last time. I should have pulled these in last time as it allows easier
comparison of "where we are at" relative to the current version from
cyclic.com. Since this is in a 4.4BSD style tree layout, the changelogs
dont exactly match the file layout, but it's close enough.
-mprofiler-epilogue to support it and documented the option.
cc.1:
Listed all the machine-dependent options, even the temporary
debugging ones.
invoke.texi:
Fixed the sense of -mno-ieee-fp.
Sorted the machine-dependent options.
Two uninitialised variables were causing a phkmalloc warning (another notch
in phkmalloc's belt) and caused the full rcstemplate to not be constructed
for commits on freefall.
(Note that you need to have either done a 'make world' or explicitly
run a 'make distrib-dirs' (in src/etc) to get some needed directories in
/usr/share/examples/cvs to be built.)
The code, as written, appears to load the new database data into a new
hash file and renames the two.
Due to a run of bugs and lack of error checking, it's going a whole
mess of unlink() and rename() calls that are failing. It only
worked in the first place because the data was being inserted into a
"live" hash file. (I wonder how much stale data has assumulated?)
Submitted by: Laurence Lopez <lopez@mv.mv.com>
plus a couple of minor changes..
Some highlights of the new stuff that was not in the old version:
- remote access support.. full checkout/commit/log/etc..
- much improved dead file support..
- speed improvements
- better $CVSROOT handling
- $Name$ support
- support for a "cvsadmin" group to cut down rampant use of "cvs admin -o"
- safer setuid/setgid support
- many bugs fixed.. :-)
- probably some new ones.. :-(
- more that I cannot remember offhand..
plus a couple of minor changes..
Some highlights of the new stuff that was not in the old version:
- remote access support.. full checkout/commit/log/etc..
- much improved dead file support..
- speed improvements
- better $CVSROOT handling
- $Name$ support
- support for a "cvsadmin" group to cut down rampant use of "cvs admin -o"
- safer setuid/setgid support
- many bugs fixed.. :-)
- probably some new ones.. :-(
- more that I cannot remember offhand..
plus a couple of minor changes..
Some highlights of the new stuff that was not in the old version:
- remote access support.. full checkout/commit/log/etc..
- much improved dead file support..
- speed improvements
- better $CVSROOT handling
- $Name$ support
- support for a "cvsadmin" group to cut down rampant use of "cvs admin -o"
- safer setuid/setgid support
- many bugs fixed.. :-)
- probably some new ones.. :-(
- more that I cannot remember offhand..
Changed beforeinstall rule to use `install -C' instead of `cmp -s'
and `install -c'. `install -C' has exactly the right semantics
for installing headers and should be used elsewhere.
vector. Now it is called the "symbol caching" vector. This was made
possible and unconfusing by other changes that allowed me to localize
everything having to do with the caching vector in the function
reloc_map().
Switched to alloca() for allocating the caching vector, and eliminated
the special mmap-based allocation routines. Although this was motivated
by performance reasons, it led to significant simplification of the
code, and made it possible to confine the symbol caching code to the
single function reloc_map().
Got rid of the unnecessary and inefficient division loop at the
beginning of rtld().
Reduced the number of calls to getenv("LD_LIBRARY_PATH") to just 1, on
suggestion from <davidg@root.com>.
Added breaks out of the relocation loops when the relocation address is
found to be 0. A relocation address of 0 is caused by an unused
relocation entry. Unused relocation entries are caused by linking a
shared object with the "-Bsymbolic" switch. The runtime linker itself
is linked that way, and the last 40% of its relocation entries are
unused. Thus, breaking out of the loop on the first such entry is a
performance win when ld.so relocates itself. As a side benefit, it
permits removing a test from md_relocate_simple() in
../i386/md-static-funcs.c.
Unused relocation entries in other shared objects (linked with
"-Bsymbolic") caused even bigger problems in previous versions of the
runtime linker. The runtime linker interpreted the unused entries as if
they were valid. That caused it to perform repeated relocations of the
first byte of the shared object. In order to do that, it had to remap
the text segment writable. Breaking out of the loop on the first unused
relocation entry solves that.
Submitted by: John Polstra <jdp@polstra.com>
them. Good greif! This was causing an unimaginable amount of brain-damage!
