Commit Graph

19191 Commits

Author SHA1 Message Date
Ian Lepore
ac268038eb Actually build and install the spigen.4 manpage. 2018-07-11 23:59:04 +00:00
Edward Tomasz Napierala
f1dd498487 Tweak ports(7) manual page to better explain the basics.
Reviewed by:	allanjude@ (earlier version)
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D16149
2018-07-11 13:53:44 +00:00
Ben Widawsky
2c6d9edb2c run(4): Add a new USB device ID.
Summary:
Add the device id of the Panda Wireless PAU06 which seems to be
the already-supported combination of RT5392 MAC and RF RT5372
radio.

Reviewed By: allanjude, eadler, jhb
Approved By: jhb
Differential Revision: https://reviews.freebsd.org/D16211
2018-07-11 02:32:06 +00:00
Konstantin Belousov
b3042426d0 Remove bits of the old NUMA.
Remove numactl(1), edit numa(4) to bring it some closer to reality,
provide libc ABI shims for old NUMA syscalls.

Noted and reviewed by:	brooks (previous version)
Sponsored by:	The FreeBSD Foundation
Differential revision:	https://reviews.freebsd.org/D16142
2018-07-10 22:00:20 +00:00
Renato Botelho
0b343a8d9c A direct call to echo was intruduced in r333407, which made messages
to be displayed when make is called with -s.  Replace it by ${ECHO}.

Reviewed by:	brd, bdrewery
Approved by:	brd, bdrewery
Sponsored by:	Rubicon Communications, LLC (Netgate)
Differential Revision:	https://reviews.freebsd.org/D16195
2018-07-10 11:33:37 +00:00
Ian Lepore
d0e6405ddd Add a manpage for the imx_spi driver. 2018-07-09 19:00:13 +00:00
Ian Lepore
9b4738cf7b Make the imx6_snvs driver usable as a module, add pnp info. Add a manpage. 2018-07-08 19:35:41 +00:00
Ian Lepore
cf2cec68bd Add pnp info to imx6_ahci, and add a module makefile, and a manpage for it. 2018-07-08 00:27:28 +00:00
Ian Lepore
fdd9550b54 Move armv8crypto.4 into the aarch64 dir; should have been part of r336077.
Pointy hat:	ian@
Reported by:	rpokola@
2018-07-08 00:02:14 +00:00
Ian Lepore
284db32c87 Move arm- and aarch64-specific manpages into arch-specific directories.
This removes a bit of the .if/.endif clutter from man4/Makefile by using
the existing machinery that supports per-arch manpages.
2018-07-07 21:49:30 +00:00
Ian Lepore
9287e4663a Add a manpage for the imx5/6 watchdog driver. 2018-07-07 20:43:01 +00:00
Ben Widawsky
29e44344da Adding myself to committers-src.dot and calendar.freebsd
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D16154
2018-07-06 16:22:26 +00:00
Andrew Turner
2bf9501287 Create a new macro for static DPCPU data.
On arm64 (and possible other architectures) we are unable to use static
DPCPU data in kernel modules. This is because the compiler will generate
PC-relative accesses, however the runtime-linker expects to be able to
relocate these.

In preparation to fix this create two macros depending on if the data is
global or static.

Reviewed by:	bz, emaste, markj
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D16140
2018-07-05 17:13:37 +00:00
Jesper Schmitz Mouridsen
dccc6f2b08 Add jsm in committers-ports.dot with mentor/mentee
Approved by:	miwi (mentor)
Differential Revision:https://reviews.freebsd.org/D16143
2018-07-05 16:18:05 +00:00
Sean Chittenden
9a263af1dc Update with the members of the 10th core team, core.x. 2018-07-05 15:40:14 +00:00
Edward Tomasz Napierala
4a7ec940e4 Fix mandoc -Tlint warning introduced in r335977.
Reported by:	0mp@
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2018-07-05 11:50:59 +00:00
Edward Tomasz Napierala
1b3fba16da Add trivial usage example to ports(7).
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2018-07-05 11:03:11 +00:00
Sean Bruno
6f077571b9 WITHOUT_SERVICESDB:
Add src.conf knob to disable the installation of /var/db/services.db

Default to leaving services.db in place, but allow the removal of the
file and its creation with a src.conf knob.

This file ends up being 2MB in size.  For small systems this is a waste
of space but its a tradeoff.

