Requested ID should be validated when the packet is received and not
when the driver is repopulating the mbufs.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
MFC after: 1 week
This commit essentially has three parts:
* Add the AES-CCM encryption hooks. This is in and of itself fairly small,
as there is only a small difference between CCM and the other ICM-based
algorithms.
* Hook the code into the OpenCrypto framework. This is the bulk of the
changes, as the algorithm type has to be checked for, and the differences
between it and GCM dealt with.
* Update the cryptocheck tool to be aware of it. This is invaluable for
confirming that the code works.
This is a software-only implementation, meaning that the performance is very
low.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D19090
This adds the CBC-MAC code to the kernel, but does not hook it up to
anything (that comes in the next commit).
https://tools.ietf.org/html/rfc3610 describes the algorithm.
Note that this is a software-only implementation, which means it is
fairly slow.
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D18592
The previous fix was unnecessarily very slow up to 105 hours where the
simple formula used previously worked, and unnecessarily slow by a factor
of about 5/3 up to 388 days, and didn't work above 388 days. 388 days is
not a long time, since it is a reasonable uptime, and for processes the
times being calculated are aggregated over all threads, so with N CPUs
running the same thread a runtime of 388 days is reachable after only
388 / N physical days.
The PRs document overflow at 388 days, but don't try to fix it.
Use the simple formula up to 76 hours. Then use a complicated general
method that reduces to the simple formula up to a bit less than 105
hours, then reduces to the previous method without its extra work up
to almost 388 days, then does more complicated reductions, usually
many bits at a time so that this is not slow. This works up to half
of maximum representable time (292271 years), with accumulated rounding
errors of at most 32 usec.
amd64 can do all this with no avoidable rounding errors in an inline
asm with 2 instructions, but this is too special to use. __uint128_t
can do the same with 100's of instructions on 64-bit arches. Long
doubles with at least 64 bits of precision are the easiest method to
use on i386 userland, but are hard to use in the kernel.
PR: 76972 and duplicates
Reviewed by: kib
Don't use a struct if_irq for IFLIB_INTR_IOV type interrupts since that results
in get_core_offset() being called on them, and get_core_offset() doesn't
handle IFLIB_INTR_IOV type interrupts, which results in an assert() being triggered
in iflib_irq_set_affinity().
PR: 235730
Reported by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 1 day
Sponsored by: Intel Corporation
Make the clustering enabling knob more fine-grained by providing a
setting where the allocation with hint is not clustered. This is aimed
to be somewhat more compatible with e.g. go 1.4 which expects that
hinted mmap without MAP_FIXED does not change the allocation address.
Now the vm.cluster_anon can be set to 1 to only cluster when no hints,
and to 2 to always cluster. Default value is 1.
Requested by: peter
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D19194
When sigreturn() restored a thread's context, SRR1 was being restored
to its previous value, but pcb_flags was not being touched.
This could cause a mismatch between the thread's MSR and its pcb_flags.
For instance, when the thread used the FPU for the first time inside
the signal handler, sigreturn() would clear SRR1, but not pcb_flags.
Then, the thread would return with the FPU bit cleared in MSR and,
the next time it tried to use the FPU, it would fail on a KASSERT
that checked if the FPU was disabled.
This change clears the FPU bit in both pcb_flags and frame->srr1,
as the code that restores the context expects to use the FPU trap
to re-enable it.
PR: 234539
Reported by: sbruno
Reviewed by: jhibbits, sbruno
Differential Revision: https://reviews.freebsd.org/D19166
In particular, use ifuncs for __getcontextx_size(), also calculate the
size of the extended save area in resolver. Same for __fillcontextx2().
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Some older compilers, when generating PIC code, cannot handle inline
asm that clobbers %ebx (because %ebx is used as the GOT offset
register). Userspace versions avoid clobbering %ebx by saving it to
stack before executing the CPUID instruction.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
[MC] Make symbol version errors non-fatal
We stil don't have a source location, which is pretty lame, but at
least we won't tell the user to file a clang bug report anymore.
Fixes PR40712
This will make errors for symbols with @@ versions that are not defined
non-fatal. For example:
void f(void)
{
__asm__(".symver foo,bar@@baz");
}
will now result in:
error: versioned symbol bar@@baz must be defined
instead of clang crashing with a diagnostic report.
PR: 234671
Upstream PR: https://bugs.llvm.org/show_bug.cgi?id=40712
MFC after: 3 days
This reduces the overhead of TLB invalidations by ensuring that we
only interrupt CPUs which are using the given pmap. Tracking is
performed in pmap_activate(), which gets called during context switches:
from cpu_throw(), if a thread is exiting or an AP is starting, or
cpu_switch() for a regular context switch.
