While it sounds like a good idea to extract the RFC1048 data from PXE, in the
end it is not and it is causing lots of issues. Our pxeloader might need
options which are incompatible with other pxe servers (for example iPXE, but
not only).
Our pxe loaders are also now settings their own user class, so it is useful to
issue our own pxe request at startup
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D10953
All the code are now only issueing one single dhcp request at startup of the
loader meaning we can always request a the PXE informations from the
dhcp server.
Previous code lost that information, meaning no option 55 anymore (meaning not
working with the kea dhcp server) and no request for rootpath etc, no user class
Remove the flags from the bootp function which is not needed anymore
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D10952
Rather that previous attempts to add tftpfs support at the same time as NFS
support. This time decide on a proper URI parser rather than hacks.
root-path can now be define the following way:
For tftpfs:
tftp://ip/path
tftp:/path (this one will consider the tftp server is the same as the one where
the pxeboot file was fetched from)
For nfs:
nfs:/path
nfs://ip/path
The historical
ip:/path
/path
are kept on NFS
Reviewed by: tsoom, rgrimes
Differential Revision: https://reviews.freebsd.org/D10947
The current read from network is working from up to down - we have some
protocol needing the data from the network, so we build the buffer space
for that protocol, add the extra space for headers and pass this buffer
down to be filled by nif get call in hope, we have guessed the incoming
packet size right. Amazingly enough this approach mostly does work, but
not always...
So, this update does work from down to up - we allocate buffer (based
on MTU or frame size info), fill it up, and pass on for upper layers.
The obvious problem is that when we should free the buffer - if at all.
In the current implementation the upper layer will free the packet on error
or when the packet is no longer needed.
While working on the issue, the additional issue did pop up - the bios
implementation does not have generic get/put interface but is using pxe
udpsend/udpreceive instead. So the udp calls are gone and undi interface
is implemented instead. Which in turn means slight other changes as we
do not need to have duplicated pxe implementation and can just use dev_net.
To align packet content, the actual read from nic is using shifted buffer by
ETHER_ALIGN (2).
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D10232
Don't use DHCP 150 option to decide which protocol use to netboot. When
root-path includes ip address - go thru NFS, if ip address not exists in
root-path - go thru TFTP from server which ip address is in next-server. But
there is one limitation - only one tftp server in network to provide loader and
everything else. Does enybody use more than only one?
Submitted by: kczekirda
Sponsored by: Oktawave
MFC after: 3 weeks
Relnote: Yes
Differential Revision: https://reviews.freebsd.org/D8740
The work to make it possible to avoid bcache via using F_NORA modifier did
miss the fact that not all loader platforms are using the bcache, and so
it is possible the modifier is not cleared, as bcache strategy function is
not used.
For fix, we make sure the checks are dont with masked flag.
This patch does fix boot for platforms which do not use bcache.
Reported by: emaste
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D10422
The current multiboot loader code doesn't clean the metadata added to the
kernel after the bi_load64 dry run, which breaks accounting of the required
memory for the metadata.
This issue didn't show itself before because all the metadata items where small
(8bytes), but after r316343 there's a big blob in the metadata, which triggers
this. Fix it by cleaning the metadata added to the kernel after the bi_load64
dry run. Also add a comment describing the memory layout when booting using
multiboot (Xen Dom0).
This unbreaks booting a FreeBSD/Xen Dom0 after r316343.
MFC after: 3 weeks
Sponsored by: Citrix Systems R&D
While we have mechanisms in place to protect ourselves against the read
behind the disk end, there is still one corner case. As the GPT
partition table has backup table at the end of the disk, and we yet
do not know the size of the disk (if the wrong size is provided by the
firmware/bios), we need to limit the reads to avoid read ahead in such case.
Note: this update does add constant into stand.h, so the incremental build
will need to get local stand.h updated first.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D10187
The description tells it all, as an side note, I am using uint8_t instead of
u_char as the partition table data really is handled as byte stream, not
char array.
Reviewed by: allanjude, imp
Differential Revision: https://reviews.freebsd.org/D10180
With some file system the ls is unable to display file types.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D10066
This variable has been unused since its inception in r40106.
MFC after: 3 days
Reported by: amd64-gcc-6.3.0 (devel/amd64-xtoolchain-gcc)
Sponsored by: Dell EMC Isilon
This fixes a -Wempty-body warning with gcc 6.3.0 when PART_DEBUG is undefined.
