kthread_add() takes the same parameters as the old kthread_create()
plus a pointer to a process structure, and adds a kernel thread
to that process.
kproc_kthread_add() takes the parameters for kthread_add,
plus a process name and a pointer to a pointer to a process instead of just
a pointer, and if the proc * is NULL, it creates the process to the
specifications required, before adding the thread to it.
All other old kthread_xxx() calls return, but act on (struct thread *)
instead of (struct proc *). One reason to change the name is so that
any old kernel modules that are lying around and expect kthread_create()
to make a process will not just accidentally link.
fix top to show kernel threads by their thread name in -SH mode
add a tdnam formatting option to ps to show thread names.
make all idle threads actual kthreads and put them into their own idled process.
make all interrupt threads kthreads and put them in an interd process
(mainly for aesthetic and accounting reasons)
rename proc 0 to be 'kernel' and it's swapper thread is now 'swapper'
man page fixes to follow.
test MK_INSTALLLIB, users can set WITHOUT_INSTALLLIB. The old
NO_INSTALLLIB is still supported as several makefiles set it.
- While here, fix an install when instructed not to install libs
(usr.bin/lex/lib/Makefile).
PR: bin/114200
Submitted by: Henrik Brix Andersen
At least one port (net-mgmt/net-snmp) creates man-pages which are
in the format:
.SH NAME
The Net-SNMP agent \- The snmp agent responds to SNMP queries from management stations.
.PP
.SS "Modules"
At this moment, makewhatis determines the end of the .SH NAME section
as where it finds .SH again, but there is none here, is it "terminated"
by the .SS.
PR: bin/116706
Submitted by: edwin@
Approved by: re (Ken Smith), grog (mentor)
MFC after: 1 week
support for wide characters.
If the sizeof (wchar_t) times max_length would yield a value beyond
representation in a size_t, exit with a usage error up front, rather than
strange errors down the line from trying to malloc (well, realloc) with a size
of 0.
This is perhaps not the optimal behaviour - a clamp may be more appropriate as
we clamp the value of max_length now anyway, but this is at least better than
segfaulting or worse. On systems which are friendly to malloc with a value of 0
the results could end up being strange corruption of the output.
since "local" includes also synthetic file systems (e.g. /dev, /proc)
and loopback mounts.
This version uses lsvfs to identify file system types that are local
and additionally not synthetik, loopback mounts, or read-only. This
has been suggested by Craig Rodrigues half a year ago. The patch that
has been committed is based on his suggestion, but slightly modified.
The comments in locate.rc have been updated to reflect the change and
o include zfs and xfs in the example file system parameter that can
be used to override the default outlined above.
PR: 114101
Submitted by: rodrigc at crodrigues dot org (Craig Rodrigues)
MFC: 2 weeks
inspect all local file systems, not only ufs and ext2fs. A number
of local file systems has been added over time, and at least zfs
has the potential to become a popular choice. Without this change
a ZFS root file system causes the script to ignore all file-systems
and leads to an empty locate db. (An alternative is to add all the
relevant file systems individually, which means that at least zfs,
xfs, ntfs, ntfs-3g, msdosfs should be added, probably more).
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
them (for example when they have logged in from an ip6 source).
- Stick with the initial call to getaudit(2), if it returns E2BIG, use
getaudit_addr(2) instead and set the "extended" flag to indicate that
we the calling credential has an extended subject state.
- Additionally, add the printing of the machine/at_addr (the ip/ip6
addresses)
MFC after: 1 week
Obtained from: TrustedBSD Project
lock experienced contention a number of processes would race to acquire
lock when it was released. This problem resulted in a lot of CPU
load as well as locks being picked up out of order.
Unfortunately, a regression snuck in which allowed multiple threads
to pickup the same lock when -k was not used. This could occur when
multiple processes open a file descriptor to inode X (one process
will be blocked) and the file is unlinked on unlock (thereby removing
the directory entry allow another process to create a new directory
entry for the same file name and lock it).
This changes restores the old algorithm of: wait for the lock, then
acquire lock when we want to unlink the file on exit (specifically
when -k is not used) and keeps the new algorithm for when -k is used,
which yields fairness and improved performance.
Also, update the man page to inform users that if lockf(1) is being
used to facilitate concurrency between a number of processes, it
is recommended that -k be used to reduce CPU load and yeld
fairness with regard to lock ordering.
Collaborated with: jdp
PR: bin/114341
PR: bin/116543
PR: bin/111101
MFC after: 1 week
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
have real idle processes for that.
- Fix the display on SMP by not scaling the sum of %CPU down
to 1. Instead, display raw data as computed by the kernel,
like in top(1).
Reviewed by: bde
Approved by: re (bmah)
MFC after: 1 week
of threaded RPC servers to work out of the box.
Spotted by: Changming Sun <changming at staff.sina.com.cn>
Sponsored by: SINA Corporation
Approved by: re (kensmith)
<netinet/tcp_fsm.h> is included into any compilation unit that needs
tcpstates[]. Also remove incorrect extern declarations and TCPDEBUG
conditionals. This allows kernels both with and without TCPDEBUG to
build, and unbreaks the tinderbox.
Approved by: re (rwatson)
containing 64-bit arguments would have explicit padding.
On 64-bit platforms there was no padding, so the dummy
argument was not covering anything. On 32-bit platforms
with weak alignment (i.e. i386) the 64-bit argument did
not need to be aligned, so there too an aditional argument
was introduced. On 32-bit platforms with strong alignment
(i.e. PowerPC) the dummy argument in fact cover the padding.
By elimininating the dummy argument, 64-bit platforms now
have 1 argument less. This also applies to 32-bit platforms
with weak alignment. On PowerPC this doesn't matter, because
the padding is still there. We just don't "name" it.
Deal with those 3 cases.
Approved by: re (kensmith)
general, when support was added to netstat for fetching data using sysctl,
no provision was left for fetching equivalent data from a core dump, and
in fact, netstat would _always_ fetch data from the live kernel using
sysctl even when -M was specified resulting in the user believing they
were getting data from coredumps when they actually weren't. Some specific
changes:
- Add a global 'live' variable that is true if netstat is running against
the live kernel and false if -M has been specified.
- Stop abusing the sysctl flag in the protocol tables to hold the protocol
number. Instead, the protocol is now its own field in the tables, and
it is passed as a separate parameter to the PCB and stat routines rather
than overloading the KVM offset parameter.
- Don't run PCB or stats functions who don't have a namelist offset if we
are being run against a crash dump (!live).
- For the inet and unix PCB routines, we generate the same buffer from KVM
that the sysctl usually generates complete with the header and trailer.
- Don't run bpf stats for !live (before it would just silently always run
live).
- kread() no longer trashes memory when opening the buffer if there is an
error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX.
- The multicast routing code doesn't fallback to kvm on live kernels if
the sysctl fails. Keeping this made the code rather hairy, and netstat
is already tied to the kernel ABI anyway (even when using sysctl's since
things like xinpcb contain an inpcb) so any kernels this is run against
that have the multicast routing stuff should have the sysctls.
- Don't try to dig around in the kernel linker in the netgraph PCB routine
for core dumps.
Other notes:
- sctp's PCB routine only works on live kernels, it looked rather
complicated to generate all the same stuff via KVM. Someone can always
add it later if desired though.
- Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered.
- Use sysctlbyname() everywhere rather than hardcoded mib values.
MFC after: 1 week
Approved by: re (rwatson)