The mere fact that I griped about $ Log $ in a previous commit (misspelled
deliberately here) meant that the blasted thing was being expanded from the
middle of the log entry as well as the beginning, and using " * All these"
as the comment leader.. AARGH!!!! We *really* need to prevent these from
being expanded! (or remove the magic identifier from the source).
All those $Log$ entries, combined with the whitespace changes are a real
pain.
I'm committing this now, before it's completely finished to get it compiling
and working again ASAP. Some of the FreeBSD specific features are not working
in this commit yet (mainly rlog stuff and $FreeBSD$ support)
This is going to be pretty messy.... Although the vendor import was correct,
both the vendor and release tags are the same "gnu"... :-/
Getting cvs to choose the correct one might be rather interesting...
Note, this is going to be messy.. 2.3 was vendor-branch imported, while
2.6 was done as a delta. Sigh. I'm importing this on a vendor branch so
that it will be easier to deal with next time..
(cvs-1.6 wants rcs-5.7, and rcs-5.7 suggests diffutils-2.7)
Implemented symbol memorizing to reduce the number of calls to lookup(),
making relocation go faster. While relocating a given shared object,
the dynamic linker maintains a memorizing vector that is directly
indexed by the symbol number in the relocation entry. The first time a
given symbol is looked up, the memorizing vector is filled in with a
pointer to the symbol table entry, and a pointer to the so_map of the
shared object in which the symbol was defined. On subsequent uses of
the same symbol, that information is retrieved directly from the
memorizing vector, without calling lookup() again.
A symbol that is referenced in a relocation entry is typically
referenced in many relocation entries, so this memorizing reduces the
number of calls to lookup() dramatically. The overall improvement in
the speed of dynamic linking is also dramatic -- as much as a factor of
three for programs that use many shared libaries.
Submitted by: jdp@polstra.com "John Polstra"
bsd.man.mk when I change the latter to use `::' instead of `:'
dependencies. (bsd.man.mk is included because NOMAN isn't defined.
The maninstall target is supposed to be private to bsd.man.mk so
bsd.man.mk doesn't bother testing if it is already defined. The
test for redefinition in Makefile.dev was too early to do anything.)
Change install target to a beforeinstall target (perhaps there should
be an `extrainstall' target so that Makefiles don't have to abuse
one of beforeinstall, install, realinstall or afterinstall). Don't
bother testing for the install target already being defined. Rewrite
the shell loop as a make loop (this reduces the time for installing
groff from 78s to 65s here).
include this in the old makefiles.
I intended to fix only the private maninstall rule but found a lot of
other bogons and bugs:
- strong resistance to installing the program anywhere other than
${DESTDIR}/usr/bin (first, ../../Makefile.inc was not included.
../Makefile/inc was redundantly included instead. Second, /usr/bin
was hard coded).
- the owner, group and permissions were hard coded.
- the man page was installed twice.
- MANDEPEND wasn't necessary.
- calculations to determine the obj directory weren't necessary.
- there were unnecessary private rules for depend, rcsfreeze and tags.
We don't support the rcsfreeze target.
- there was an extra, bogus, rule for `all'.
The final version uses suffix rules to eliminate the remaining verboseness
involving directories (${.CURDIR}) and to potentially allow multiple
shell programs in one directory.
We already check for (and reject entries with) '+' or '-' as the first
character of the key side of the key/data pair; we should check the data
side too. (Letting spurious +/- entries into the NIS maps is bad karma.)
I got tired of see ``UNIX System Managers Manual''
NOTE: There still a couple of UNIXs left in here. There deal with the
documents. We may want to change there also, even though VERY little of there
even pertain to FreeBSD.
instead of the uninitialized one $(DEVICE).
I hoped these changes would fix some of the large runtime macro processing
bugs, but they seem to only fix some small build-time macro substitution
bugs. E.g., `man ms' now tells you to invoke groff with the flags `-ms'
instead of the bogus flags `-m'; `man groff now tells you that the default
device is `ps' instead of the bogus device `'.
shared library. Formerly, the message looked like this:
ld.so: run: libjdp1.so.1.0: Undefined error: 0
The new message looks like this:
ld.so: run: Can't find shared library "libjdp1.so.1.0"
(Where "run" is the name of the program being executed.)
Submitted by: jdp@polstra.com (John Polstra)
symbols.
An easy example to see this is to develop an X program which links
against Xt, but doesn't add -lX11 to the link line. It will link fine,
but cause run-time errors by ld.so because of missing symbols used by Xt
defined in X11. This patch makes the errors more readable.
