following the MFV of r254219 into r255332. In addition the 'FreeBSD'
macro was never defined in ipfilter 5.1.2 thus it never would have
been enabled in the first place.
This work is prompted by a general cleanup of the IP Filter code
prompted by working to resolve a PR. More to follow.
MFC after: 1 week
If user configured the maxswapzone tunable, just take the literal
value for the initial zone sizing attempt. Before, it was only
possible to reduce the zone by the tunable.
While there, correct the message which was not correct when zone
creation rounded the size up.
Reported by: jmg
Reviewed by: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18381
See the review for sample test results.
Reviewed by: kib (kernel part)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18401
In rare situations[*] it's possible for two different interfaces to have
the same name. This confuses pf, because kifs are indexed by name (which
is assumed to be unique). As a result we can end up trying to
if_rele(NULL), which panics.
Explicitly checking the ifp pointer before if_rele() prevents the panic.
Note pf will likely behave in unexpected ways on the the overlapping
interfaces.
[*] Insert an interface in a vnet jail. Rename it to an interface which
exists on the host. Remove the jail. There are now two interfaces with
the same name in the host.
Fix reporting of SS_ONSTACK in nested signal delivery when sigaltstack()
is used on some architectures.
Add a unit test for this. I tested the test by introducing the bug
on amd64. I did not test it on other architectures.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18347
Handling sizes of > 32 backwards will be updated later.
Reviewed by: kib (kernel part)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18387
Limiting the length to 2048 bytes seems to be acceptable, since
the values used right now are using 8 bytes.
Reviewed by: glebius, bz, rrs
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D18366
IFNET_RLOCK_NOSLEEP() is epoch_enter_preempt() in FreeBSD 12+. Holding
it in sysctl_rtsock() doesn't protect us from ifnet unlinking, because
unlinking occurs with IFNET_WLOCK(), that is rw_wlock+sx_xlock, and it
doesn check that concurrent code is running in epoch section. But while
we are in epoch section, we should be able to do access to ifnet's
fields, even it was unlinked. Thus do not change if_addr and if_hw_addr
fields in ifnet_detach_internal() to NULL, since rtsock code can do
access to these fields and this is allowed while it is running in epoch
section.
This should fix the race, when ifnet_detach_internal() unlinks ifnet
after we checked it for IFF_DYING in sysctl_dumpentry.
Move free(ifp->if_hw_addr) into ifnet_free_internal(). Also remove the
NULL check for ifp->if_description, since free(9) can correctly handle
NULL pointer.
MFC after: 1 week
This is the frequency of the cpu on the Pinebook so add it to make
cpufreq find the current setting.
Note that this dtbo on the Pinebook doesn't work right now as u-boot
dtb doesn't have symbols and so it fails to apply. Linux 4.20 have
the dts and will be imported once taggued.
MFC after: 1 month
X-MFC with: r341268
This fix is ported from illumos (issue #9970), the analysis and initial
implementation was done by John Levon.
See also: https://www.illumos.org/issues/9970
Currently, efi_cons_getchar() will wait for a key. While this seems to make
sense, the implementation of getchar() in common/console.c will loop across
getchar() for all consoles without doing ischar() first.
This means that if we've configured multiple consoles, we can't input into
the serial, as getchar() will be sat waiting for input only from efi_console.c
This patch does implement a bit more generic key buffer to support
translation of input keys, and we use generic efi_readkey() to reduce
duplication from calls from getchar() and poll().
Create unified block IO implementation in BIOS version, like it is done in UEFI
side. Implement fd, disk and cd device lists, this will split floppy devices
from disks and will allow us to have consistent, predictable device naming
(modulo BIOS issues).
Differential Revision: https://reviews.freebsd.org/D17888
Early processing of a packet on transmit may change last seen
VLAN TCI in the queue context. If such a packet is eventually
dropped, last seen VLAN TCI must be set to its previous value.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18288
If an event handler requested an abort, only the inner loop was
guarenteed to be broken out of - the outer loop could continue
if total == batch.
