The only change in the default functionality should be that
the output reports are slightly more verbose WRT files deleted.
Not objected to by: freebsd-arch
a full reindex in this case to remove the old record. #ifdef -u capability
since this is available on FreeBSD only.
PR: bin/16418
Problem pointed out by: Masachika ISHIZUKA <ishizuka@ish.org>
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
config(8). This commit allows control of the creation of the
#include "foo.h" files. We now only create them explicitly when needed.
BTW; these are mostly bad because they usually imply static limits on
numbers of units for devices. eg: struct mysoftc sc[NFOO];
These static limits have Got To Go.
pw(8) was calling pwd_mkdb -u oldusername instead of newusername, so
the update appears to have failed until the next full pwd_mkdb
syncronization.
PR: bin/16418
boot.flp and plain boot.flp.
- Clean up crunchgen related routine.
- Add PC-98 support.
TODO:
o Documentation
o Fix some messages for PC-98
o Decrease the size of fixit.flp to 1.2MB
o I18N (See: http://www.jp.FreeBSD.org/BootAsia/index.html)
No response from jkh
lets unprivileged installworld: almost work first try and always work second.
BINOWN isn't quite right for this, but it's not really worth creating
a MAILOWN for this.
a size_t as its 3rd argument, which is 64-bits on the alpha. The 'len'
variable used was a int, which is only 32-bits. Use size_t as the type
for 'len' to work-around this.
- This feature will be enabled only if the string is
enclosed by '/' something like;
card "SunDisk" "/.*/"
- Also added matching additional information strings
followed by version string. This is for the card which is
difficult to idendentify by only the manufacturer and
card version strings matching.
card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0"
Reviewed by: imp
Obtained from: PAO
DATALINK_CARRIER and turn off scripting.
This should fix instances where ``term'' is used followed by ~.
and then ``dial''/``open'' (it currently just sits there looking
at you).
Reported by: Tim Vanderhoek <vanderh@ecf.utoronto.ca>
These are not used anymore and are outdated and only cause
confusion (I just committed a fix to one of these files within
the last hour, thinking it was still valid).
that was lost during the lite-2 merge. From the original commit message:
Initialize the group list so that any filter programs that are
run by lpd are not run with root's groups.
used together by creating a SOCK_DGRAM socketpair() between
the processes.
Be polite when closing !program links and send a HUP to the
process. This makes ssh tunnels over unreliable media (such
as via httptunnel) reconnect properly.
This should solve tentatively the pccardd core dump problem when
there's no CIS (likely CardBus cards).
Later, this function will have regex CIS string comparison capability
too.
Obtained from: PAO
setting 'usbd_enable' in rc.conf during nwe installs if USB is detected.
Also, since usbd already handles USB mice automatically, note that the
mouse setup section in sysinstall only applies to non-USB mice.
. correctly use .Cm macro
. don't use duplicated arguments for .Nm macro
. use .Er macro for error names
. correctly declare paper reference in SEE ALSO section
. sort Xr's in SEE ALSO section
. add integration note
allocated memory was instead pointed to a static string. A later
free() on the value of the pointer was a possible source of reported
"warning: pointer to wrong page" messages from cron.
Use consistent types in sizeof when malloc'ing memory for the
environment.
PR: kern/12248, bin/11169, bin/9722
- Fixed bogus CIS tuple dumping (Network node ID, IRQ modes and etc.)
- Include telling drivers ethernet address if Network node ID
tuple is available. This is usefull for some bogus ehter cards which
can't get correct ethernet address from CIS tupple.
Obtained from: PAO3
o Update extattrctl.c to default new attributes to readable and writable
only by the kernel and root user. Previously the default was to allow
the file owner to directory view and manipulate the attributes, which
is probably an inappropriate default.
that space for extended attributes should be preallocated, instead of
using a sparse attribute file. NOTE: This can result in a really
large file full of zeros. However, it can prevent a low disk condition
from causing an attribute write to fail, which is good for security and
consistency attributes.
o Unlink the attribute file during initattr if an error occurs -- this is
alright, as we specify O_CREAT when opening the file.
utilities do not present the world's greatest interface, and will
undoubtably change soon. However, they do let people experiment with
extended attributes, and provide samples of how to use the syscalls.
Obtained from: TrustedBSD
attributes (recently committed). Using extattrctl, the extended attribute
service may be started and stopped for specific file systems; specific
attributes may be enabled or disabled, and the backing file for each
attribute configured. Also, backing files may be initialized.
Reviewed by: adrian, bp, freebsd-fs, the unthanked masses
Obtained from: TrustedBSD
hostname of the FTP server; that is the proxy's job. This temporarily
deletes the nameserver variable before calling mediaSetFTP.
PR: 17371
Approved by: jkh
(resource and card configuration being used) is to be maintained for
consistency. Part of resource pool re-initialization would be rewrite
later using on Warner-san's hints driver API :-)
Reviewed by: nate, imp and -nomads ML in Japan.
Obtained from: http://www.freebsd.org/~iwasaki/pccard/pccardd-signal.diff
Commited at: BSD HANAMI Party 2000 in Japan
- Fix the -z option which I broke in rev 1.41. It didn't work
correctly when used in conjunction with the -m option.
