78217 Commits

Author SHA1 Message Date
Nathan Whitehorn
517524ec87 Fix iicbus_get_addr() on 64-bit big-endian systems. The bus accessor
passes a uintptr_t, not a uint32_t.
2010-07-08 14:19:52 +00:00
Adrian Chadd
d273f00076 Extend the ath debugging a little to log the interface name.
Some devices have >1 atheros card and the current debug prints
make it impossible to tell which interface is being unhappy.
2010-07-08 14:08:03 +00:00
Gleb Smirnoff
a5f9fc17c2 Since r209216 bpf(4) searches for mbuf_tags(9) and thus will not work with
a stub m_hdr instead of a full mbuf.

PR:		kern/148050
2010-07-08 13:07:40 +00:00
Konstantin Belousov
83d5d2963e Do not mention VM_ALLOC_RETRY in comment, and normalize the terminology
(blocking -> sleeping).

Reviewed by:	alc
MFC after:	3 days
2010-07-08 08:39:02 +00:00
Konstantin Belousov
1d9e77f6bf Make VM_ALLOC_RETRY flag mandatory for vm_page_grab(). Assert that the
flag is always provided, and unconditionally retry after sleep for the
busy page or failed allocation.

The intent is to remove VM_ALLOC_RETRY eventually.

Proposed and reviewed by:	alc
2010-07-08 08:37:51 +00:00
Alan Cox
77cb6e6f8d Correctly maintain the per-cpu field "curpmap" on amd64 just like we
do on i386.  The consequences of not doing so on amd64 became apparent
with the introduction of the COUNT_IPIS and COUNT_XINVLTLB_HITS
options.  Specifically, single-threaded applications were generating
unnecessary IPIs to shoot-down the TLB on other processors.  However,
this is clearly nonsensical because a single-threaded application is
only running on the current processor.  The reason that this happens
is that pmap_activate() is unable to properly update the old pmap's
field "pm_active" without the correct "curpmap".  So, in effect, stale
bits in "pm_active" were leading pmap_protect(), pmap_remove(),
pmap_remove_pages(), etc. to flush the TLB contents on some arbitrary
processor that wasn't even running the same application.

Reviewed by:	kib
MFC after:	3 weeks
2010-07-08 03:35:00 +00:00
Marcel Moolenaar
092b5c88c5 Add acpi_find_table() -- a convenience function for looking up an
ACPI table given the signature.
2010-07-07 20:07:33 +00:00
Marcel Moolenaar
1a6c2ccd5e Remove pointless BOOTP conditional. 2010-07-07 19:34:48 +00:00
Marcel Moolenaar
58bf34c327 Use the kernel's start address to determine what to map. This allows
us to link the kernel at different addresses without needing to build
a corresponding loader.
2010-07-07 19:06:53 +00:00
Adrian Chadd
ac35b90587 Fix the CS line definitions. These bits are for the CS2/CS1 lines
rather than CS1/CS0.

This has been tested on the Ubiqiti Routerstation Pro board.
2010-07-07 15:05:44 +00:00
Rui Paulo
80599de862 Fix style issues with the previous commit, namely
use-tab-instead-of-space and don't use underscores in macro variables.

Pointed out by:	bde
2010-07-07 12:08:58 +00:00
Attilio Rao
631cb86f11 - Simplify logic in handling ticks wrap-up
- Fix a bug where thread may be in sleeping state but the wchan won't
  be set, leading to an empty container for sleepq_type(). [0]

Sponsored by:		Sandvine Incorporated
[0] Submitted by:	Bryan Venteicher
			<bryanv at daemoninthecloset dot org>
MFC after:		3 days
X-MFC:			209577
2010-07-07 12:00:11 +00:00
Kevin Lo
054d87d697 Add the u3g(4) driver. I can't find any reason why it's not here. 2010-07-07 09:23:46 +00:00
Marcel Moolenaar
b1b6c03e3d Provide more examples for error injection. 2010-07-06 23:13:21 +00:00
Jung-uk Kim
3664686221 Fix mis-merges in the previous commit. 2010-07-06 21:41:08 +00:00
Jung-uk Kim
a88e22b7ad Merge ACPICA 20100702. 2010-07-06 20:57:28 +00:00
Alexander Motin
25a519a918 ATA device reset starts probe sequence from the beginning. If reset caused
by timeout/error of one of probe commands, process may continue infinitely.
Make CAM ATA more robust to faulty devices and false positive detections,
abort probe after two restarts on timeouts or ten on other errors.
2010-07-06 19:05:41 +00:00
Konstantin Belousov
d12fc952b7 Calculate nshift only once.
Also noted by:	avg
MFC after:	1 week
2010-07-06 18:22:57 +00:00
Konstantin Belousov
aa81ae08e9 In revoke(), verify that VCHR vnode indeed belongs to devfs.
Found and tested by:	pho
MFC after:	1 week
2010-07-06 18:20:49 +00:00
Pyun YongHyeon
864104fe59 Zero entire status block and add missing bus_dmamap_sync(9). 2010-07-06 18:17:31 +00:00
Jung-uk Kim
061b7e5463 Plug a possible memory leak.
Submitted by:	Yamagi Burmeister (lists at yamagi dot org)
2010-07-06 18:08:55 +00:00
Jung-uk Kim
c3cbd4125e Fix a possible null pointer dereference. A patch for -STABLE was
Submitted by:	Yamagi Burmeister (lists at yamagi dot org)
2010-07-06 18:05:05 +00:00
Rui Paulo
8923c96ee1 Introduce USD_{SET,GET}{BASE,LIMIT}. These help setting up the user
segment descriptor hi and lo values. Idea from Solaris.

