld/buildkernel.
Sponsored by: The FreeBSD Foundation
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
Sponsored by: The FreeBSD Foundation
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
Sponsored by: The FreeBSD Foundation
ports to prevent ports build failures from killing the
release build.
MFC after: 3 days
X-MFC-with: r270417, r270418
Sponsored by: The FreeBSD Foundation
r269549, r269551, r269552, r269553, r269554, r269555, r269558, r269559,
r269560, r269561, r269628, r269629, r269630, r269635, r269637:
r269549:
Create a new project branch, release-noxdev, for
a sandbox workspace outside of head/ to update the
release bits for arm builds since the deprecation of
the XDEV and XDEV_ARCH make(1) variables.
r269551:
Define load_chroot_env() and load_target_env()
prototypes.
r269552:
Call load_chroot_env() and load_target_env() where
they can be mutually conflicting with regard to
TARGET, TARGET_ARCH, XDEV, and XDEV_ARCH.
r269553:
Add shebang line to arm/*.conf files since these
should be considered to be executable (albeit not
on their own) shell scripts.
r269554:
Redefine load_chroot_env() and load_target_env() in
the arm/*.conf files, and reindent.
r269555:
Simplify where load_chroot_env() and load_target_env() are
called.
r269558:
Provide example in release.conf.sample for overriding the
load_chroot_env() and load_target_env() prototypes.
r269559:
Remove a gratuitous newline.
r269560:
Unset potentially conflicting variables in load_chroot_env()
and load_target_env().
r269561:
Make global variables global, and accessible outside of
the functions within which they were once defined.
r269628:
Remove XDEV/XDEV_ARCH evaluation if EMBEDDEDBUILD is set.
r269629:
In arm/release.sh, switch TARGET/TARGET_ARCH back to the
original XDEV/XDEV_ARCH make(1) variables.
In theory, this should have been a no-op, but the TARGET and
TARGET_ARCH are now unset in load_target_env() to avoid
collision with the chroot userland.
r269630:
Export variables in the arm/*.conf files because they
need to be passed through release.sh to arm/release.sh.
Set MK_TESTS=no for the xdev target.
r269635:
As part of the XDEV/XDEV_ARCH deprecation, the
'xdev-links' target was intentionally no longer
invoked automatically.
Invoke the xdev-links target after xdev, which
creates, for example, /usr/bin/armv6-freebsd-cc
symlink to /usr/armv6-freebsd/usr/bin/cc.
r269637:
Set TARGET and TARGET_ARCH to the XDEV and XDEV_ARCH
counterparts for the xdev and xdev-links make(1)
targets.
Sponsored by: The FreeBSD Foundation
variables. These are intended to allow bypassing the
'svn co /usr/{src,doc,ports}' step in the chroot when the
tree exists from external means.
The use case here is that /usr/src, /usr/doc, and /usr/ports
in the chroot exist as result of zfs dataset clones, so it
is possible (and happens quite often) that the included
distributions may not be consistent. (This is not the case
for -RELEASE builds, but does happen for snapshot builds.)
Tested on: stable/9@r264319
MFC After: 3 days
Sponsored by: The FreeBSD Foundation
When set to a non-empty value, the installation medium is
compressed with gzip(1) as part of the 'install' target in
the release/ directory.
With gzip(1) compression, downloadable image are reduced in
size quite significantly. Build test against head@263927
shows the following:
bootonly.iso: 64% smaller
disc1.iso: 44% smaller
memstick.img: 47% smaller
mini-memstick.img: 65% smaller
dvd1.iso: untested
This option is off by default, I would eventually like to
turn it on by default, and remove the '-k' flag to gzip(1)
so only compressed images are published on FTP.
Requested by: wkoszek
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
release.conf SVNROOT entries that do not have a trailing '/'.
In order to provide a mechanism to use !svn, the trailing '/'
was added to SVNROOT so there were no assumptions being made
about '/' being in the URL between SVNROOT and SRCBRANCH.
Sponsored by: The FreeBSD Foundation
