Commit Graph

10804 Commits

Author SHA1 Message Date
wpaul
cad1573762 Implement support for single packet sends. The Intel Centrino driver
that Asus provides on its CDs has both a MiniportSend() routine
and a MiniportSendPackets() function. The Microsoft NDIS docs say
that if a driver has both, only the MiniportSendPackets() routine
will be used. Although I think I implemented the support correctly,
calling the MiniportSend() routine seems to result in no packets going
out on the air, even though no error status is returned. The
MiniportSendPackets() function does work though, so at least in
this case it doesn't matter.

In if_ndis.c:ndis_getstate_80211(), if ndis_get_assoc() returns
an error, don't bother trying to obtain any other state since the
calls may fail, or worse cause the underlying driver to crash.

(The above two changes make the Asus-supplied Centrino work.)

Also, when calling the OID_802_11_CONFIGURATION OID, remember
to initialize the structure lengths correctly.

In subr_ndis.c:ndis_open_file(), set the current working directory
to rootvnode if we're in a thread that doesn't have a current
working directory set.
2004-02-03 07:39:23 +00:00
njl
8ec8ff7672 Notify the user (at kern.emerg) that the system will be shutting down if
it is still above the critical temperature on the next poll cycle.  This
is a 10 second advance notice by default.  Document the private
(non-standard) notify we will be using with devd(8).
2004-02-03 04:18:56 +00:00
njl
38fffd503d If the temperature is at _HOT or _CRT for 3 sequential readings, shutdown
the system.  Also, decrease the poll interval to 10 seconds from 30
seconds.  This is needed because some systems will report an invalid high
temperature for one poll cycle.  It is suspected this is due to the
embedded controller timing out.  A typical value is 138C for one cycle on a
system that is otherwise 65C.  This prevents the system from prematurely
shutting down after one invalid reading.  It will still shut down after 30
seconds of high temperature, which is the same as previous default
behavior.

Tested by:	Scott Lambert <lambert AT lambertfam.org>
2004-02-02 18:03:35 +00:00
phk
16b5363af4 Add CRD_F_KEY_EXPLICIT which allows the key to be changed per
operation, just like it was possible to change the IV.

Currently supported on Hifn and software engines only.

Approved by:	sam@
2004-02-02 17:06:34 +00:00
sos
88dbe90498 Move the enabling of interrupt back to where it was some time ago.
This apparently was what broke the boot with some devices (liteon).
2004-02-02 15:49:01 +00:00
sanpei
e0fb2a93eb MFNetBSD: URL updates(rev.1.108) 2004-02-02 15:00:15 +00:00
sos
7d8abef95b Fix support for the Promise TX4 on amd64.
Somehow the bridge on there shows up with another PCI id than
it does on x86, no idea why...
2004-02-02 14:05:57 +00:00
grehan
11851979c2 Add new Apple GEM PCI id. 2004-02-02 01:11:39 +00:00
wpaul
1fc97b3c26 Use the OID_802_11_CONFIGURATION OID when deciding if the underlying driver
is for an 802.11 device or not. At least one driver I have does not
support the OID_802_11_NETWORK_TYPES_SUPPORTED OID.

Also, for now, don't do anything special in the ndis_suspend() method.
I originally wanted to shut down the NIC but leave the IFF_UP flag alone
since technically the interface is meant to remain up, but an interrupt
may be delivered to the ISR on suspend, and if this happens while the
NIC is halted, we will crash, since none of the miniport driver methods
will function.

This needs to be dealt with properly later, but for now this prevents
a panic, and the resume method properly re-inits the NIC.
2004-02-01 21:35:15 +00:00
imp
74d898f209 Add the Canon N1240U to the mix. It appears to be similar to the
1220U and supported by sane

# someone should update the man page to include all the devices that
# uscanner supports.
2004-01-31 18:12:18 +00:00
sos
d6d611fb17 Be more robust in the probe. We dont want to get into a loop with
reinitting when we try to identify devices. If they dont interrupt
on identify we retry once. If this fails we simply ignore that device.
2004-01-30 19:16:08 +00:00
simokawa
d7d8341eff Add NEC uPD72873.
Submitted by: Christian Laursen <xi@borderworlds.dk>
2004-01-30 14:30:19 +00:00
simokawa
afad89848f Use device_identify and bus_add_child methods to add a firewire
bus on fwohci. This should fix attach failure caused by a race
between firewire and fwochi initialization for the kernel module.
2004-01-30 14:28:11 +00:00
scottl
5dfe9e26ea Take the plunge and make this driver be INTR_FAST. This re-arranges the
interrupt handler so that no locks are needed, and schedules the
command completion routine with a taskqueue_fast.  This also corrects the
locking in the command thread and removes the need for operation flags.

