o Automomous Power State Transition
o Host Memory Buffer
o Timestamp
o Keep Alive Timer
o Host Controlled Thermal Management
o Non-Operational Power State Config
Also note that feature codes 0x78-0x7f are reserved for the NVMe
Management Interface.
Sponsored by: Netflix
Though technically correct, GCC complains about usingi a "%zd" format
specifier for a long.
Reported by: cem
MFC after: 3 weeks
X-MFC-With: 322893
Sponsored by: Spectra Logic
removal of the "blk" parameter from blst_meta_alloc() had the unintended
effect of generating an out-of-range allocation when the cursor reaches
the end of the tree if the number of managed blocks in the tree equals
the so-called "radix" (which in the blist code is not the standard notion
of what a radix is but rather the maximum number of leaves in a tree of
the current height.) In other words, only certain swap configurations
were affected, which is why earlier testing did not reveal the problem.
Submitted by: Doug Moore <dougm@rice.edu>
Reported by: pho, kib
Tested by: pho
X-MFC with: r322459
Differential Revision: https://reviews.freebsd.org/D12106
getmntinfo(3) is designed around a relatively static or slow growing set of
current mounts. It tried to detect a race with somewhat concurrent mount
and re-call getfsstat(2) in that case, looping indefinitely. It also
allocated space for a single extra mount as slop.
In the case where the user has a large number of mounts and is adding them
at a rapid pace, it fell over.
This patch makes two functional changes:
1. Allocate even more slop. Double whatever the last getfsstat(2) returned.
2. Abort and return some known results after looping a few times
(arbitrarily, 3). If the list is constantly changing, we can't guarantee
we return a full result to the user at any point anyways.
While here, add very basic functional tests for getmntinfo(3) to the libc
suite.
PR: 221743
Submitted by: Peter Eriksson <peter AT ifm.liu.se> (earlier version)
Sponsored by: Dell EMC Isilon
mtree path names and link attributes are encoded, generally using strvis. Newer
versions of mtree will use C-style escapes but previously the accepted form was
octal escapes. makefs' mtree code spots the C-style escapes but fails to deal
with octal escapes correctly.
Remove mtree's escape-decoding code (except for a few instances where it's
needed) and instead pass pathnames and link targets through strunvis prior to
use.
Reviewed by: marcel
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12104
dd(1) casts many of its numeric arguments from uintmax_t to intmax_t and
back again to detect whether or not the original arguments were negative.
This is not correct, and causes problems with boundary cases, for example
when count is SSIZE_MAX-1.
PR: 191263
Submitted by: will@worrbase.com
Reviewed by: pi, asomers
MFC after: 3 weeks
With Flower (CloudABI's network connection daemon) becoming more
complete, there is no longer any need for creating any unconnected
sockets. Socket pairs in combination with file descriptor passing is all
that is necessary, as that is what is used by Flower to pass network
connections from the public internet to listening processes.
Remove all of the kernel bits that were used to implement socket(),
listen(), bindat() and connectat(). In principle, accept() and
SO_ACCEPTCONN may also be removed, but there are still some consumers
left.
Obtained from: https://github.com/NuxiNL/cloudabi
MFC after: 1 month
- map the hard-coded frame buffer address above KERNBASE. Using the
physical address only worked because of larger mapping bugs.
The hard-coded frame buffer address only works on x86. Use messy ifdefs
to try to avoid warnings about unused code for other arches.
- remove the sysctl for reading and writing the table kernel console
attributes. Writing only worked for emergency output since normal
output uses unalterd copies.
- fix the test for the emergency console being usable
- explain why a hard-coded attribute is used very early. Emergency output
works on x86 even before the pcpu pointer is initialized.
vnode lock.
