If a FW assert is considered fatal, indicated by a new bit in the
health buffer, reset the FW. After the reset, follow the normal
recovery flow.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Some mlx5 adapter firmware allows the driver to reset the firmware in
the event of an error. When a software reset is issued on any physical
function all PFs enter reset state. This is a recoverable condition.
The existing recovery flow was designed to allow the recovery of a
VF after a PF driver reload. This patch expands the scope of that
flow to recover PFs or VFs after a SW reset has been issued.
When a software reset is issued the following occurs:
1. The NIC interface mode is set to SW_RESET (7) while the reset is in
progress.
2. Once the reset completes the NIC interface mode is set to NIC
disabled (1).
After the reset has been issued (added in a subsequent patch) the
health poll for other functions will detect that the NIC interface
state has been set to disabled. This will cause it to enter the
existing recovery flow. If the PCI is still working (meaning it
doesn't return 0xff on all reads) it means recovery can proceed
immediately instead of waiting 60 seconds.
The error detetion has also been refactored to avoid incorrect or
misleading log messages.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
When mlx5_enter_error_state() operation is forced by shutdown, the
messages surrounding setting the error state are not informational
and confuse users.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch accumulates the following Linux commits:
- 8812c24d28f4972c4f2b9998bf30b1f2a1b62adf
net/mlx5: Add fast unload support in shutdown flow
- 59211bd3b6329c3e5f4a90ac3d7f87ffa7867073
net/mlx5: Split the load/unload flow into hardware and software flows
- 4525abeaae54560254a1bb8970b3d4c225d32ef4
net/mlx5: Expose command polling interface
Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch accumulates the following Linux commits:
- 04c0c1ab38e95105d950db5b84e727637e149ce7
net/mlx5: PCI error recovery health care simulation
- 0179720d6be2096b8d0a4d143254ff9e77747daa
net/mlx5: Introduce trigger_health_work function
- 3fece5d676939f42f434c63dfe1bd42d7d94e6f0
net/mlx5: Continue health polling until it is explicitly stopped
Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Bring #includes closer to style(9) and reduce differences between the
(three) MD versions of linux_machdep.c and linux_sysvec.c.
Sponsored by: Turing Robotic Industries Inc.
The mlx5e_destroy_ifp() function may be called from the system workqueue and
in this case trying to flush all works will cause a dead lock.
Instead of using the system workqueue, create a designated workqueue
for each mlx5en(4) device instance.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
have one pending. Otherwise, we can race and send two, which is
wasteful in close proximity. It can also cause the acaquire/release
count for TUR to be > 1, which is undexpected.
PR: 226510
Differential Review: https://reviews.freebsd.org/D14792
i386 was changed to only require critical section around the thread
FPU state manipulations, and vm86_bioscall callers already enter
critical section for other reasons.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Mark the table with PNP info.
Fix compilation by returning FILTER_STRAY in two places, as suggested by comments.
Create a simple module from this. Left unconnected because I can't test it as a module.
Many licenses on Linuxolator files contained small variations from the
standard FreeBSD license text. To avoid license proliferation switch to
the standard 2-Clause FreeBSD license for those files where I have
permission from each of the listed copyright holders.
Approved by: rdivacky, marcel
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The mps(4) and mpr(4) drivers and hardware handle T10 Protection
Information, which is a system of checksums and guard blocks to protect
data while it is being transferred and while it is on disk. It is also
known as T10 DIF. For more details, see section 4.22 of the SBC-4 spec.
Supporting Type 2 protection requires using 32 byte CDBs, and filling in
the fields in those CDBs. We don't yet support that in the da(4) driver.
Type 1 and Type 3 protection don't require that, and can be handled by
the mps(4)/mpr(4) driver's code and firmware without any additional
input from the da(4) driver.
If a drive has Type 2 protection enabled (you frequently see this with
SAS drives shipped from Dell), don't set the various EEDP fields in the
mps(4)/mpr(4) driver command fields. Otherwise, you wind up with errors
like this that would otherwise make no sense:
(da9:mpr0:0:18:0): READ(10). CDB: 28 00 00 00 00 00 00 02 00 00
(da9:mpr0:0:18:0): CAM status: SCSI Status Error
(da9:mpr0:0:18:0): SCSI status: Check Condition
(da9:mpr0:0:18:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(da9:mpr0:0:18:0):
(da9:mpr0:0:18:0): Field Replaceable Unit: 0
(da9:mpr0:0:18:0): Command Specific Info: 0
(da9:mpr0:0:18:0):
(da9:mpr0:0:18:0): Descriptor 0x80: f8 21
(da9:mpr0:0:18:0): Descriptor 0x81: 00 00 00 00 00 00
(da9:mpr0:0:18:0): Error 22, Unretryable error
In other words, what kind of strange SAS hard drive doesn't support a
standard 10 byte SCSI READ command? In this case, one that has Type 2
protection enabled.
We can revisit this when we put Type 2 protection support in the da(4)
driver, but for now this will help people who put Type 2 formatted drives
in a system and wonder what in the world is going on.
MFC after: 3 days
Sponsored by: Spectra Logic
endpoints. The Allwinner driver will need to set this as the EPINFO
register isn't useful there.
Submitted by: jmcneill
Reviewed by: hselasky
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D5881
vdev_dbgmsg_print_tree printed vdev_id of uint64_t type with %u format
specifier. That caused subsequent parameters to be incorrectly read
from the stack and lead to a crash when a wrong value was interpreted as
a string pointer.
This should be upstreamed.
Reported by: pho
MFC after: 3 days
It can be used to validate basic algorithm correctness on a variety of inputs,
by comarison to openssl.