Submitted by: jdp@polstra.com (John Polstra)
#ifdef out a number of calls to free() left over from the original
GNU ypserv implementation. As near as I can tell, the Berkeley DB
package does its own garbage collection, hence the caller doesn't
have to worry about free()ing the memory returned in the DBT
structures during lookups (I'm still not 1005 sure about this:
the DB code is very hard to follow. I must use dynamically
allocated memory since you can retreive arbitrarily large records
from a database, but I'm not sure where it ends up letting go
of it). This was not true with GDBM; you had
to do your own garbage collection.
The general rule is that if you allocate memory inside an RPC
service routine, you have to free() it the next time the routine is
called since the underlying XDR routines won't do it for you.
But if the DB package does this itself, then we don't need to do
it in the main program.
Note that with the original malloc(), there were never any errors
flagged. phkmalloc complained quite loudly.
in the diff. This makes it so that diffs containing files in different
subdirectories that have the same name not patch the same file. For example
a diff with patches to Makefile, des/Makefile, usr.bin/Makefile would attempt
to patch Makefile three times.
"update -jHEAD" when a file has been added on the specified tag.
It doesn't actually make cvs 'handle' it, it just stops it from dying
and leaving stray locks and other wreckage.
This was suggested by the CVS maintainers, and is in cvs-1.5.1-950901.
1: It stops invalid files being created in the cvs tree
2: It stops the import from aborting without mailing a commit message..
The first is simple, it opens the file for reading before touching the
repository, and the second catches the pieces when it hits an unreadable
file rather than just aborting mid-way through, leaving the repository in
a bit mess.
Reviewed by: rgrimes
specified in the top level Makefiles.
Previously I missed dozens of Makefiles that skip the install after
using `cmp -s' to decide that the install isn't necessary.
LINK_SPEC. This solves a problem with the f77 frontend where
aproviding the -r8 option (use REAL*8) caused `cc' to ``forget'' to
pass the entry point to the linker.
Closes PR #gnu/644: f77 -r8
Reviewed by: watanabe@komadori.earth.s.kobe-u.ac.jp (Takeshi WATANABE)
In ypserv:
yp_svc.c:
- small signal handler tweak (hopefully the last): just use sigemptyset()
to clear sa_mask.
Makefile.yp:
- Let the user specify the location of master.passwd when updating
maps (e.g. make MASTER_PASSWD=/some/path/to/master.passwd). Editing
the file to change the location of master.passwd still works. This
is mostly to let yppassswdd specify the name of the master.passwd
file itself.
In yppasswdd:
yppasswdd.c:
- Roll in some minor changes (mostly casts) from Olaf Kirch's latest
yppasswd package release (version 0.7).
- Use daemon() instead of doing all the deamonizing gruntwork ourselves.
- Call pw_init() after daemonizing ourselves. pw_init() sets up some
resource limits and blocks some signals for us. We used to do this before
every password change, but there's really no point in calling it more
than once during the life of the program.
- Change install_reaper() so that we can use it to de-install the SIGCHLD
handler if we need to (and we do in pw_mkdb() -- this is what I get for
splicing code from two different programs together).
- Use sigemptyset(&act.sa_mask) rather than act.sa_mask = 0: the latter is
decidedly non-portable. (In IRIX, HP-UX and Solaris, sigset_t is an
array of longs, not an int.)
update.c:
- Roll in change from new version (check that we're not modifying an NIS
entry in validate_args()).
- Get rid of call to pw_init() (moved to yppasswdd.c).
- Check return values from pw_util routines and return error status to
yppasswd clients if there's a problem.
- Straighten out password file copying mechanism a little. Keep a grip
on the original password file rather than summarily overwriting it so
that we can restore everything if we fail to fork() a process to update
the NIS maps.
- Pass the name of the password template file (specified with -m or
/etc/master.passwd by default) to the yppwupdate script, which in
turn should now pass it to /var/yp/Makefile.
pw_util.c:
- Nuke the pw_edit() and pw_prompt() functions -- we don't need them.
- Change all warn()s, warnx()s and err()s to syslog()s.
- Make sure we return error status to caller rather than bailing out
in pw_lock() and pw_tmp().