Reviewed by:	bdrewery
Differential Revision:	https://reviews.freebsd.org/D9655
2018-07-04 17:18:35 +00:00
Matt Macy
b3dfc51828 epoch(9): Fix man page typo
Submitted by:	se
Reported by:	se
2018-07-04 17:06:23 +00:00
Sean Chittenden
f7e6276436 Complete my vertex even though edges were in place.
Reported by:	swills
Approved by:	swills (mentor, implicit)
2018-07-04 16:50:51 +00:00
Matt Macy
4619bce883 epoch(9): update in_epoch() description as well 2018-07-04 03:54:39 +00:00
Matt Macy
68195696a6 epoch(9): update man page for r335924 2018-07-04 03:44:36 +00:00
Will Andrews
cc535c95ca Revert r335833.
Several third-parties use at least some of these ioctls.  While it would be
better for regression testing if they were used in base (or at least in the
test suite), it's currently not worth the trouble to push through removal.

Submitted by:	antoine, markj
2018-07-04 03:36:46 +00:00
Matt Macy
345432aab7 document MODULE_TIED behavior change 2018-07-03 23:09:09 +00:00
John Baldwin
1d2ec69b5e Don't specify the desired march/mabi for RISC-V in ACFLAGS.
ACFLAGS is only used in addition to CFLAGS, so setting the options in
both was redundant.  However, ACFLAGS is added to the command line
after CFLAGS, so the settings from ACFLAGS were applied for assembly
files in kernel modules after the kernel-specific march/abi in CFLAGS.
As a result, the hard-float ACFLAGS in bsd.cpu.mk was overriding the
soft-float CFLAGS.gcc in sys/conf/kern.mk.  In particular,
dtrace_asm.o was compiled as hard-float and the linker refused to link
dtrace.ko since its object files contained a mix of hard and soft
float.

Reviewed by:	br
Sponsored by:	DARPA / AFRL
Differential Revision:	https://reviews.freebsd.org/D16054
2018-07-03 15:24:09 +00:00
Ruslan Bukin
f41c578fed Add GCC 8.1.0 compiler warning flags.
Sponsored by:	DARPA, AFRL
2018-07-03 10:51:59 +00:00
Hartmut Brandt
8e9b3e7071 Update bsnmp to version 1.13. This does not bring user-visible changes.
For developers gensnmptree can now generate functions for enums to convert
between enums and strings and to check the validity of a value.
The sources in FreeBSD are now in sync with the upstream which allows to
bring in IPv6 modifications.
2018-07-03 08:44:40 +00:00
Oleksandr Tymoshenko
5f88cf68fc [man] Get uhid(4) man page in sync with current API
API documented in previous version of uhid(4) man page has been obsolete
since May 2009 when old USB stack was replaced with USB2 implentation.
Current API has the same set of ioctl calls but uses usb_gen_descriptor
structure to pass data to/from kernel.

MFC after:	1 week
2018-07-01 22:48:00 +00:00
Kristof Provost
6dd9dfc449 carp: Minor language improvements in the man page
Submitted by:	Massimiliano Stucchi <max AT stucchi.ch>
2018-07-01 15:17:53 +00:00
Kristof Provost
0d3d234cd1 carp: Set DSCP value CS7
Update carp to set DSCP value CS7(Network Traffic) in the flowlabel field of
packets by default. Currently carp only sets TOS_LOWDELAY in IPv4 which was
deprecated in 1998. This also implements sysctl that can revert carp back to
it's old behavior if desired.

This will allow implementation of QOS on modern network devices to make sure
carp packets aren't dropped during interface contention.

Submitted by:	Nick Wolff <darkfiberiru AT gmail.com>
Reviewed by:	kp, mav (earlier version)
Differential Revision:	https://reviews.freebsd.org/D14536
2018-07-01 08:37:07 +00:00
Will Andrews
24e8c13220 pf(4): remove reference to non-existent pflow(4). 2018-07-01 01:56:40 +00:00
Will Andrews
c1887e9f09 pf: remove unused ioctls.
Several ioctls are unused in pf, in the sense that no base utility
references them.  Additionally, a cursory review of pf-based ports
indicates they're not used elsewhere either.  Some of them have been
unused since the original import.  As far as I can tell, they're also
unused in OpenBSD.  Finally, removing this code removes the need for
future pf work to take them into account.

Reviewed by:		kp
Differential Revision:	https://reviews.freebsd.org/D16076
2018-07-01 01:16:03 +00:00
Will Andrews
e0ddf97a63 Rather belatedly add myself to committers-src.dot. 2018-07-01 01:11:32 +00:00
Maxim Konovalov
391f09e122 ascii art fixed. 2018-06-30 18:18:41 +00:00
Eitan Adler
b2c6bc79bb bsd-family-tree: Announce DragonFly version 5.2.2
Obtained from:	https://www.dragonflybsd.org/release52/
2018-06-30 01:04:37 +00:00
Eitan Adler
6e5e6c444d bsd-family-tree: Announce DragonFly version 5.2.2
Obtained from:	https://www.dragonflybsd.org/release52/
2018-06-30 01:02:59 +00:00
Brooks Davis
fa8c921e3f Correct link metadata created when installing with -DNO_ROOT.
Explicitly specify owner/group/mode metadata when creating links.