Reviewed by:	kib
2010-07-06 16:56:27 +00:00
Ed Maste
67d187beb1 Remove defunct email address from header as well. 2010-07-06 16:55:39 +00:00
Ed Maste
d11f4f5dea Remove email address that no longer exists. 2010-07-06 16:42:11 +00:00
Nathan Whitehorn
928f33197d It does not actually make sense to provide an IPI facility on non-root
PICs, so replace cpuid logic with an assert.
2010-07-06 15:38:38 +00:00
Nathan Whitehorn
4dc2f910ee Fix interrupt distribution to multiple CPUs on systems with cascaded PICs.
Because slave PICs send all interrupts to their CPU 0 output line (which
is routed to a pin on the master PIC), changes to per-CPU register banks
like EOI on the slave PIC must be accessed for CPU 0, instead of the
CPU actually processing the interrupt.

Submitted by:	Andreas Tobler
2010-07-06 15:31:58 +00:00
Nathan Whitehorn
0870f0be13 Move the EOI logic when starting ithreads into intr_machdep instead of
relying on it as a side effect of PIC_MASK() in the PIC drivers, and add
an inmplementation of assign_cpu() for the kernel interrupt layer.
2010-07-06 15:27:05 +00:00
Marko Zec
c9840b23d5 Fix a double-free bug which can occur if both bit error rate and packet
duplication probability are configured on a ng_pipe node.

Submitted by:	Jeffrey Ahrenholtz
MFC after:	3 days
2010-07-06 12:13:15 +00:00
Gleb Smirnoff
7418c6e1a9 Avoid double-free. In error cases ipfw(4) frees the mbuf(4), we don't
need to.

PR:		kern/145462
2010-07-06 10:45:38 +00:00
Rui Paulo
6e19f4de12 Merge from vendor-sys/opensolaris:
* add fasttrap files
2010-07-06 10:28:19 +00:00
Ed Schouten
822eb2b050 Fix a race condition, where a TTY could be destroyed twice.
There are special cases where tty_rel_free() can be called twice in a
row, namely when closing and revoking the TTY at the same moment. Only
call destroy_dev_sched_cb() once.

Reported by:	Jeremie Le Hen
MFC after:	1 week
2010-07-06 08:56:34 +00:00
Jeff Roberson
9f9c8c59ae - Handle the truncation of an inode with an effective link count of 0 in
the context of the process that reduced the effective count.  Previously
   all truncation as a result of unlink happened in the softdep flush
   thread.  This had the effect of being impossible to rate limit properly
   with the journal code.  Now the process issuing unlinks is suspended
   when the journal files.  This has a side-effect of improving rm
   performance by allowing more concurrent work.
 - Handle two cases in inactive, one for effnlink == 0 and another when
   nlink finally reaches 0.
 - Eliminate the SPACECOUNTED related code since the truncation is no
   longer delayed.

Discussed with:	mckusick
2010-07-06 07:11:04 +00:00
Pyun YongHyeon
55a24a0597 It seems read DMA mode register requires both IPv4 TSO and IPv6 TSO
configuration to get IPv4 TSO work on BCM57780. While I'm here
apply the same fix to BCM5785 which shares similar hardware feature
of BCM57780. This change makes TSO work on BCM57780.

Tested by:	Tong Liu <nemoliu <> gmail dot com>
2010-07-06 02:07:59 +00:00
Konstantin Belousov
5f195aa32e Add the ability for the allocflag argument of the vm_page_grab() to
specify the increment of vm_pageout_deficit when sleeping due to page
shortage. Then, in allocbuf(), the code to allocate pages when extending
vmio buffer can be replaced by a call to vm_page_grab().