- Don't block SIGTERM in pw_init() (by ignoring SIGTERM, we prevent
yppasswdd from being shut down cleanly).
- Don't let pw_error() exit. (This stuff was stolen from chpass and vipw
which are interactive programs; it's okay to let pw_error() bail out
for these programs, but not in a daemon like yppasswdd).
- Fix signal handling in pw_mkdb (we need to temporarily de-install the
SIGCHLD handler so that we can wait on the pwd_mkdb child ourselves).
pw_copy.c:
- Change all warn()s, warnx()s and err()s to syslog()s.
- Add a bunch of returns() and make pw_copy() return and int ( 0 on success,
-1 on failure) so that update.c can flag errors properly.
- Return -1 after calling pw_error() to signal failures rather than
relying on pw_error() to bail out.
- Abort copying if we discover that we've been asked to change an entry
for a user that exists in the NIS passwd maps but not in the master.passwd
template file. This can happen if the passwd maps and the template file
fall out of sync with each other (or if somebody tries to spoof
us). The old behavior was to create add the entry to the password file,
which yppasswdd should not do under any circumstances.
Makefile:
- update VERSION to 0.7
yppasswdd.8:
- fix typo (forgot a carriage return somewhere)
- remove bogus reference to pwunconv(8) which FreeBSD doesn't have.
- bump version from 0.5 to 0.7
- Reflect changes in password file handling.
yppwupdate:
- Log map rebuilds to /var/yp/ypupdate.log.
- Pass the name of the template password file to /var/yp/Makefile as
$MASTER_PASSWD.
syslog connections unless they were rejected. This helps save wear and
tear on the syslog facility in large networks with many clienst systems.
yp_svc.c: Be a little smarter about using sigaction() -- set the SA_RESTART
flag.
svc_run: Be doubly paranoid about killing off child processes. Do a flag
chack and a pid check before letting child 'threads' self-destruct.
- There are two cases where the server can potentially block for a long
time while servicing a request: when handling a yp_all() request, which
could take a while to complete if the map being transfered is large
(e.g. 'ypcat passwd' where passwd.byname has 10,000 entries in it),
and while doing DNS lookups when in SunOS compat mode (with the -dns
flag), since some DNS lookups can take a long time to complete. While
ypserv is blocked, other clients making requests to the server will
also block. To fix this, we fork() ypall and DNS lookups into subprocesses
and let the parent ypserv process go on servicing other incoming
requests.
We place a cap on the number of simultaneous processes that ypserv can
fork (set at 20 for now) and go back to 'linear mode' if it hits the
limit (which just means it won't fork() anymore until the number of
simultaneous processes drops under 20 again). The cap does not apply
to fork()s done as a result of ypxfr calls, since we want to do our
best to insure that map transfers from master servers succeed.
To make this work, we need our own special copy of svc_run() so that
we can properly terminate child processes once the RPC dispatch
functions have run.
(I have no idea what SunOS does in this situation. The only other
possibility I can think of is async socket I/O, but that seems
like a headache and a half to implement.)
- Do the politically correct thing and use sigaction() instead of
signal() to install the SIGCHLD handler and to ignore SIGPIPEs.
- Doing a yp_all() is sometimes slow due to the way read_database() is
implemented. This is turn is due to a certain deficiency in the DB
hash method: the R_CURSOR flag doesn't work, which means that when
handed a key and asked to return the key/data pair for the _next_
key in the map, we have to reset the DB pointer to the start of the
database, step through until we find the requested key, step one
space ahead to the _next_ key, and then use that. (The original ypserv
code used GDBM has a function called gdbm_nextkey() that does
this for you.) This can get really slow for large maps. However,
when doing a ypall, it seems that all database access are sequential,
so we can forgo the first step (the 'search the database until we find
the key') since the database should remain open and the cursor
should be positioned at the right place until the yp_all() call
finishes. We can't make this assumption for arbitrary yp_first()s
and yp_next()s however (since we may have requests from several clients
for different maps all arriving at different times) so those we have
to handle the old way.
(This would be much easier if R_CURSOR really worked. Maybe I should
be using something other than the hash method.)
Fix the use of /usr/X386 to ${X11BASE}. Fix the pathname /usr/bin/chess
to /usr/games/chess.
XCircle.c:
Fix the comment after an ifdef to make it a real comment to silent gcc.
std.h:
Comment out a private definition of sys_errlist.
texinfo-3.6 distribution to enable the use of the cursor keys.