More consistently use INSTALL_SYMLINK to install symlinks.

Reviewed by:	bdrewery
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D11231
2018-06-29 16:07:56 +00:00
Brad Davis
f59e535254 Simplify using bsd.endian.mk and have it provide CAP_MKDB_ENDIAN, since it is
the most common usage.

Approved by:	bapt (mentor)
2018-06-28 13:48:59 +00:00
Bryan Drewery
4e2a44900d LLVM_TARGET_ALL: Default LLVM_TARGET_ARM on for aarch64.
This is needed for -m32 support which is used in the kernel cloudabi32 module.

Tweak the style to make it easier to understand.

MFC after:	2 weeks
X-MFC-with:	r335706
Reported by:	Mark Millard
Sponsored by:	Dell EMC
2018-06-27 21:36:57 +00:00
Bryan Drewery
96a0acc4ce Don't use CCACHE for linking.
MFC after:	2 weeks
Sponsored by:	Dell EMC
2018-06-27 19:29:15 +00:00
Bryan Drewery
8e4ce6157f Follow-up r335706: Fix LLVM_TARGET_ALL handling to use TARGET_ARCH.
Pointyhat to:	bdrewery
MFC after:	2 weeks
X-MFC-with:	r335706
Reported by:	Mark Millard
Sponsored by:	Dell EMC
2018-06-27 18:43:34 +00:00
Glen Barber
06d4e451d4 Add FreeBSD 11.2.
Sponsored by:	The FreeBSD Foundation
2018-06-27 17:40:29 +00:00
Bryan Drewery
bf64e87984 Regenerate 2018-06-27 17:18:12 +00:00
Bryan Drewery
01f124b46f tinderbox: Only build clang/lld once if needed.
Need to handle LLD_BOOTSTRAP separately (for archs like i386).
This would be much better off with an off-by-default option like
SHARED_TOOLCHAIN that universe force-enabled.  Then a normal buildworld
would store the toolchain there if enabled and otherwise in WORLDTMP
with only the 1 arch selected.

MFC after:	3 weeks
Sponsored by:	Dell EMC
2018-06-27 16:58:10 +00:00
Bryan Drewery
90eb413a33 CCACHE_BUILD: Don't try using ccache for compile-linking .c files.
Without -c ccache just executes the real compiler.

MFC after:	2 weeks
Sponsored by:	Dell EMC
2018-06-27 16:58:07 +00:00
Bryan Drewery
759aa20d7b CCACHE_BUILD: Avoid ccache when looking up compiler metadata.
MFC after:	2 weeks
Sponsored by:	Dell EMC
2018-06-27 16:58:03 +00:00
Bryan Drewery
631e709f2b Add LLVM_TARGET_ALL option.
LLVM_TARGET_* will auto be set based on LLVM_TARGET_ALL and MK_CLANG.

If LLVM_TARGET_ALL is disabled, during a cross-build, then SYSTEM_COMPILER
and SYSTEM_LINKER are auto disabled.

This option should be used by users rather than the per-arch LLVM_TARGET
options as it is simpler to maintain for them should the supported
target list change.

MFC after:	2 weeks
Reviewed by:	sbruno, dim
Sponsored by:	Dell EMC
Differential Revision:	https://reviews.freebsd.org/D16020
2018-06-27 16:57:51 +00:00
Bryan Drewery
100fafebbf Use dependent options to auto enable _SUPPORT and CLANG_FULL options.
MFC after:	1 week
Reviewed by:	sbruno, dim
Sponsored by:	Dell EMC
Differential Revision:	https://reviews.freebsd.org/D16018
2018-06-27 16:57:47 +00:00
Martin Wilke
ff6197771a - Added myself to committers-src.dot
Approved by:	araujo (mentor)
Differential Revision:	https://reviews.freebsd.org/D16030
2018-06-27 03:50:11 +00:00
Ben Woods
217df2da08 geli attach multiple providers
Allow attaching of multiple geli providers at once if they use same
passphrase and keyfiles.

This is helpful when the providers being attached are not used for boot,
and therefore the existing code to first try the cached password when
tasting the providers during boot does not apply.

Multiple providers with the same passphrase and keyfiles can be attached
at the same time during system start-up by adding the following to
rc.conf:
  geli_groups="storage backup"
  geli_storage_flags="-k /etc/geli/storage.keys"
  geli_storage_devices="ada0 ada1"
  geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys"
  geli_backup_devices="ada2 ada3"

Reviewed by:	wblock, delphij, jilles
Approved by:	sobomax (src), bcr (doc)
Differential Revision:	https://reviews.freebsd.org/D12644
2018-06-26 18:07:16 +00:00