These files are required to get packages in ports to build against atf and
also to get a couple of currently-failing tests to pass.
I'm following the approach already used by the libusb pkg-config files
installed by the system regarding the location and the install rules.
MFC after: 5 days
As a result, the kernel needs to process shorter pathnames if fts is not
changing directories (if fts follows symlinks (-L option to utilities), fts
cannot open "." or FTS_NOCHDIR was specified).
Side effect: If pathnames exceed PATH_MAX, [ENAMETOOLONG] is not hit at the
stat stage but later (opendir or application fts_accpath) or not at all.
Because we respect the FreeBSD src tree layout under /usr/tests, and because
the layout of the tests in the atf distfile does not match the former, the
tests for atf-c++ were not able to find the process_helper binary.
Fix this by explicitly hardcoding the right path in the FreeBSD test suite.
Obtained from: atf (git 1f0e878f7f127741a3762883ef24aef317e239d5)
MFC after: 1 week
Put test programs for internal modules into a 'detail' subdirectory of the
libatf-c and libatf-c++ test directories, just as the upstream distribution
does. This is necessary because the tests assume such layout to find the
process_helper program, and currently fail because of this divergence.
MFC after: 1 week
* Set errno to EAFNOSUPPORT if an address is provided which is neither
AF_INET nor AF_INET6.
* Don't modify the arguments.
* Don't smash the stack when provided with a non-zero port.
* Handle the case correctly where the first address provided is
an IPv6 address.
MFC after: 3 days
4370 avoid transmitting holes during zfs send
4371 DMU code clean up
illumos/illumos-gate@43466aae47
NOTE: Make sure the boot code is updated if a zpool upgrade is
done on boot zpool.
MFC after: 2 weeks
* msun/man/sinh.3:
* msun/man/tanh.3:
. Fix grammar.
* msun/src/e_coshl.c:
* msun/src/e_sinhl.c:
. Fix comment.
* msun/src/s_tanhl.c:
. Remove unused variables.
. Fix location/indentation of comments.
. Use comparison involving ints instead of long double.
. Re-order polynomial evaluation on ld128 for |x| < 0.25.
For now, retain the older order in an "#if 0 ... #else" block.
. Use int comparison to short-circuit the |x| < 1.5 condition.
Requested by: bde
. Hook coshl, sinhl, and tanhl into libm.
. Create symbolic links for corresponding manpages.
. While here remove a nearby extraneous space.
* Symbol.map:
* src/math.h:
. Move coshl, sinhl, and tanhl to their proper locations.
* man/cosh.3:
* man/sinh.3:
* man/tanh.3:
. Update the manpages.
* src/e_cosh.c:
* src/e_sinh.c:
* src/s_tanh.c:
. Add weak reference for LBDL_MANT_DIG==53 targets.
* src/imprecise.c:
. Remove the coshl, sinhl, and tanhl kludge.
* src/e_coshl.c:
. ld80 and ld128 implementation of coshl().
* src/e_sinhl.c:
. ld80 and ld128 implementation of sinhl().
* src/s_tanhl.c:
. ld80 and ld128 implementation of tanhl().
Obtained from: bde (mostly), das and kargl
* ld128/k_expl.h:
. Split out a computational kernel,__k_expl(x, &hi, &lo, &k) from expl(x).
x must be finite and not tiny or huge. The kernel returns hi and lo
values for extra precision and an exponent k for a 2**k scale factor.
. Define additional kernels k_hexpl() and hexpl() that include a 1/2
scaling and are used by the hyperbolic functions.
* ld80/s_expl.c:
* ld128/s_expl.c:
. Use the __k_expl() kernel.
Obtained from: bde
file as follows:
1. Common ia64-specific support functions have the ia64_ prefix.
2. Functions that work on physical cores have the phys_ prefix.
3. Functions that work on virtual cores have the virt_ prefix.
With that:
1. _kvm_kvatop() has been renamed to phys_kvatop() as it handles
physical cores only.
2. The new _kvm_kvatop() is nothing but a wrapper that calls either
phys_kvatop() or virt_kvatop() by virtue of the kvatop function
pointer in the vmstate structure.
3. virt_kvatop() is nothing but a wrapper around virt_addr2off().
4. virt_addr2off() iterates over the Phdrs to find the segment in
which the address falls and return the file offset for it.
Now it's up to the kernel to populate the core file appropriately.
produced will be called libkvm-${ARCH} instead of libkvm. This allows
installing it alongside the native version.
For symbol lookups, use ps_pglobal_lookup() instead of __fdnlist()
when building a cross libkvm. It is assumed that the cross tool that
uses the cross libkvm also provides an implementation for this
proc_services function.
Note that this commit does not change any of the architecture-specific
code for cross-compilation.
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Ignore writes to reserved bits in LVT entries.
- Export table entries the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.
Reviewed by: neel (earlier version)
clang-specific or gcc-specific flags, introduce the following new
variables for use in Makefiles:
CFLAGS.clang
CFLAGS.gcc
CXXFLAGS.clang
CXXFLAGS.gcc
In bsd.sys.mk, these get appended to the regular CFLAGS or CXXFLAGS for
the right compiler.
MFC after: 1 week
directory is like any subdirectory and as such needs to use a real
cluster number. To this end, keep a DE structure for the root in
the DOS_FS structure and populate it accordingly.
While here:
o allow consecutive path separators by skipping them all.
o add missing $FreeBSD$ keyword to dosfs.h.
code more naive and robust:
1. When setting ev_value, also always set ev_flags appropriately
2. Always check ev_value and ev_flags before calling free.
Both the value and the EV_DYNAMIC property can come directly from the
consumers of the environment functionality, so it's good to be careful.
And since this code is typically not looked at for long periods of
time, it's good to have it be a little "dumb-looking".
Trigger case for the bug:
env_setenv("foo", 0, "1", NULL, NULL);
env_setenv("foo", 0, "2", NULL, NULL);
Obtained from: Juniper Networks, Inc.
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
Reviewed by: grehan@
Get rid of the msg_peek() function, which has a problem. If there was less
data in the socket buffer than requested by the caller, the function would busy
loop, as select(2) will always return immediately.
We can just receive nvlhdr now, because some time ago we splitted receive of
data from the receive of descriptors.
MFC after: 1 week
owning the handle passed to __cxa_finalize() but which are registered
by other dso, when the process is inside exit(3).
Running them makes the destruction order wrong, and there is hope that
such destructors would not call dlclose(3), since it is pointless at
this stage of the process existence.
The change effectively disables the r211706 after the exit(3) is
called.
Reported and tested by: Michael Gmelin <freebsd@grem.de>
Analyzed by: dim
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is in the process of being submitted to the upstream LLDB
repository. The thread list functionality is modelled in part on
GDBRemoteCommunicationClient.
LLDB bug pr16696 and code review D2267
Sponsored by: DARPA, AFRL