Simple load tests show that this is now considerably faster than FreeBSD 4.x
in the SMP case when multiple i/o tasks are running.
2004-01-30 07:04:39 +00:00
sos
85f33cbeb4 Cleanups/cosmetics. 2004-01-29 15:03:01 +00:00
mr
f2e284bf9e Add dependency to snd_via8233 2004-01-29 14:11:03 +00:00
mjacob
f84d608146 Fix a bug where we never managed to include the sense data we wanted to send. 2004-01-29 06:36:30 +00:00
wpaul
547b42ac2e Go back to using AUTHMODE_AUTO if WEP is on. In some cases, the Centrino
won't associate in BSS mode if you use AUTHMODE_SHARED. I probably don't
understand enough to know when SHARED should be used vs. OPEN or WPA.
For now, go back to what works.
2004-01-29 03:16:58 +00:00
mjacob
0de77ec260 Fix longstanding buglet- for centrally handled CTIO2s we were checking the wrong
bit for this being the  last CTIO2.  It didn't matter since it really was the
last CTIO2 and the resources recycled, but still....

Add in CTIO3 define for future DAC work.
2004-01-29 02:40:43 +00:00
sos
e2d757c7c1 Fix for those lost interrupts on probe on lots of controller types.
Note to self, just because an idea is good, it doesn't apply everywhere.
2004-01-28 21:54:40 +00:00
sos
3678d31f17 Use the biotask functionality in GEOM to put finished requests on
instead of taskqueue_swi. This shaves from 1 to 10% of the overhead.

Overhaul the locking once more, there was a few possible races that
are now closed.
2004-01-28 20:38:51 +00:00
truckman
860115ff61 Change KASSERT() in feed_vchan16() into an explicit test and call to
panic() so that the buffer overflow just beyond this point is always
caught, even when the code is not compiled with INVARIANTS.

Change chn_setblocksize() buffer reallocation code to attempt to avoid
the feed_vchan16() buffer overflow by attempting to always keep the
bufsoft buffer at least as large as the bufhard buffer.

Print a diagnositic message
	Danger! %s bufsoft size increasing from %d to %d after CHANNEL_SETBLOCKSIZE()
if our best attempts fail.  If feed_vchan16() were to be called by
the interrupt handler while locks are dropped in chn_setblocksize()
to increase the size bufsoft to match the size of bufhard, the panic()
code in feed_vchan16() will be triggered.  If the diagnostic message
is printed, it is a warning that a panic is possible if the system
were to see events in an "unlucky" order.

Change the locking code to avoid the need for MTX_RECURSIVE mutexes.

Add the MTX_DUPOK option to the channel mutexes and change the locking
sequence to always lock the parent channel before its children to avoid
the possibility of deadlock.

Actually implement locking assertions for the channel mutexes and fix
the problems found by the resulting assertion violations.

Clean up the locking code in dsp_ioctl().

Allocate the channel buffers using the malloc() M_WAITOK option instead
of M_NOWAIT so that buffer allocation won't fail.  Drop locks across
the malloc() calls.

Add/modify KASSERTS() in attempt to detect problems early.

Abuse layering by adding a pointer to the snd_dbuf structure that points
back to the pcm_channel that owns it.  This allows sndbuf_resize() to do
proper locking without having to change the its API, which is used by
the hardware drivers.

Don't dereference a NULL pointer when setting hw.snd.maxautovchans
if a hardware driver is not loaded.  Noticed by Ryan Sommers
<ryans at gamersimpact.com>.

Tested by:	Stefan Ehmann <shoesoft AT gmx.net>
Tested by:	matk (Mathew Kanner)
Tested by:	Gordon Bergling <gbergling AT 0xfce3.net>
2004-01-28 08:02:15 +00:00
roam
0004b4717f Add an ACPI_FUNCTION_TRACE() to the newly-added acpi_Startup() routine
to get the ACPI_DEBUG case (and LINT in particular) to build.

Reviewed by:	jhb, njl
Approved by:	jhb
2004-01-28 07:48:03 +00:00
des
58a1b901a4 While USB keyboards attach as ukbd[0-9]+, the device node created by
kbd_attach() is called kbd[0-9]+, with a different unit number.  This
makes it impossible to write a devd rule which will automatically
switch to a USB keyboard when one is attached, because there is no way
to guess the correct device node to pass to kbdcontrol.

Therefore, change kbd_attach() to create a device node using the
keyboard device's real name (atkbd0, ukbd0...), and create the
kbd[0-9]+ node as an alias for backward compatibility.
2004-01-27 15:40:30 +00:00
wpaul
0d9244785d This should have been checked in as part of the last update to if_ndis.c:
add yet another member to the ndis_softc as part of the workaround for
the net80211 dain bramage.
2004-01-27 09:08:12 +00:00
wpaul
cc4f21e732 Add a kludge to avoid having ndis_init() called needlessly by dhclient
on an SIOCSIFADDR (by way of brain damage in net80211).

Also, avoid trying to set NDIS_80211_AUTHMODE_AUTO since the Microsoft
documentation I have recommends not using it, and the Centrino driver
seems to dislike being told to use it.
2004-01-27 07:57:42 +00:00
njl
3e47387119 Add TUNABLE_STR to make "hw.acpi.os_name" more correct. However, the call
to getenv_string() still doesn't work.
2004-01-27 06:07:09 +00:00
wpaul
6d190d0786 Use the M_BZERO flag with malloc() in a couple of places. 2004-01-27 03:14:59 +00:00
jhb
217fb330c2 Move the code to initialize ACPI-CA into a separate acpi_Startup() function
that other modules can call to initialize ACPI-CA before the new-bus probe
and change acpi_identify() to call it.