For now, pmap_sync_icache() still must interrupt all CPUs.
Reviewed by: kib (earlier version), jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18874
This includes support for pmap_enter(..., psind=1) as described in the
commit log message for r321378.
The changes are largely modelled after amd64. arm64 has more stringent
requirements around superpage creation to avoid the possibility of TLB
conflict aborts, and these requirements do not apply to RISC-V, which
like amd64 permits simultaneous caching of 4KB and 2MB translations for
a given page. RISC-V's PTE format includes only two software bits, and
as these are already consumed we do not have an analogue for amd64's
PG_PROMOTED. Instead, pmap_remove_l2() always invalidates the entire
2MB address range.
pmap_ts_referenced() is modified to clear PTE_A, now that we support
both hardware- and software-managed reference and dirty bits. Also
fix pmap_fault_fixup() so that it does not set PTE_A or PTE_D on kernel
mappings.
Reviewed by: kib (earlier version)
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18863
Differential Revision: https://reviews.freebsd.org/D18864
Differential Revision: https://reviews.freebsd.org/D18865
Differential Revision: https://reviews.freebsd.org/D18866
Differential Revision: https://reviews.freebsd.org/D18867
Differential Revision: https://reviews.freebsd.org/D18868
But ipsec_delete_pcbpolicy() uses some VNET-virtualized variables,
and thus it needs VNET context, that is missing during gtaskqueue
executing. Use inp_vnet context to set curvnet in in_pcbfree_deferred().
PR: 235684
MFC after: 1 week
ratelimiting code. The two modules (lagg and vlan) did have
allocation routines, and even though they are indirect (and
vector down to the underlying interfaces) they both need to
have a free routine (that also vectors down to the actual interface).
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D19032
be_destroy is documented to recursively destroy a boot environment. In the
case of snapshots, one would take this to mean that these are also
recursively destroyed. However, this was previously not the case.
be_destroy would descend into the be_destroy callback and attempt to
zfs_iter_children on the top-level snapshot, which is bogus.
Our alternative approach is to take note of the snapshot name and iterate
through all of fs children of the BE to try destruction in the children.
The -o option is also fixed to work properly with deep BEs. If the BE was
created with `bectl create -e otherDeepBE newDeepBE`, for instance, then a
recursive snapshot of otherDeepBE would have been taken for construction of
newDeepBE but a subsequent destroy with BE_DESTROY_ORIGIN set would only
clean up the snapshot at the root of otherDeepBE: ${BEROOT}/otherDeepBE@...
The most recent iteration instead pretends not to know how these things
work, verifies that the origin is another BE and then passes that back
through be_destroy to DTRT when snapshots and deep BEs may be in play.
MFC after: 1 week
Newer cores have the 'tlbilx' instruction, which doesn't broadcast over
CoreNet. This is significantly faster than walking the TLB to invalidate
the PID mappings. tlbilx with the arguments given takes 131 clock cycles to
complete, as opposed to 512 iterations through the loop plus tlbre/tlbwe at
each iteration.
MFC after: 3 weeks
The panic message lead people to believe some userland CAM request had
caused a problem when in reallity it was for a kernel request (eg the
USER bit was cleared). Reword message. Also, improve a couple of
comments to reflect that the periph shouldn't be completely torn down
before we get here (so the path and sim pointers should be valid, but
aren't and the code is designed to be robust enough in the face of
that to give a specific panic message).
Set up zpools with a more unique name, stash the zpool name away in a file pointed
to by `$ZPOOL_NAME_FILE` (which is relative to a per-testcase generated temporary
directory), then remove the file based on `$ZPOOL_NAME_FILE` in the cleanup
routines.
This is a more concurrency-safe solution and will allow the testcases to be safely
executed in parallel.
Reviewed by: kevans, jtl
Approved by: jtl (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19024
This issue was noticed when running `make manlint` as part of MFCing r342597 to
^/stable/11:
```
$ make -C share/man/man8 rc.8lint
mandoc -Tascii -Tlint rc.8
mandoc: rc.8:548:6: STYLE: referenced manual not found: Xr rc.resume 8
$
```
This is a followup commit to r339818.
Reviewed by: eugen
Approved by: jtl (mentor)
MFC after: 1 week
MFC to: ^/stable/12
Differential Revision: https://reviews.freebsd.org/D19158
Sync libarchive with vendor.
