If we have a 'set skip on <ifgroup>' rule this flag it set on the group
kif, but must also be set on all members. pfctl does this when the rules
are set, but if groups are added afterwards we must also apply the flags
to the new member. If not, new group members will not be skipped until
the rules are reloaded.
Reported by: dvl@
Reviewed by: glebius@
Differential Revision: https://reviews.freebsd.org/D23254
Instead of waiting for pc_curthread which is overwritten by
init_secondary_tail(), wait for non-NULL pc_curpcb, to be set by the
first context switch.
Assert that pc_curpcb is not set too early.
Reported and tested by: rlibby
Reviewed by: markj, rlibby
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23330
ng_nat implements NAT for IPv4 traffic only. When connected to an
ng_ether node it erroneously handled IPv6 packets as well.
This change is not sufficient: ng_nat does not do any validation of IP
packets in this mode, even though they have not yet passed through
ip_input().
PR: 243096
Reported by: Robert James Hernandez <rob@sarcasticadmin.com>
Reviewed by: julian
Differential Revision: https://reviews.freebsd.org/D23080
A submap can only be created from an entry spanning the entire request
range. In particular, if vm_map_lookup_entry() returns false or the
returned entry contains "end".
Since the only use of submaps in FreeBSD is for the static pipe and
execve argument KVA maps, this has no functional effect.
Github PR: https://github.com/freebsd/freebsd/pull/420
Submitted by: Wuyang Chung <wuyang.chung1@gmail.com> (original)
Reviewed by: dougm, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23299
After r355784 we no longer hold a thread's thread lock when switching it
out. Preserve the previous synchronization protocol for td_oncpu by
setting it together with td_state, before dropping the thread lock
during a switch.
Reported and tested by: pho
Reviewed by: kib
Discussed with: jeff
Differential Revision: https://reviews.freebsd.org/D23270
Doing so can cause deadlocks or panics during boot, if an interrupt
handler accesses uninitialized per-CPU scheduler structures. This seems
to occur frequently when running under QEMU or AWS. The idle threads
are set up to release a spinlock section and enable interrupts in
fork_exit(), so there is no need to enable interrupts earlier.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23328
From r355819:
Repeat the spinlock_enter/exit pattern from amd64 on other architectures
to fix an assert violation introduced in r355784. Without this
spinlock_exit() may see owepreempt and switch before reducing the
spinlock count. amd64 had been optimized to do a single critical
enter/exit regardless of the number of spinlocks which avoided the
problem and this optimization had not been applied elsewhere.
This is completely untested - I have no obsolete Sparc hardware - but
someone did try testing recent changes on sparc64 (PR 243534).
PR: 243534
We observe at least one problem: if a UDP socket is connect(2)-ed, then a
received packet that matches the connection cannot be matched to the
corresponding PCB because of an incorrect flow ID. That was oberved for DNS
requests from the libc resolver. We got this problem because FreeBSD
r343291 enabled code that can set rsstype of received packets to values
other than M_HASHTYPE_OPAQUE_HASH. Earlier that code was under 'ifdef
notyet'.
The essence of this change is to use the system-wide RSS key instead of
some historic hardcoded key when the software RSS is enabled and it is
configured to use Toeplitz algorithm (the default).
In all other cases, the driver reports the opaque hash type for received
packets while still using Toeplitz algorithm with the internal key.
PR: 242890
Reviewed by: pkelsey
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D23147
This bus does not really have a concept of the initiator ID, so use
a guaranteed dummy one that won't conflict with any real target.
This change fixes a problem with virtio_scsi on GCE where disks get
sequential target IDs starting from one. If there are seven or more
disks, then a disk with the target ID of seven would not be discovered
by FreeBSD as that ID was reserved as the initiator ID -- see
scsi_scan_bus().
Discussed with: bryanv
MFC after: 2 weeks
Sponsored by: Panzura
within epoch.
Simplify gigantic div_output() by splitting it into 3 functions,
handling preliminary setup, remote "ip[6]_output" case and
local "netisr" case. Leave original indenting in most parts to ease
diff comparison. Indentation will be fixed by a followup commit.
Reported by: Nick Hibma <nick at van-laarhoven.org>
Reviewed by: glebius
Differential Revision: https://reviews.freebsd.org/D23317
Add a new VM return code KERN_RESTART which means, deallocate and restart in
fault.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D23303
This additionally fixes a potential bug/pessimization where we could fail to
reload the original fault_type on restart.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D23301
UMA zone structures have two arrays at the end which are sized according
to the machine: an array of CPU count length, and an array of NUMA
domain count length. The CPU counting was wrong in the case where some
CPUs are disabled (when mp_ncpus != mp_maxid + 1), and this caused the
second array to be overlaid with the first.
Reported by: olivier
Reviewed by: jeff, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23318
Previously UMA had some false negatives in the leak report at keg
destruction time, where it only reported leaks if there were free items
in the slab layer (rather than allocated items), which notably would not
be true for single-item slabs (large items). Now, report a leak if
there are any allocated pages, and calculate and report the number of
allocated items rather than free items.
Reviewed by: jeff, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23275
it. The introduction of lockless switch in r355784 created a race to
re-use the exiting thread that was only possible to hit on a hypervisor.
Reported/Tested by: rlibby
Discussed with: rlibby, jhb
supposedly may call into ether_input() without network epoch.
They all need to be reviewed before 13.0-RELEASE. Some may need
be fixed. The flag is not planned to be used in the kernel for
a long time.
In upcoming changes ether_input() is going to be changed not
to enter the network epoch. It is going to be responsibility
of network interrupt. In case of iflib - its taskqueue.
Intel Speed Shift is Intel's technology to control frequency in hardware,
with hints from software.
Let's get a working version of this in the tree and we can refine it from
here.
Submitted by: bwidawsk, scottph
Reviewed by: bcr (manpages), myself
Discussed with: jhb, kib (earlier versions)
With feedback from: Greg V, gallatin, freebsdnewbie AT freenet.de
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18028
All of the in-tree architectures not supported by in-tree binutils are
supported by lld, so the condition is now always false. It also
didn't fully work since the external binutils are installed into a
directory that uses the host's OS version, not the target OS version.
Reviewed by: emaste, imp
Differential Revision: https://reviews.freebsd.org/D23294
As of r356974 calls to ip_output() require us to be in the network epoch.
That wasn't the case for the calls done from pfsyncintr() and
pfsync_defer_tmo().
Those interfaces may implicitly change their MTU on addition of parent
interface in addition to normal SIOCSIFMTU ioctl path, where the route
MTUs are updated normally.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
/etc/termcap is a symlink to /usr/share/misc/termcap, which is in the
runtime package. Tag the symlink with the same package so that it is
handled correctly on pkgbase-installed/updated systems.
Sponsored by: The FreeBSD Foundation