Reviewed by:	njl
2004-01-26 19:29:04 +00:00
harti
eefcd12e91 Get rid of the last two uses of NG_NODELEN + 1 in the base system by
replacing them with NG_NODESIZ.
2004-01-26 16:41:21 +00:00
matk
507ddae3aa Fix a panic in dsp_clone when trying to access a sound
device that doesn't exists.  I'm using my discretion and
committing without mentor approval since Seigo is away.

Noticed by:	Maxime Henrion <mux@freebsd.org>
2004-01-25 22:46:22 +00:00
wpaul
983ec1a4d4 Correct KASSERT() in ndis_destroy(): ndis_mtx is a pointer now.
Also add KASSERT() for ndis_intrmtx().
2004-01-25 00:13:07 +00:00
sobomax
28bee9f635 Regen after rev. 1.161 of usbdevs. 2004-01-24 21:24:36 +00:00
sobomax
19842da546 Add support for Crystalfontz CFA-631 USB LCD (uftdi(4) driver).
For some very unclear reason this device contains a FTDI 8U232AM USB->COM
adapter, but reports different device id than original 8U232AM. At the same
time, it reports vendor id of FTDI.

Sponsored by:	Porta Software Ltd
MFC after:	2 weeks
2004-01-24 21:23:12 +00:00
sanpei
76b78c430b Sync to 1.160 of usbdevs 2004-01-24 07:15:23 +00:00
sanpei
7a7b2ea977 Add Support
- 2nd type of GL641USB USB-IDE bridge	[1]
	- Plextor Plexwriter 40/12/40U		[2]

PR:		kern/61671	[1]
		kern/61803	[2]
Submitted by:	Ralf Wenk <RZ-FreeBSD0401@fh-karlsruhe.de>	[1]
		Feisal Mohammed <feisal@uwi.tt>			[2]
MFC after:	1 week
2004-01-24 07:14:07 +00:00
wpaul
e5e785e0d4 Add missing newlines to some device_printf()s.
Don't do anything in ndis_get_assoc() if the link isn't up (avoids
spurrious "couldn't get bssid" messages on the console).
2004-01-24 02:48:22 +00:00
mjacob
939fc514b7 If we have ISP_ROLE_INITIATOR set, make sure that we clear ICBOPT_INI_DISABLE
from the fwoptions. Likewise, we *set* ICBOPT_INI_DISABLE if we don't have
initiator role.
2004-01-23 23:23:31 +00:00
mjacob
b8527c05c4 add MAKE_WWN_FROM_NODE_NAME macro 2004-01-23 23:22:35 +00:00
mjacob
ec1bdb4850 Add firmware major, minor and micro revsions to the ISP_FC_GETHINFO ioctl
structure.
2004-01-23 23:22:11 +00:00
simokawa
21c2acb52a * fwohci_pci.c
Improve error message for attach failure.

* sbp_targ.c
	- Add speed in struct sbp_targ_login.
	- Remove unnecessary htonl().
2004-01-23 17:37:09 +00:00
matk
48d5bd2f8c Sync with DFBSD v.1.16. Add new codecs IDs, fix some spelling.
Approved by:    des (interim mentor)
2004-01-23 16:38:54 +00:00
sos
928e6e1d2c Fix breakage in PIO multisector support. 2004-01-23 10:38:56 +00:00
jhb
9f48959707 Fix the PCI attach routine to properly setup the IRQ and port resource
rid's and to deallocate resources if a failure occurs during attach.  This
patch also fixes the driver to return failure if bus_alloc_resource() for
the IRQ fails rather than panic'ing on the next line by passing a NULL
resource to bus_setup_intr().  The other attachments already do all this.

Submitted by:	Jun Su <csujun@263.net>
2004-01-22 16:07:03 +00:00
simokawa
9e559fd52a Add missing free() in exception handlers.
Reported by:    Stanford Metacompilation research group
2004-01-22 14:41:17 +00:00
wpaul
c46d660722 Add suspend and resume methods. I'm not certain this work correctly
since I can't easily test them on my laptop right now, but they
should do the right thing.
2004-01-22 03:00:59 +00:00
wpaul
39e6c1e2a7 Add support for TCP/IP checksum offload.
No, really.
2004-01-22 02:36:34 +00:00
wpaul
dda01dfaf8 Fix multicast and promiscuous mode handling for Yukon devices.
Submitted by:	Jung-uk Kim <jkim@niksun.com>
2004-01-21 22:32:15 +00:00
ume
e8cce017e5 Sync to pccarddevs 1.81. 2004-01-21 16:03:40 +00:00
ume
1bc38b5944 There is PANASONIC KXLC005 which has another product id. 2004-01-21 16:02:20 +00:00