Relevant vendor changes:
PR #1085: Fix a null pointer dereference bug in zip writer
PR #1110: ZIP reader added support for XZ, LZMA, PPMD8 and BZIP2
decopmpression
PR #1116: Add support for 64-bit ar format
PR #1120: Fix a 7zip crash [1] and a ISO9660 infinite loop [2]
PR #1125: RAR5 reader - fix an invalid read and a memory leak
PR #1131: POSIX reader - do not fail when tree_current_lstat() fails
due to ENOENT [3]
PR #1134: Delete unnecessary null pointer checks before calls of free()
OSS-Fuzz 10843: Force intermediate to uint64_t to make UBSAN happy.
OSS-Fuzz 11011: Avoid buffer overflow in rar5 reader
PR: 233006 [3]
Security: CVE-2019-1000019 [1], CVE-2019-1000020 [2]
MFC after: 2 weeks
Relevant vendor changes:
PR #1085: Fix a null pointer dereference bug in zip writer
PR #1110: ZIP reader added support for XZ, LZMA, PPMD8 and BZIP2
decopmpression
PR #1116: Add support for 64-bit ar format
PR #1120: Fix a 7zip crash [1] and a ISO9660 infinite loop [2]
PR #1125: RAR5 reader - fix an invalid read and a memory leak
PR #1131: POSIX reader - do not fail when tree_current_lstat() fails
due to ENOENT [3]
PR #1134: Delete unnecessary null pointer checks before calls of free()
OSS-Fuzz 10843: Force intermediate to uint64_t to make UBSAN happy.
OSS-Fuzz 11011: Avoid buffer overflow in rar5 reader
PR: 233006 [3]
Security: CVE-2019-1000019 [1], CVE-2019-1000020 [2]
So far, intr_{g,s}etaffinity(9) take a single int for identifying
a device interrupt. This approach doesn't work on all architectures
supported, as a single int isn't sufficient to globally specify a
device interrupt. In particular, with multiple interrupt controllers
in one system as found on e. g. arm and arm64 machines, an interrupt
number as returned by rman_get_start(9) may be only unique relative
to the bus and, thus, interrupt controller, a certain device hangs
off from.
In turn, this makes taskqgroup_attach{,_cpu}(9) and - internal to
the gtaskqueue implementation - taskqgroup_attach_deferred{,_cpu}()
not work across architectures. Yet in turn, iflib(4) as gtaskqueue
consumer so far doesn't fit architectures where interrupt numbers
aren't globally unique.
However, at least for intr_setaffinity(..., CPU_WHICH_IRQ, ...) as
employed by the gtaskqueue implementation to bind an interrupt to a
particular CPU, using bus_bind_intr(9) instead is equivalent from
a functional point of view, with bus_bind_intr(9) taking the device
and interrupt resource arguments required for uniquely specifying a
device interrupt.
Thus, change the gtaskqueue implementation to employ bus_bind_intr(9)
instead and intr_{g,s}etaffinity(9) to take the device and interrupt
resource arguments required respectively. This change also moves
struct grouptask from <sys/_task.h> to <sys/gtaskqueue.h> and wraps
struct gtask along with the gtask_fn_t typedef into #ifdef _KERNEL
as userland likes to include <sys/_task.h> or indirectly drags it
in - for better or worse also with _KERNEL defined -, which with
device_t and struct resource dependencies otherwise is no longer
as easily possible now.
The userland inclusion problem probably can be improved a bit by
introducing a _WANT_TASK (as well as a _WANT_MOUNT) akin to the
existing _WANT_PRISON etc., which is orthogonal to this change,
though, and likely needs an exp-run.
While at it:
- Change the gt_cpu member in the grouptask structure to be of type
int as used elswhere for specifying CPUs (an int16_t may be too
narrow sooner or later),
- move the gtaskqueue_enqueue_fn typedef from <sys/gtaskqueue.h> to
the gtaskqueue implementation as it's only used and needed there,
- change the GTASK_INIT macro to use "gtask" rather than "task" as
argument given that it actually operates on a struct gtask rather
than a struct task, and
- let subr_gtaskqueue.c consistently use __func__ to print functions
names.
Reported by: mmel
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D19139
Gratuitous ARP packets are sent from a timer, which means we don't have a vnet
context set. As a result we panic trying to send the packet.
Set the vnet context based on the interface associated with the interface
address.
To reproduce:
sysctl net.link.ether.inet.garp_rexmit_count=2
ifconfig vtnet1 10.0.0.1/24 up
PR: 235699
Reviewed by: vangyzen@
MFC after: 1 week
o Correct the obvious bugs in the netmap(4) parts:
- No longer check for the existence of DMA maps as bus_dma(9)
is used unconditionally in iflib(4) since r341095.