Caller of softdep_count_dependencies() may own a buffer lock, which
might conflict with the lock order.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
Advertise this by changing the defaults to mostly red. If you don't like
this, change them (almost) back using:
vidcontrol -c charcolors,base=7,height=0
vidcontrol -c mousecolors,base=0[,height=15]
The (graphics mode only) mouse cursor colors were hard-coded to a black
border and lightwhite interior. Black for the border is the worst
possible default, since it is the same as the default black background
and not good for any dark background. Reversing this gives the better
default of X Windows. Coloring everything works better still. Now
the coloring defaults to a lightwhite border and red interior.
Coloring for the character cursor is more complicated and mode
dependent. The new coloring doesn't apply for hardware cursors. For
non-block cursors, it only applies in graphics mode. In text mode,
the cursor color was usually a hard-coded (dull)white for the background
only, unless the foreground was white when it was a hard-coded black
for the background only, unless the foreground was white and the
background was black it was reverse video. In graphics mode, it was
always reverse video for the block cursor. Reverse video is worse,
especially over cutmarking regions, since cutmarking still uses simple
reverse video (nothing better is possible in text mode) and double
reverse video for the cursor gives normal video. Now, graphics mode
uses the same algorithm as the best case for text mode in all cases
for graphics mode. The hard-coded sequence { white, black, } for the
background is now { red, white, blue, } where the first 2 colors can
be configured. The blue color at the end is a sentinel which prevents
reverse video being used in most cases but breaks the compatibility
setting for white on black and black on white characters. This will
be fixed later. The compatibility setting is most needed for mono modes.
The previous commit to syscons.c changed sc_cnterm() to be more careful.
It followed null pointers in some cases. But sc_cnterm() has been
unreachable for 15+ years since changes for multiple consoles turned
off calls to the the cnterm destructor for all console drivers. Before
them, it was only called at boot time. So no driver with an attached
console has ever been unloadable and not even the non-console destructors
have been tested much.
These files are compiled in userland too, so we can't use sys/systm.h
and rely on CTASSERT. Switch to using _Static_assert instead.
MFC After: 3 days
Sponsored by: Netflix
card has to do PCIe transactions to complete the reset process, but
can't do them, per the PCIe spec, unless bus mastering is enabled.
Submitted by: Kinjal Patel
PR: 22166
terminal state for kernel console output.
r56043 in 2000 added many complications to support dynamic selection
of the terminal emulator using modules and the ioctl CONS_SETTERM.
This was never completed. There are still no modules, but it is easy
to restore the scterm and dumb emulators at compile time. Then
boot-time configuration for the preferred one doesn't work right, but
CONS_SETTERM almost works after fixing this bug. CONS_SETTERM only
switches the emulator for the user state, leaving the kernel state(s)
still using the boot-time emulator. The fix is especially important
when switching from sc to scteken, since the scteken state has pointers
in it.
Rename kernel_console_ts to sc_kts.
The previous update to the driver to 3.2.12-k changed the VF's API version
to 1.2, but did not let the VF fall back to 1.1 or 1.0 versions. So, this
patch tries 1.2 first, then the older versions in succession if that fails.
This should allow the VF driver to negotiate 1.1 and work with older PF
drivers, such as the one used in Amazon's EC2 service.
PR: 220872
Submitted by: Jeb Cramer <jeb.j.cramer@intel.com>
MFC after: 1 week
Sponsored by: Intel Corporation
extreme outliers from dodgy drives. Adjust comments to reflect this,
and make sure that the number of latency buckets match in the two
places where it matters.
o Allow I/O scheduler to gather times on 32-bit systems. We do this by shifting
the sbintime_t over by 8 bits and truncating to 32-bits. This gives us 8.24
time. This is sufficient both in range (256 seconds is about 128x what current
users need) and precision (60ns easily meets the 1ms smallest bucket size
measurements). 64-bit systems are unchanged. Centralize all the time math so
it's easy to tweak tha range / precision tradeoffs in the future.
o While I'm here, the I/O scheduler should be using periph_data rather than
sim_data since it is operating on behalf of the periph.
Differential Review: https://reviews.freebsd.org/D12119
via soisdisconnected(), and in the earlier unlock earlier to avoid lock
recursion.
This fixes a situation when a socket on accept queue is reset before being
accepted.