MFC after: 3 days
Reported by: Jenkins (FreeBSD-head-amd64-gcc job)
Tested with: amd64-gcc-6.3.0 (devel/amd64-xtoolchain-gcc)
Sponsored by: Dell EMC Isilon
Since the uset can set dhcp.interface-mtu, we need to try to validate the
value. So we verify if the conversion to int is successful and we will not
allow to set value greater than max IPv4 packet size.
Also use snprintf for safety.
Reviewed by: allanjude, bapt
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8492
As we provide the disk size verification and correction via disk_ioctl
and disk state provided by disk_open(), we can not share the partition
state in disk_devdesc structure. Also the sharing does make a lot of sense
with ufs, as only one partition is open at any given time, but zfs pools
do keep the disk devices open.
To make sure we do get the correct information about the open device,
just remove the cache.
Reviewed by: allanjude, smh
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9757
The loader bcache is implementing simple read-ahead to boost the cache.
The bcache is built based on 512B block sizes, and the read ahead is attempting
to read number of cache blocks, based on amount of the free bcache space.
However, there are devices using larger sector sizes than 512B, most obviously
the CD media is based on 2k sectors. This means the read-ahead can not be just
random number of blocks, but we should use value suitable also for use with
larger sectors, as for example, with CD devices, we should read multiple of 2KB.
Since the sector size from disk interface is not too reliable, i guess we can
just use "good enough" value, so the implementation is rounding down the read
ahead block count to be multiple of 16.
This means we have covered sector sizes to 8k.
In addition, the update does implement the end of cache marker, to help to
detect the possible memory corruption - I have not seen it happening so far,
but it does not hurt to have the detection mechanism in place.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9179
Need interface to extract information about disk abstraction,
to read disk or partition size depending on the provided argument
and adjust disk size based on information in partition table.
The disk handle from disk_open() has d_offset field to point to
partition start. So we can use this fact to return either whole disk
size or partition size. For this we only need to record partition size
we get from disk_open() anyhow.
In addition, this will also make it possible to adjust the disk media size
based on information from partition table. The problem with disk size is
about some BIOS systems reporting bogus disk size for 2+TB disks, but
since such disks are using GPT partitioning, and GPT does have information
about disk size (alternate LBA + 1), we can use this fact to record disk
size based on partition table.
This patch does exactly this: implements DIOCGSECTORSIZE and DIOCGMEDIASIZE
ioctl, and DIOCGMEDIASIZE will report either disk media size or partition size.
Adds ptable_getsize() call to read partition size in bytes from ptable pointer.
Updates disk_open() to use ptable_getsize() to update mediasize value.
Implements GPT detection function to update ptable size (used by
ptable_getsize()) according to alternate lba (which is location of backup copy
of GPT header table).
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8594
The disk_* and part_* api is using 64bit values for media size and
offsets. However, the current api is using off_t type, which is signed
64-bit int.
In this context the signed media size does not make any sense, and
the offsets are used to mark absolute, not relative locations.
Also, the data from GPT partition table and some other sources is
already using uint64_t data type, so using signed off_t can cause sign
issues.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D8710
after it, which has a conflicting definition of errno. This leads to
the following warning with clang 4.0.0:
In file included from sys/boot/common/reloc_elf32.c:6:
In file included from sys/boot/common/reloc_elf.c:37:
/usr/obj/usr/src/tmp/usr/include/stand.h:155:12: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
extern int errno;
^
sys/sys/errno.h:46:26: note: expanded from macro 'errno'
#define errno (* __error())
^
MFC after: 3 days
Apparently the libstand dosfs optimization is a bit too optimistic
and did introduce possible memory corruption.
This patch is backing out the bad part and since this results in
dosfs reading full blocks now, we can also remove extra offset argument
from dv_strategy callback.
The analysis of the issue and the backout patch is provided by Mikhail Kupchik.
PR: 214423
Submitted by: Mikhail Kupchik
Reported by: Mikhail Kupchik
Reviewed by: bapt, allanjude
Approved by: allanjude (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8644
When WITH_REPRODUCIBLE_BUILD=yes is set in src.conf(5), eliminate the
time, user, and host from the loader's version information. This allows
builds to produce bit-for-bit identical output.
Reviewed by: bapt
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8842
The Makefile rule to create vers.c for loader version info was
previously duplicated in each of the various loader Makefiles.
Instead, share a common rule in Makefile.inc.
Reviewed by: bapt
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8841
Instead of repeating "%s, Revision %s" "(%s %s)" in each loader, just
create the full version string in vers.c
Reviewed by: bapt
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8823
Prior to this change the loader self relocation code interpreted amd64's
rela relocations as if they were rel relocations, discarding the addend.