- Supply the correct DMA tag and map pairs to bus_dma(9)
functions (see also the commit message of r343753).
- In iflib_netmap_timer_adjust(), add synchronization of the
TX descriptors before calling the ift_txd_credits_update
method as the latter evaluates the TX descriptors possibly
updated by the MAC.
- In _task_fn_tx(), wrap the netmap(4)-specific bits in
#ifdef DEV_NETMAP just as done in _task_fn_admin() and
_task_fn_rx() respectively.
o In iflib_fast_intr_rxtx(), synchronize the TX rather than
the RX descriptors before calling the ift_txd_credits_update
method (see also above).
o There's no need to synchronize an RX buffer that is going to
be recycled in iflib_rxd_pkt_get(), yet; it's sufficient to
do that as late as passing RX buffers to the MAC via the
ift_rxd_refill method. Hence, combine that synchronization
with the synchronization of new buffers into a common spot
in _iflib_fl_refill().
o There's no need to synchronize the RX descriptors of a free
list in preparation of the MAC updating their statuses with
every invocation of rxd_frag_to_sd(); it's enough to do this
once before handing control over to the MAC, i. e. before
calling ift_rxd_flush method in _iflib_fl_refill(), which
already performs the necessary synchronization.
o Given that the ift_rxd_available method evaluates the RX
descriptors which possibly have been altered by the MAC,
synchronize as appropriate beforehand. Most notably this
is now done in iflib_rxd_avail(), which in turn means that
we don't need to issue the same synchronization yet again
before calling the ift_rxd_pkt_get method in iflib_rxeof().
o In iflib_txd_db_check(), synchronize the TX descriptors
before handing them over to the MAC for transmission via
the ift_txd_flush method.
o In iflib_encap(), move the TX buffer synchronization after
the invocation of the ift_txd_encap() method. If the MAC
driver fails to encapsulate the packet and we retry with
a defragmented mbuf chain or finally fail, the cycles for
TX buffer synchronization have been wasted. Synchronizing
afterwards matches what non-iflib(4) drivers typically do
and is sufficient as the MAC will not actually start with
the transmission before - in this case - the ift_txd_flush
method is called.
Moreover, for the latter reason the synchronization of the
TX descriptors in iflib_encap() can go as it's enough to
synchronize them before passing control over to the MAC by
issuing the ift_txd_flush() method (see above).
o In iflib_txq_can_drain(), only synchronize TX descriptors
if the ift_txd_credits_update method accessing these is
actually called.
Differential Revision: https://reviews.freebsd.org/D19081
[ARM] Make PerformSHLSimplify add nodes to the DAG worklist correctly.
Intentionally excluding nodes from the DAGCombine worklist is likely
to lead to weird optimizations and infinite loops, so it's generally
a bad idea.
To avoid the infinite loops, fix DAGCombine to use the
isDesirableToCommuteWithShift target hook before performing the
transforms in question, and implement the target hook in the ARM
backend disable the transforms in question.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38530 . (I don't have a
reduced testcase for that bug. But we should have sufficient test
coverage for PerformSHLSimplify given that we're not playing weird
tricks with the worklist. I can try to bugpoint it if necessary,
though.)
Differential Revision: https://reviews.llvm.org/D50667
This should fix a possible hang when compiling sys/dev/nxge/if_nxge.c
(which exists now only in the stable/11 branch) for arm.
At moea64_sync_icache(), when the 'va' argument has page size
alignment, round_page() will return the same value as 'va'.
This would cause 'len' to be 0 and thus an infinite loop.
With this change, 'lim' will always point to the next page boundary.
This issue occurred especially during debugging sessions, when a breakpoint
was placed on an exact page-aligned offset, for instance.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D19149
option.
This issue was found by running syzkaller on OpenBSD.
Greg Steuck made me aware that the problem might also exist on FreeBSD.
Reported by: Greg Steuck
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18834
As a followup to r343673, unsign some variables related to allocation
since the hashsize cannot be negative. This gives a bit more space to
handle bigger allocations and avoid some implicit casting.
While here also unsign uh_hashmask, it makes little sense to keep that
signed.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19148
This will allow upstream consumers, e.g., capsicum-test and third-party
packages (via ports(7)), to test for a specific `__FreeBSD_version__` and
expect `renameat(2)` to be functional.
PR: 222258
Approved by: emaste (mentor)
Reviewed by: emaste
MFC with: r343891
Differential Revision: https://reviews.freebsd.org/D19154