Reported by: Jason Eggleston <jeggleston llnw.com>
the upstream release_50 branch.
As of this version, lib/msun's trig test should also work correctly
again (see bug 220989 for more information).
PR: 220989
MFC after: 2 months
X-MFC-with: r321369
When inserting a partitioned disk, devfs and geom will announce the whole
disk before they announce the partition. If the partition containing ZFS
extends to one of the disk's extents, then zfsd will see a ZFS label on the
whole disk and attempt to online it. ZFS is smart enough to activate the
partition instead of the whole disk, but only if GEOM has already created
the partition's provider.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs.h
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_import.c
Add a zpool_read_all_labels method. It's similar to
zpool_read_label, but it will return the number of labels found.
cddl/usr.sbin/zfsd/zfsd_event.cc
When processing a DevFS CREATE event, only online a VDEV if we can
read all four ZFS labels.
Reviewed by: mav
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D11920
A follow-up to r322836.
Warnings for the unused declaration were breaking some second tier
architectures, but did not show up in Clang on x86.
Reported by: markj (ddb.4), emaste (declaration)
Sponsored by: Dell EMC Isilon
When debugging a deadlock, it is useful to follow the full chain of locks as
far as possible.
Reviewed by: jhb
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12115
Not enabling FSGSBASE in %cr4 does not prevent reporting of the
feature by the CPUID instruction (blame Int*l). As result, kernels
which were run under monitors pretended that usermode cannot modify
TLS base without the syscall, while libc noted right combination of
capable CPU and the new kernel version, trying to use the WRFSBASE
instruction.
Really old hypervisors that cannot handle enablement of these features
in %cr4 would require the manual configuration, by setting the loader
tunable hw.cpu_stdext_disable=0x81
Reported by: lwhsu, mjoras
Sponsored by: The FreeBSD Foundation
MFC after: 18 days
fgrep/grep -F will error out at runtime if compiled with a regex(3)
that does not define REG_NOSPEC or REG_LITERAL. glibc is one such regex(3)
implementation, and as it turns out they don't support literal matching at
all.
Provide a primitive literal matcher for use with glibc and other
implementations that don't support literal matching so that we don't
completely lose fgrep/grep -F if compiled against libgnuregex on stable/10,
stable/11, or other systems that we don't necessarily support.
This is a wholly unoptimized implementation with no plans to optimize it as
of now. This is due to both its use-case being primarily on unsupported
systems in the near-distant future and that it's reinventing the wheel that
we already have available as a feature of regex(3).
Reviewed by: cem, emaste, ngie
Approved by: emaste (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12056
Previously added tests only check that fgrep is somewhat sane and works. Add
some more tests that check that the implementation is basically functional
and not producing incorrect results with various flags.
Reviewed by: cem, emaste, ngie
Approved by: emaste (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12056
- Include debug symbols in static libraries. This permits binaries
to include debug symbols for functions obtained from static libraries.
- Permit the C/C++ compiler flags added for MK_DEBUG_FILES to be
overridden by setting DEBUG_FILES_CFLAGS. Use this to limit the debug
information for llvm libraries and binaries.
Reviewed by: emaste
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12025
r322767 fixed the mips64 build failure with Clang with a minimal change
to use __FreeBSD__ instead of FreeBSD in a #if test. For consistency
and to facilitate possible upstreaming change the other macros in the
test to their canonical form.
Discussed with: jhb
The check for timestamps are too early to handle SYN-ACK correctly.
So move it down after the corresponing processing has been done.
PR: 216832
Obtained from: antonfb@hesiod.org
MFC after: 1 week
LLD_BOOTSTRAP is intended to control the linker used to link world and
kernel, while LLD_IS_LD is intended to control the linker installed in
that world.
Force LLD_IS_LD equal to LLD_BOOTSTRAP for the cross-tools build and
install phase, so that lld will be installed as the ld to run on the
host, when LLD_BOOTSTRAP is set.
PR: 221543
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12072
