Zero can be confused for a potentially valid value.
For example, if I load and unload sbp driver I get a lot of messages
like the following:
fw_tl_free: the xfer is not in the queue (tlabel=0, flag=0x0)
send: dst=0x00 tl=0x00 rt=0 tcode=0x0 pri=0x0 src=0x000
recv: dst=0x01 tl=0x21 rt=1 tcode=0x1 pri=0x0 src=0xffc0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe04464407e0
fw_tl_free() at fw_tl_free+0x18d/frame 0xfffffe0446440820
fw_xfer_unload() at fw_xfer_unload+0xca/frame 0xfffffe0446440840
fw_xferlist_remove() at fw_xferlist_remove+0x2f/frame 0xfffffe0446440870
sbp_detach() at sbp_detach+0x1e0/frame 0xfffffe04464408e0
device_detach() at device_detach+0x80/frame 0xfffffe0446440900
devclass_driver_deleted() at devclass_driver_deleted+0x6a/frame 0xfffffe0446440940
devclass_delete_driver() at devclass_delete_driver+0x7d/frame 0xfffffe0446440980
driver_module_handler() at driver_module_handler+0xff/frame 0xfffffe04464409d0
module_unload() at module_unload+0x32/frame 0xfffffe04464409f0
linker_file_unload() at linker_file_unload+0x24b/frame 0xfffffe0446440a40
kern_kldunload() at kern_kldunload+0xbc/frame 0xfffffe0446440a70
amd64_syscall() at amd64_syscall+0x314/frame 0xfffffe0446440bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0446440bf0
MFC after: 2 weeks
Please see section 5.15 of 1394 OHCI Specification.
If the register is not implemented, then the physical response unit is
limited to the first 4GB of the physical memory.
In that case the non-cooperative debugging over firewire (using /dev/fwmem)
can not be expected to work if a target has more RAM than that.
The method is described in gdb.4 and the Developer's Handbook.
It seems that most of the consumer hardware does not implement
PhysicalUpperBound register.
MFC after: 1 week
It was very wrong to look at the vnode and znode internals without
having locked the vnode first.
Reported by: pho
Tested by: pho
MFC after: 1 week
X-MFC with: r308887
Since hypervisor will not drain the TX bufring, once the channels are
revoked:
- Setup vmbus orphan handler properly.
- Make sure that suspension will not wait the TX bufring draining
forever.
- GC the pending TX descs on detach path, before freeing the busdma
stuffs.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8559
- Reference count the sub-channel when channel offer message is
processed, so that immediate rescind message on the same channel
will not race sub-channel open on driver side.
- Drop the above reference when sub-channel is closed, this closely
mimics the hypervisor's reaction when primary channel is closed
on the VM side. No drivers use sub-channel after primary channel
is closed.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8546
Drivers can now use vmbus_chan_{is_revoked,set_orphan,unset_orphan}() and
vmbus_xact_ctx_orphan() to fix their attach/detach DEVMETHODs for revoked
primary channels.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8545
It will be used to fix the primary channel revocation support.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8525
Now that BCM283x source are buildable with SMP option it cam be moved to
GENERIC SMP config. SMP itself does not work on RPi3 yet due to lack of
PSCI monitor which is work in progress at the moment
The size can be changed by side effect of modifying kern.maxvnodes.
Since numbucketlocks was not modified, setting a sufficiently low value
would give more locks than actual buckets, which would then lead to
corruption.
Force the number of buckets to be not smaller.
Note this should not matter for real world cases.
Reported and tested by: pho
UEXT are Universal EXTension connector from Olimex. They embed i2c, spi
and uart pins along power in one connector and are found on most,
if not all, Olimex boards.
The Olimex A20 SOM EVB have two UEXT connector so enable the nodes found on
those two connectors.
Patch has been applied upstream, in the meantime add the nodes to our custom
DTS.