Since there is an open problem report (gnu/289) for this it might be
of interest for (some of) you.
I (Joerg) have also added a minor hack that makes info recognizing a
window size change while it has been suspended.
Submitted by: thomas@ghpc8.ihf.rwth-aachen.de (Thomas Gellekum)
constructors and destructors.
Add -lgcc_pic to LDADD for the shared library since C++ code uses stuff from
libgcc and we no longer have a shared libgcc. Should this be done by
CPLUSPLUSLIB?
platform, I discovered the following: if you use ypcat (or anything that
does a yp_all() for that matter) to dump out a map and then hit ^C before
it finishes, ypserv gets hit with a SIGPIPE and dies. (The ypall() service
is implemented using TCP.)
Fix: ignore SIGPIPEs.
bootparam_prot.x was changed for nfsv3 but bootparamd and callbootd
kept using the old version which fortunately failed at build time.
Copying hasn't been necessary since path handling was fixed in
rpcgen/rpc_main.c some time ago.
- Use one sprintf() to put together the path to the map database instead
of strcat()s and strcpy()s.
- Make the 'error opening database' Perror() statement sane.
on dlclose. Also correctly call constructors and destructors for libraries
linked with /usr/lib/c++rt0.o.
Change interpretation of dlopen manpage to call _init() rather than init()
for dlopened objects.
Change c++rt0.o to avoid using atexit to call destructors, allowing dlclose to
call destructors when an object is unloaded.
Change interface between crt0 and ld.so to allow crt0 to call a function on
exit to call destructors for shared libraries explicitly.
These changes are backwards compatible. Old binaries will work with the new
ld.so and new binaries will work with the old ld.so. A version number has
been introduced in the crt0-ld.so interface to allow for future changes.
Reviewed by: GAWollman, Craig Struble <cstruble@singularity.bevc.blacksburg.va.us>
cpio/copyout.c:
Don't output a file if the major, minor or totality of its rdev would be
truncated. Print a message about the skipped files to stderr but don't
report the error in the exit status. cpio's abysmal error handling doesn't
allow continuing after an error, and the rdev checks had to be misplaced
to avoid the problem of returning an error code from routines that return
void.
pax/pax.h:
Use the system macros for major(), minor() and makedev().
pax already checks _all_ output conversions for overflow. This has the
undesirable effect that failure to convert relatively useless fields
such as st_dev for regular files causes files not to be output. pax
doesn't report exactly which fields couldn't be converted.
tar/create.c:
Don't output a file if the major or minor its rdev would be truncated.
Print a message about the skipped files to stderr and report the error
in the exit status.
tar/tar.c:
For not immediately fatal errors, exit with status 1, not the error count
(mod 256).
All:
Minor numbers are limited to 21 bits in pax's ustar format and to 18
bits in archives created by gnu tar (gnu tar wastes 3 bits for padding).
pax's and cpio's ustar format is incompatible with gnu tar's ustar
format for other reasons (see cpio/README).
now safely add a line like
ldconfig -m ${PREFIX}/lib
in ports' Makefiles and packing lists without throwing away some
directories the user may have added.
Submitted by: Mostly by Paul Kranenburg <pk@cs.few.eur.nl>
Add a NOMAN= . It doesn't have a manual page yet.
Please don't cry :-). I ask Rod first. the whole isdn subdir is not
used in the moment and is only dead source code in the tree.
In the case where ypserv is started with the -dns flag, fall through to
the DNS lookup code only if asked to match a map with the word 'host'
in its name. This prevents failed matches on non-host maps from being
incorrectly handed off to DNS.
>Number: 364
>Category: bin
>Synopsis: Interrupting man results in half-baked man page
>Description:
Interrupting man while it is waiting for the page to be formatted
results in a zero length file or a half-baked file.
>How-To-Repeat:
Inetrrupt man while it is formatting a page.
>Fix:
Pay more attention to the return value from the system command.
Submitted by: John Capo <jc@irbs.com>
examination, I'm not entirely sure this was meant to be public. It's not
idempotent or anything. I'll make pkg_manage deal with it another way
until it's been confirmed one way or the other by Marc.
like "3DBorder" and "[". (NB, the "3DBorder" problem has actually
been intention, it allowed for weird section names like "3xyzzy". We
don't have them, either.)