Suggested and reviewed by:	alc
MFC after:	2 weeks
2010-07-05 21:13:32 +00:00
Jaakko Heinonen
13c02cbb18 Extend the kernel unit number allocator for allocating specific unit
numbers. This change adds a new function alloc_unr_specific() which
returns the requested unit number if it is free. If the number is
already allocated or out of the range, -1 is returned.

Update alloc_unr(9) manual page accordingly and add a MLINK for
alloc_unr_specific(9).

Discussed on:	freebsd-hackers
2010-07-05 16:23:55 +00:00
Konstantin Belousov
757216f3a5 Several cleanups for the r209686:
- remove unused defines;
- remove unused curgeneration argument for vm_object_page_collect_flush();
- always assert that vm_object_page_clean() is called for OBJT_VNODE;
- move vm_page_find_least() into for() statement initial clause.

Submitted by:	alc
2010-07-04 19:02:32 +00:00
Konstantin Belousov
34a39b7b1f Obey sv_syscallnames bounds in syscallname().
Reported and tested by:	pho
2010-07-04 18:16:17 +00:00
Marius Strobl
9f7666cebe - Pin the IPI cache and TLB demap functions in order to prevent migration
between determining the other CPUs and calling cpu_ipi_selected(), which
  apart from generally doing the wrong thing can lead to a panic when a
  CPU is told to IPI itself (which sun4u doesn't support).
  Reported and tested by: Nathaniel W Filardo
- Add __unused where appropriate.

MFC after:	3 days
2010-07-04 12:43:12 +00:00
Konstantin Belousov
8a26007903 Extend ptrace(PT_LWPINFO) to report siginfo for the signal that caused
debugee stop. The change should keep the ABI. Take care of compat32.

Discussed with:	davidxu, jhb
MFC after:	2 weeks
2010-07-04 11:48:30 +00:00
Konstantin Belousov
67322a4cd2 Constify source argument for siginfo_to_siginfo32().
MFC after:	1 week
2010-07-04 11:43:53 +00:00
Konstantin Belousov
e239bb9730 Reimplement vm_object_page_clean(), using the fact that vm object memq
is ordered by page index. This greatly simplifies the implementation,
since we no longer need to mark the pages with VPO_CLEANCHK to denote
the progress. It is enough to remember the current position by index
before dropping the object lock.

Remove VPO_CLEANCHK and VM_PAGER_IGNORE_CLEANCHK as unused.
Garbage-collect vm.msync_flush_flags sysctl.

Suggested and reviewed by:	alc
Tested by:	pho
2010-07-04 11:26:56 +00:00
Konstantin Belousov
b382c10a57 Introduce a helper function vm_page_find_least(). Use it in several places,
which inline the function.

Reviewed by:	alc
Tested by:	pho
MFC after:	1 week
2010-07-04 11:13:33 +00:00
Warner Losh
2a08b0b7a1 Add a safety-belt. If the identified disk has 0 blocks, don't attach
it.  This can happen in some cases when plugging in SD/SmartCard PC
Cards with empty slots.  It is better to detect this bogosity, and
refuse to attach rather than panic with a division by zero (in one of
many places) down stream.
2010-07-04 07:42:52 +00:00
Warner Losh
907659f0dc Minor formatting nits. 2010-07-04 05:58:17 +00:00
Marcel Moolenaar
e987ee58d9 Allocate and setup an interrupt vector for corrected machine checks.
For now, just print when we get the interrupt, but eventually we need
to collect the details and provide a more useful report.
2010-07-03 20:19:20 +00:00
Nathan Whitehorn
c7c4bc64f2 Add a missing conditional. We should not bind the PIC interrupt unless
the interrupt's PIC (a) exists and (b) is the root PIC.

Reported by:	Andreas Tobler
2010-07-03 20:11:04 +00:00
Alan Cox
b64400a03f Improve the comment and man page for vm_page_alloc(). Specifically,
document one of the optional flags; clarify which of the flags are
optional (and which are not), and remove mention of a restriction on
the reclamation of cached pages that no longer holds since version 7.

MFC after:	1 week
2010-07-03 18:25:37 +00:00
Alexander Motin
7ce1f3e580 Add ata(4) ability to limit initial ATA mode for devices via device hints.
After boot this mode can be changed with atacontrol/camcontrol as usual.
It works for both legacy and ATA_CAM wrapper mode.

PR:		kern/123980
2010-07-03 14:14:42 +00:00
Randall Stewart
478fbccb67 This fixes a crash in SCTP. It was possible to have a
large number of packets queued to a crashing process.
In a specific case you may get 2 ABORT's back (from
say two packets in flight). If the aborts happened to
be processed at the same time its possible to have
one free the association while the other is trying
to report all the outbound packets. When this occured
it could lead to a crash.

MFC after:	3 days
2010-07-03 14:03:31 +00:00