The OpenCores I2C IP core can be found on any bus. Split out the PCI
bus specifics into their own file, only compiled on systems with PCI.
Reviewed by: kp
Sponsored by: Axiado
The SiFive FU540 Power Reset Clocking Interrupt block contains a PLL
that turns the input crystal (33.3MHz) into a 1-1.5GHz clock.
This clock in turn is divided by two to produce the tlclk, which is fed
into devices such as the SPI and I2C controllers.
Register a new clock device for the PRCI so that those devices can
read the correct clock through the clk framework.
Submitted by: kp
Sponsored by: Axiado
In r268055, powerpc64 was special cased regarding linker sets to not mark
the function pointer as 'const'.
This appears to have been done to ensure the compiler generates the function
descriptors correctly. When non-const, the function descriptors will end up
in the .data.rel.local section, and the linker set symbols will get
relocations pointing to them there.
Since function pointers on ELFv2 are "just" pointers like other platforms,
we can leave them const like they are on every other platform.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22796
We by definition cannot trace the stack of such a thread. Also remove a
redundant stack_zero() call in the SIGINFO handler, the stack structure
is cleared by the MD stack_capture().
Sponsored by: The FreeBSD Foundation
compilation error because, without _KERNEL defined, the macro
TMPFS_VALIDATE_DIR is invoked, but never defined. User-level software
that includes sys/tmpfs.h must define _KERNEL to make the definition
of TMPFS_VALIDATE_DIR visible.
This change puts all the inline functions that, directly or
indirectly, invoke MPASS into the scope of the _KERNEL block, allowing
many user-space includers of <sys/tmpfs.h> to stop defining _KERNEL.
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22874
On arm64 the eret instruction is used to return from an exception handler.
Some implementations may speculate past this instruction into the next
function. As the user may control many registers in these functions add
a synchronisation barrier sequence after the eret instruction to stop these
CPUs from speculating out of the exception handler.
PR: 242676
Submitted by: Anthony Steinhauser <asteinhauser@google.com> (previous version)
MFC after: 1 week
libmagic only depend on mkmagic if not DIRDEPS_BUILD
libpmc fix -I for libpmcstat
local.dirdeps.mk be even more careful about adding gnu/lib/csu to DIRDEPS
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D22872
First reported against ESXi 5.0, PCI passthrough was not working due to
MSI-X issues. However, this issue was fixed via patch releases against
ESXi 5.5 and 6.0 in 2016. Given ESXi 5.5 and earlier have been EOL, this
patch removes the VMware MSI-X blacklist entries in the quirk table.
PR: 203874
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: VMware
Differential Revision: https://reviews.freebsd.org/D22819
The code in questions walks IPv6 tree every 60 seconds and looks into
the routes with non-zero expiration time (typically, redirected routes).
For each such route it sets RTF_PROBEMTU flag at the expiration time.
No other part of the kernel checks for RTF_PROBEMTU flag.
RTF_PROBEMTU was defined 21 years ago, 30 Jun 1999, as RTF_PROTO1.
RTF_PROTO1 is a de-facto standard indication of a route installed
by a routing daemon for a last decade.
Reviewed by: bz, ae
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22865
The phy name may apparently be followed by a number in some systems.
Allow that.
PR: 242654
Reported and tested by: Marcel <marcel@brickporch.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Missing validation meant that it was possible to read 8 bytes beyond
the end of sfp_vpd_dump_buffer.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed by: delphij, ram
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22859
I was unable to find time when those were working. I think they have been
broken for at least 5 years or even longer.
Discussed with: avg@
MFC after: 1 month
incrementing (and decrementing) the ref_count on kernel page table pages.
They should not do this. Kernel page table pages are expected to have a
fixed ref_count. Address this problem by refactoring pmap_alloc{_l2,pde}()
and their callers. This also eliminates some duplicated code from the
callers.
Correctly implement PMAP_ENTER_NOREPLACE in pmap_enter_{l2,pde}() on kernel
mappings.
Reduce code duplication by defining a function, pmap_abort_ptp(), for
handling a common error case.
Handle a possible page table page leak in pmap_copy(). Suppose that we are
determining whether to copy a superpage mapping. If we abort because there
is already a mapping in the destination pmap at the current address, then
simply decrementing the page table page's ref_count is correct, because the
page table page must have a ref_count > 1. However, if we abort because we
failed to allocate a PV entry, this might be a just allocated page table
page that has a ref_count = 1, so we should call pmap_abort_ptp().
Simplify error handling in pmap_enter_quick_locked().
Reviewed by: kib, markj (an earlier)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22763
g_io_speedup waits for the completion of the speedup request before proceeding
using biowait(), but check_clear_deps is called with the softdeps lock held
(which is non-sleepable). It's safe to drop this lock around the call to
speedup, so do that.