This "works" because GNU ld 2.17.50 stores the addend value in both the
r_addend field of the relocation (as expected) and at the target of the
relocation.
Other linkers, and possibly other versions of GNU ld, won't have this
behaviour, so interpret the relocations correctly.
Reported by: George Rimar
Reviewed by: andrew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8681
lsdev command does walk over devsw list, prints list element name and
will use dv_print() callback to print the device list.
Unfortunately this approach will add unneeded noise when there are no
particular devices detected.
To remove "empty" device section headers, the dv_print() callback
should print the header instead.
In addition, fixed dv_print callback for md module.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D8551
/loader.rc) to specify a Forth file to read from the pkgfs tarball and
process by Ficl.
This allows for the tarball to do runtime things like load a
platform-specific FDT blob, among other things.
Reviewed by: imp
Approved by: sjg (mentor)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8494
This change does modify devsw dv_print() to return the int value,
enabling walkers to interrupt the walk on non zero value from dv_print().
This will allow the pager_print actually to stop displaying data on
user input, and additionally pager is used in various *dev_print callbacks,
where it was missing.
For test, lsdev [-v] command should display data by screenfuls and should
stop when the key 'q' is pressed on pager prompt.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D5461
FICL definitions not in ficl/ficl32 files broke this generally. This
makes that stuff conditional on BOOT_FORTH. Also, move definitions
related to the architecture (FICL_CPUARCH and friends) into
Makefile.ficl that all parts of the tree that include files with ficl
need to include (but only if MK_FORTH == yes). In addition, had to fix
library ordering issue with LIBSTAND to keep it last. Without boot
forth, there's no references to memset to bring in memset.o from
libstand.a to satisfy libgeliboot.a's use of it. Listing libstand last
solves this issue (and it's the proper place for libstand to boot).
functions to call at the appropriate time to register new forth
words. In the past we've done this with ifdef soup, but now if the
file is included in the build, we'll get the new forth words.
Use this new functionality to move the pci bios stuff out of loader.c
by moving it to biospci.c.
Move the pnp functionality to common/pnp.c.
Move the inb/outb forth words to the i386 sysdep.c file where their
implementation is defined.
Adjust the efi linker scripts and build machinery to cope.
his should be an invisible change to forth scripts and user
experience.
Differential Revision: https://reviews.freebsd.org/D8145
than to store the location of a forth word that is subsequently never
used. It was last used before the 2.03 ficl upgrade in r51786. It was
only used from r43614 (so Feb-Sept 1999) on head and in the 3.x branch
(merged r43715 3.1 -> EOL). Remove it since nobody cared enough to
report the bug in the last 18 years rather than fix it. It's need
seems to have passed in the 2.03 ficl update.
Differential Revision: https://reviews.freebsd.org/D8150
replaced by /boot/loader.rc for 3.1 (r42682). In May 2000, this was
documented as deprecated (r61942) (between FreeBSD 4.0 and
4.1). Remove it since it's not been the preferred method in 17 years
and has been deprecated for 16.
Differential Revision: https://reviews.freebsd.org/D8142
dev_net.c code.
The NETIF_OPEN_CLOSE_ONCE flag was added in r201932 to prevent that behaviour
on some architectures (sparc64 and powerpc64) the default was left to always
open and close the device for each open and close of a file by the loader
because it was necessary for u-boot on arm.
Since it has been added, the flag was turned on for every arches including the
u-boot loader for arm.
This also fixes netbooting on RPi3 (tested by gonzo@)
For the loader.efi it greatly speeds up netbooting
Reviewed by: emaste, gonzo, tsoome
Approved by: gonzo
MFC after: 1 month
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D8230
R_AARCH64_RELATIVE relocation found on arm64. It would try to add the
contents of the memory location being relocated to the base address and
the relocation addend. This worked when the contents was zero, however
this now seems to be set to the value of the addend so we add this twice.
Fix this by just setting the memory to the computed value.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8177
The command interpreter does leave command_errmsg as is after printing its
content, assuming the next command will reset it in bf_command(). However,
in case the forth native word is defined as builtin, the bf_command is not
used and forth words will also end up the command_errmsg content printed.
Since command_errmsg is pointer to actual error message, which can be static
read only string, we can not just set *command_errmsg = '\0', instead we need
to reset the pointer itself.
Illumos issue: https://www.illumos.org/issues/7405
Reported by: Igor Kozhukhov.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8032