- Tweak the 3 button state machine so that 'Up' events of the buttons
1 and 3 are reported immediately as soon as the buttons are up.
Approved by: jkh
You can't enable 'emulate 3 button' option for moused in sysinstall.
This adds a menu option to set moused_flags and the help text explains
that entering "-3" will enable this feature.
when we're redialing/reconnecting.
While we're here, log redial, reconnect and phone number
announcements to LogCHAT, and reduce some other logging to
LogDEBUG.
When an NCP reaches TLF, *ONLY* datalink_Close() links that are
in DATALINK_OPEN.
When the last link reaches TLD, DOWN all NCPs (as we used to in the
links TLF (which was the wrong place anyway)), as the NCPs aren't
now going to datalink_Close() us unexpectedly, we get to continue
doing what we were told to do in the first place.
The result: When we lose a link, the IPCP layer goes down and
we actually call the stuff in ppp.linkdown !
It was not a good idea to remove csu_header from struct cspace, it had
ramifications which I didn't notice.
Restore src/usr.sbin/ppp/slcompress.h to the way it was, since MAX_HDR
was already defined as 128 there and it's a user program anyway.
In sys/net/slcompress.h make MAX_HDR 128 intead of MLEN to avoid
bloat.
My apologies for any inconvenience.
configurable directory
- implement alternate and more flexible way to specify
logfile rotation time in addition to the ISO 8601
restricted format
- cleanup the source which was a mix of several styles
of persons who maintained it so far, ran through
knfom script got from bde.
Reviewed by: (in part) sheldonh and garyj
Joerg Wunsch suggested to do this to make the functional changes in
the next commit to newsyslog (which were run through the same script)
better visible.
tree. This considerably reduces unnecessary bloat in struct slcompress.
I'm running with this change right now and have seen no negative
side-effects.
On my sytem this reduced kernel BSS by about 25KB.
Submitted by: bde
Approved by: brian for user-ppp
and has not been loaded via a kldload,
running usbd(8) will autoload the "usb.ko" kld.
thanks to Peter Wemm for enlightening me on the
differences between kldfind(2) and modfind(2).
asking a question again if given an invalid input instead of assuming
what the user wants. /etc is not the place to make assumptions when
given invalid input.
Reformat some of the more convoluted code into seperate functions instead
of being inline using tabs instead of space indents.
Allow the user to view merged files they created with sdiff.
Allow the user to redisplay the diff between the installed file and
the new file again.
Time wasted waiting for review: 1 month 2 weeks
be detected by netscape and such.
PR: bin/17659
Submitted by: Murray Stokelay <murray@cdrom.com>
Approved by: jkh
jkh made updates that conflict with the submitters patch, so I updated
accordingly, any mistakes are mine, not the submitters.
/etc/defaults/pccard.conf in pccardd. But system default pccardd
config file is still /etc/pccard.conf.sample specified in /etc/rc.conf
for the testing this changes.
- improved `include' keyword function for error handling.
- now that resource pool (io, irq, mem) can be overridden.
- pccard config entries is searched following the first match rule if
there are more than two entries which have the same card identifier.
Note that the /etc/defaults/pccard.conf related files is not committed
at this time, will come a week later. I'll prepare the test version
of /etc/defaults/pccard.conf, /etc/pccard.conf and other files soon.
Reviewed by: imp and nomads in Japan.
numbers in all commands.
If people use hostnames and have dodgy resolvers or try to resolve
the hostname before the link is up, they get what they deserve....
Requested by: ru
Submitted by: Mats O Jansson <maja@celsiustech.se>
The existing s2 map is supposed to be ISO 8859-1 but some characters are
not (it's CP850). But the f1 map applied on sweden2 will fixit.
(Fulfilled request by Joerg to close this PR)
add $FreeBSD.
get copyright in sync with FreeBSD recommendation.
remove obsolete stuff resuling from pcvt kernel part cleanup
(caution: this depends in part on modifications to pcvt_ioctl.h,
commit will follow shortly).
add new option "-n" to ispcvt to get number of compiled-in
virtual screens.
for generating /boot/kernel.conf. Since this structure is shared, move
its definition out to a header file, just as struct isa_device was defined
in a header file. This fixes the sysinstall breakage in -current.
don't bother to re-initialise the NCPs. Instead wait for
bundle_LinkClosed() to be called - IFF it actually is called.
By initialising the NCPs at this point, ppp was recursing
back into the fsm_Down() routing for the link, and losing
track of the reason that the link was being brought down.
The end result was that ``set reconnect'' would never do
anything.
Patiently pointed out by: ru
if the childs exec() has succeeded or failed by taking advantage
of the fact that both processes share the same memory.
FWIW:
I tried to implement this by doing a pipe(), setting the
write desciptors close-on-exec flag in the child and writing
errno to the descriptor if the exec() fails. The parent can
then ``if (read()) got errno else exec worked''.
This didn't work though - the child could write() to fd[1] on
exec failure, but the parent got 0 trying to read() from fd[0] !
Is this a bug in execve() ?
dropping out of background/foreground/direct mode.
This avoids either having to wait for the redial timer before
exiting or jaming up in select() waiting for something that'll
never happen.