Submitted by: Peter Holm
Reviewed by: kib@
IPv4 and IPv6.
This fixes a regression issue after r349369. When trying to exit a
multicast group before closing the socket, a multicast leave packet
should be sent.
Differential Revision: https://reviews.freebsd.org/D22848
PR: 242677
Reviewed by: bz (network)
Tested by: Aleksandr Fedorov <aleksandr.fedorov@itglobal.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
While a given ACPI device may have 0-N compatibility IDs, in practice most
seem to have 0 or 1. If one is present, emit it as part of the PNP info
string associated with a device. This could enable MODULE_PNP_INFO-based
automatic kldload for ACPI drivers associated with a given _CID (but without
a good _HID or _UID identifier).
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D22846
I've opted for just duplicating the two entries needed for this, rather than
writing any other mechanism for maintaining two root compat entries to map
to one config, for simplicity. We'll eventually declare these legacy DTB
unsupported, but let's not do that yet while there's no real burden.
While here, add RFC numbers to comments about nonce and AAD data
for TLS 1.2.
Reviewed by: gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22801
We use armv7/GENERIC for the RPI2 images. The original RPI2 is actually a
32-bit BCM2836, but v1.2 was upgraded to the 64-bit BCM2837. The project
continues to provide the RPI2 image as armv7, as it's the lowest common
denominator of the two. Historically, we've just kind of implicitly
acknowledged this by including some bcm2837 bits on a SOC_BCM2836 kernel
config -- this worked until r354875 added code that actually cared.
Acknowledge formally that BCM2837 is valid in arm32.
This name is inconsistent with the other BCM* SOC on !arm64 for two reasons:
1. It's a pre-existing option on arm64, and
2. the naming convention on arm/ should've arguably changed to include BRCM
#1 seems to be a convincing enough argument to maintain the existing name
for it.
There are probably bits that are still wrong, but this fixes some
things at least:
- Add named arguments to the functions in crypto(9).
- Add missing algorithms.
- Don't mention arguments that don't exist in crypto_register.
- Add CIOGSESSION2.
- Remove CIOCNFSESSION.
- Clarify some stale language that assumed an fd had only one sesson.
- Note that you have to use CRIOGET and add a note in BUGS lamenting
that one has to use CRIOGET.
- Various other cleanups.
Reviewed by: cem (earlier version)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D22784
While it works on nda, it fails on ada and/or da for at least zfs with a modify
after free issue on a trim BIO. Revert while I rework it to fix those devices.
SIOCGAIRONET allows userspace to query an(4) for various device
properties and configuration, which appears to potentially include
sensitive information such as WEP keys (an(4) seems to predate WPA).
Also avoid races by copying in the request structure to a temporary
buffer before locking and modifying the device softc.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
gets both rack and bbr ready for the completion of the STATs
framework in FreeBSD. For now if you don't have both NF_stats and
stats on it disables them. As soon as the rest of the stats framework
lands we can remove that restriction and then just uses stats when
defined.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D22479
It used to be required that a device be a child of gpiobus(4) to manipulate
gpio pins. That requirement didn't work well for FDT-based systems with many
cross-hierarchy users of gpio, so a more modern framework was created that
removed the old hierarchy requirement.
These changes adapt the owc_gpiobus driver to use the newer gpio_pin_*
functions to acquire, release, and manipulate gpio pins. This allows a
single driver to work for both hinted-attachment and fdt-based systems, and
removes the requirement that any one-wire fdt nodes must appear at the root
of the devicetree.
Differential Revision: https://reviews.freebsd.org/D22710
The maxpin counter starts at 0, fix one by one error.
This is still not totally correct for some banks in some SoC that have
fewer pins but this will be dealt with in another commit.
MFC after: 3 days
r351187 change the SYSCON_WRITE to SYSCON_MODIFY but didn't changed the
mask variable that used to hold the bitmask in the upper 16 bits of the
register that control which bits are changed. So we ended up clearing
bit from the upper 16bits half which are always 0 after a read.
Use the correct bit mask for bits that we want to clear.
MFC after: 3 days
From UEFI specification 2.8, page 434:
"It should also be noted that certain input devices may not be able to produce
shift or toggle state information, and in those cases the high order bit in
the respective Toggle and Shift state fields should not be active."
But we still need to check for ScanCode and UnicodeChar.
PR: 242660
Reported by: Trond Endrestol
MFC after: 1 week
Nothing modifies these things, but const'ify out of an abundance of caution.
If we could const'ify the definition in each keyboard driver, I likely
would- improper mutations here can lead to misbehavior or slightly more
annoying to debug state.