While here, add some sanity to the crypto/Makefile.
The tool may not be perfect, but getting it in tree where collaboration can
happen is a nice first step. The pace of development outside of svn seems
to have slowed down mid-2017.
Obtained from: github bsdjhb/freebsd:cryptocheck
Sponsored by: Dell EMC Isilon
--- vm_reserv.o ---
In file included from /opt/src/svn-current/sys/vm/vm_reserv.c:48:
In file included from /opt/src/svn-current/sys/sys/counter.h:37:
./machine/counter.h:174:3: error: implicit declaration of function
'critical_enter' is invalid in C99 [-Werror,-Wimplicit-function-declarat
ion]
critical_enter();
Reviewed by: jeff@
There's no real annotation for it, so it's not immediately obvious to the
unfamiliar that these pointers are to locations in the EFI runtime map
unlike the system table pointer immediately above them.
illumos/illumos-gate@edc8ef7d92
Reviewed by: C Fraire <cfraire@me.com>
Reviewed by: Andy Fiddaman <omnios@citrus-it.co.uk>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Author: Toomas Soome <tsoome@me.com>
In pursuit of improving performance on multi-core systems, we should
implements fanned out counters and use them to improve the performance of
some of the arc statistics. These stats are updated extremely frequently,
and can consume a significant amount of CPU time.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
In pursuit of improving performance on multi-core systems, we should
implements fanned out counters and use them to improve the performance of
some of the arc statistics. These stats are updated extremely frequently,
and can consume a significant amount of CPU time.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
Created GET_PKTOPT_EXT_HDR() and GET_PKTOPT_SOCKADDR() macros to
handle safely fetching options from in6p_outputopts, including
properly dealing with in6p locking and preparing memory for
sooptcopyout().
Changed the function signature of ip6_getpcbopt() to allow the
function to acquire and release locks on in6p as needed.
Submitted by: Jason Eggleston <jason@eggnet.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14619
bhnd_nv_strdup/bhnd_nv_strndup.
If malloc(9) failed during initial bhnd(4) attach, while allocating the root
NVRAM path string ("/"), the returned NULL pointer would be passed as the
destination to memcpy().
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
the task context.
shutdown_nice() is used from the fast interrupt handlers, mostly for
console drivers, where we cannot lock blockable locks. Schedule the
task in the fast queue to send the signal from the proper context.
Reviewed by: imp
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
ptrace_xstate_info).
struct ptrace_xstate_info has 64bit member but ends up with 32bit
one. As result, on amd64 there is a 32bit padding at the end, but not
on i386.
We must clear the padding before doing the copyout. For compat32 case,
we must copyout the structure which does not have the padding at the
end. The later fixes 32bit gdb display of the YMM registers when
running on amd64 kernel.
Reported by: Vlad Tsyrklevich
Reviewed by: brooks (previous version)
Sponsored by: The FreeBSD Foundation
admbugs: 765
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14794
vmd_free_count with atomics.
This allows us to allocate and free from reservations without the free lock
except where a superpage is allocated from the physical layer, which is
roughly 1/512 of the operations on amd64.
Use the counter api to eliminate cache conention on counters.
Reviewed by: markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14707
Don't treat .symver as a regular alias definition.
This patch starts simplifying the handling of .symver.
For now it just moves the responsibility for creating an alias down to
the streamer. With that the asm streamer can pass a .symver unchanged,
which is nice since gas cannot parse "foo@bar = zed".
In a followup I hope to move the handling down to the writer so that
we don't need special hacks for avoiding breaking names with @@@ on
windows.
Pull in r327160 from upstream llvm trunk (by Rafael Espindola):
Delay creating an alias for @@@.
With this we only create an alias for @@@ once we know if it should
use @ or @@. This avoids last minutes renames and hacks to handle MS
names.
This only handles the ELF writer. LTO still has issues with @@@
aliases.
Pull in r327928 from upstream llvm trunk (by Vitaly Buka):
Object: Move attribute calculation into RecordStreamer. NFC
Summary: Preparation for D44274
Reviewers: pcc, espindola
Subscribers: hiraditya
Differential Revision: https://reviews.llvm.org/D44276
Pull in r327930 from upstream llvm trunk (by Vitaly Buka):
Object: Fix handling of @@@ in .symver directive
Summary:
name@@@nodename is going to be replaced with name@@nodename if symbols is
defined in the assembled file, or name@nodename if undefined.
https://sourceware.org/binutils/docs/as/Symver.html
Fixes PR36623
Reviewers: pcc, espindola
Subscribers: mehdi_amini, hiraditya
Differential Revision: https://reviews.llvm.org/D44274
Together, these changes fix handling of @@@ in .symver directives when
doing Link Time Optimization.
Reported by: Shawn Webb <shawn.webb@hardenedbsd.org>
MFC after: 3 months
X-MFC-With: r327952
On amd64, efi_enter calls fpu_kern_enter(). This may not be called until
fpuinitstate has been invoked, resulting in a kernel panic with
efirt_load="YES" in loader.conf(5).
Move fpuinitstate a little earlier in SI_SUB_DRIVERS so that we can squeeze
efirt between it and efirtc at SI_SUB_DRIVERS, SI_ORDER_ANY. efidev must be
after efirt and doesn't really need to be at SI_SUB_DEVFS, so drop it at
SI_SUB_DRIVER, SI_ORDER_ANY.
The not immediately obvious dependency of fpuinitstate by efirt has been
noted in both places.
Discussed with: kib, andrew
Reported by: Jakob Alvermark <jakob@alvermark.net>
X-MFC-With: r330868