(Partially) Submitted by: taob@gate.sinica.edu.tw (Brian Tao)
file specifications when they've been extracted (enabling you to get a file
fast if it occurs somewhere close to the front).
Submitted by: Marc van Kempen <wmbfmk@urc.tue.nl>
> * the gdb-4.13 of current (compiled and used under 2.0R) can not attach to my
> own processes (it works only then i'm root - else i get open failed - for my
> own processes)
how embarassing ! This turns out to be a bug in infptrace.c. Below
is a patch. Could some kind soul apply it ?
Submitted by: "Gary J." <garyj@rks32.pcs.dec.com>
of the linker to enforce linking of modules in command line order it is
not possible to link gdb shared with -lcompat.
*HACK ALERT*
Removed -lcompat from LDADD and bring in the necessary functions out of
libcompat as a source module until the linker can be fixed.
underlying bugs which are caused by mixing static/shared libraries with
this change in place.
The shlib code is not capable of supporting this feature in it's present
state and will need significant modifications in order to do so.
register ourselves as an NIS version 1 UDP server to pacify older SunOS 4
ypbinds that seem to insist on having one around. All this does is allow
ypserv to respond to DOMAIN_NONACK requests that are periodically
transmitted by ypbind: the server will not actually work as an NIS v1
server in any other way.
Unlike the mainline code, which implements this as a compile-time
option, this feature can be turned on with the newly-added -k flag
at runtime.
Bunped version number to 0.13. (What the hell.)
Updated the man page to reflect this change, also made a couple of small
edits to reflect the recent changes in the /etc/rc* setup.
ypxfr can't easily be reduced down to one file like yppush because it
needs to do certain special things (such as binding to a specific
machine (the NIS master)) which the yp_*() functions in libc don't
allow.
in libc, we can get rid of the private/special copies of yp_*.c
files and rpcgen them at compile time instead. This leaves us with
just one unique source files: yppush.c
date: 1995/02/04 20:27:23; author: phk; state: Exp; lines: +1 -1
added *.info and *.db to the default "ignore" list in cvs to avoid obviously
common mistakes.
that ypxfr is supposed to log messages to /var/yp/ypxfr.log if it exists,
using syslog() makes more sense, especially since ypserv does the same
thing already. Try to use stderr by default, and use syslog() if stderr
is not a tty.
Also update the man page to reflect this change.
NIS maps (get rid of extraneous slash a la /var/yp//domainname).
Have ypxfr log all output to /var/yp/ypxfr.log if stdin is not a
tty. This should allow logging to be done when ypxfr is called from
inside ypserv in response to a yppush request.
Update man page to reflect the change (and fix a typo).
use it. :-)
It now explicitly requires the specification of a directory to import
from, either as an argument to the script, or by asking the user about
it. (Previously, it implicitly used `.', like cvs import does.)
Also implemented an option `-n', which does essentially the same like
the overall CVS option `-n': show only what would have been done,
don't do any commitment. Note that since the modules' database is
checked out in place (and not commited back), it will erroneously be
reported as to be imported, too:
cvs import: Importing /home/ncvs/ports/foobar/foo/modules
I ports/foobar/foo/modules/CVS
N ports/foobar/foo/modules/modules
This is an unwanted side-effect, but gives the user the option to see
if the `ed' magic did the right thing when editing modules/modules.
Rod, can you please check the function ``checktag'' in the script if it
will be restritctive enough?
interpret it. I've preserved the bugs that perl must be installed
to build part of perl and that it must be installed in the wrong place
(no ${DESTDIR}).
members over shared library members. This modification causes the linker
to use the first definition it sees for a symbol instead of having
priorities based on the library type. This modification should allow
gdb to compile again.
Obtained from:
Email conversation with Paul Kranenbury, but implemented completely by
me. If it doesn't work, it's my fault not his.
Remove private mkdir command for /usr/include/g++, this is now
handled by mtree.
Make the whole file fit in 80 column output, sort the SRCS list and
split into .c and .cc sources.
Use $Id$ instead of $FreeBSD$ since we pulled support for this.
Add DPADD to match LDADD and now include <bsd.prog.mk> to define
the DPADD values (This is a hack until the .mk stuff can be corrected
so that ${LIB*} is visiable in bsd.lib.mk.)
Optimize beforeinstall target by eliminating a subshell.