The swap pager enqueues laundered pages near the head of the inactive queue
to avoid another trip through LRU before reclamation. This change adds
support for this behaviour to the vnode pager and makes use of it in UFS and
ext2fs. Some ioflag handling is consolidated into a common subroutine so
that this support can be easily extended to other filesystems which make use
of the buffer cache. No changes are needed for ZFS since its putpages
routine always undirties the pages before returning, and the laundry
thread requeues the pages appropriately in this case.
Reviewed by: alc, kib
Differential Revision: https://reviews.freebsd.org/D8589
These functions are only used by management stuffs, so there are
no needs to introduce extra complexity.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8524
This will be used to fix device detach DEVMETHOD for revoked primary
channel.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8522
Minimal impact, would allow selection of LR media when KR is connected.
Reported by: Coverity
Approved by: davidch
MFC after: 7 days
Sponsored by: Broadcom Limited
longer used. More precisely, they are always zero because the code that
decremented and incremented them no longer exists.
Bump __FreeBSD_version to mark this change.
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8583
an invalid address. It is also unneeded on arm64 as we use the ARM Generic
Timer driver.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
TODO:
* drink real coffee before committing in the morning, or there's a high
risk of more obviously self-evident commits being turned into attempts
at humour.
Reported by: cem, Coverity CID 1366219
See r294954 for the bread(9) change and r297401 for similar cd9660 fix.
Reported and tested by: Joshua Kinard <kumba@gentoo.org>
PR: 214705
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The pager, due to its construction, implements clustering for the
page-ins. In particular, buildworld load demonstrates reduction of
the READ RPCs from 39k down to 24k. No change in real or CPU time was
observed.
Discussed with, and measured by: bde
No objections from: rmacklem
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This just stores pointers to the IE; it doesn't yet parse anything.
Note: it blows out the size of ieee80211_node, so this will require
ye olde kernel/modules recompile.
* Obey the peer A-MPDU density if it's larger than the currently configured
one.
* Pay attention to the peer A-MPDU max-size and don't assume we can transmit
a full A-MPDU (64k!) if the peer announces smaller values.
Relnotes: ath(4): Fix A-MPDU transmit; obey A-MPDU density and max size.
* Pepper comments around which describe what state(s) we're in when faking
up 11n nodes.
* By default don't fake it up as 11n until we properly negotiate the 11n
capabilities using probe request/response frames.
* Send a probe request with our HT information, as the 802.11-2012 spec
suggests.
* Reassociate with the driver if we've been promoted.
This is done because although learning a peer via beacons can learn 11n
state, learning peers via hearing probe frames and broadcast frames
does not. Thus, sometimes you end up with an 11n peer in the peer
table and sometimes you don't.
Note that the probe request/response exchange may not actually succeed.
Ideally we'd put the peer into some blocking state until we've exchanged
probe request/reponse to learn capabilities, or we timeout and just
stay non-11n.
This is more an experiment to get 11n IBSS nodes actually discovering
each other and be able to transmit. There are other issues that creep
up which I'll attempt to address in future commits.
Tested:
* AR9380 NICs in 11n mode.
Reviewed by: avos
Differential Revision: https://reviews.freebsd.org/D8365
This avoids the time-warp after kthreads have started running and the
required fixup to td_slptick and td_blktick in the EARLY_AP_STARTUP
case. Now, 'ticks' is initialized before any kthreads are created or
any context switches are performed.
Tested by: gavin
MFC after: 2 weeks
Sponsored by: Netflix
always audit the file-descriptor number and vnode information for all
fnctl(2) commands, not just locking-related ones. This was likely an
oversight in the original adaptation of this code from XNU.
MFC after: 3 days
Sponsored by: DARPA, AFRL
many borken middle-boxes tend to do that. But during 3whs, in syncache_expand(),
we don't do that which causes us to send a RST to such a client. Relax this
constraint by only using tsecr to compare against timestamp that we sent when it
is not 0. As a result, we'd now accept the final ACK of 3whs with tsecr of 0.
Reviewed by: jtl, gnn
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D8552