Fix this by poisoning batch to ensure it is different to total.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18287
Revise the external port calculation to support all
X2 port modes. The previous algorithm could not
handle different port numbering schemes on each cage.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18285
Correct annotations where NULL input can be permitted
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18284
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18283
In efx_mcdi_phy_module_get_info() probe the
transceiver identification byte rather than assume
the module matches the fixed port type. This
supports scenarios such as a SFP mounted in a QSFP
port via a QSA module.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18282
Add a function which makes an MCDI GET_LINK request and
packages up the results. Currently, the get-link function
is triggered from several entry points which then pass
on or store selected parts of the data. When the driver
needs to obtain the current link state, it is more
efficient to do this in a single call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18281
Previously only some of the code was guarded by this which caused
a build error when EFSYS_OPT_RX_SCALE is 0 (e.g. in manftest).
Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18280
Limit the port mode bandwidth calculations by the maximum
reported link speed. This system detects 25G vs 10G cards,
and 100G port modes vs 40G.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18279
Change the interface to ef10_nic_get_port_mode_bandwidth()
so more NIC information can be used to infer bandwidth
requirements. Huntington calculations separated out
completely.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18278
Add cases for the new port modes supported by X2 NICs.
Lane bandwidth is calculated for pre-X2 cards so is an
underestimate for X2 in 25G/100G modes.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18277
>From Medford onwards, the newer constants enumerating
port modes should be used.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18276
Adjust data types in interface to permit the complete
module information buffer to be obtained in a single
call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18275
Rearrange so the valid addresses are visible to the caller.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18274
Adjust bounds so the interface supports reading
the last available byte of data.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18273
This statistic should include 64byte and smaller frames.
Fix EF10 calculation to match Siena code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18271
The capability bits to request FEC modes are implicitly valid
when the corresponding FEC mode is a supported capability.
Drivers expect that it is only valid to advertise those
capabilities explicitly marked as supported. The capabilities
reported by firmware is modified with the implicit capabilities
to present the explicit model to drivers.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18270
Client drivers may use either legacy flags, for example,
EFX_RX_HASH_TCPIPV4, or generalised flags, for example,
EFX_RX_HASH(IPV4_TCP, 4TUPLE), to configure RSS hash.
The libefx is able to recognise what scheme is used.
Legacy flags may be consumed directly by a chip-specific handler to
configure the NIC, that is, on EF10, these flags can be used to fill
in legacy RSS mode field in MCDI request. Generalised flags can also
be directly used in EF10-specific handler as they are fully compatible
with additional fields of the same MCDI request.
Legacy flags undergo conversion to generalised flags before they
are consumed by a chip-specific handler. This conversion is used to
make sure that chip-specific handlers expect only generalised flags
in the input for the sake of clarity of the code.
Depending on firmware capabilities, a chip-specififc handler either
supplies the input to the NIC directly, for example,
EFX_RX_HASH(IPV4_TCP, 4TUPLE) flag will enable 4 bits in
RSS_CONTEXT_SET_FLAGS_IN_TCP_IPV4_RSS_MODE field on EF10, or takes
the opportunity to translate the input to enable bits which don't map
to the generic flag, like setting
RSS_CONTEXT_SET_FLAGS_IN_TOEPLITZ_TCPV4_EN on EF10 when the firmware
claims no support for additional modes.
However, this approach has introduced a severe problem which can be
reproduced with ultra-low-latency firmware variant. In order to enable
IP hash, EF10-specific handler requires the user to request 2-tuple
hash for IP-other, TCP and UDP traffic classes, unconditionally.
In example, IPv4 hash can be enabled using the following input:
EFX_RX_HASH(IPV4_TCP, 2TUPLE) | EFX_RX_HASH(IPV4_UDP, 2TUPLE) |
EFX_RX_HASH(IPV4, 2TUPLE).
At the same time, on ultra-low-latency firmware, the common code will
never report support for any UDP tuple to the client driver. That is,
in the same example, the driver will use EFX_RX_HASH(IPV4_TCP, 2TUPLE) |
EFX_RX_HASH(IPV4, 2TUPLE). This input will not be recognised by
EF10-specific handler, and RSS_CONTEXT_SET_FLAGS_IN_TOEPLITZ_IPV4_EN
bit will not be set in the MCDI request.
In order to solve the problem, the patch removes conversion code
from chip-specific handlers and adds appropriate code to convert
EFX_RX_HASH() flags to their legacy counterparts to the common scale
mode set function. If the firmware does not support additional modes,
the function will convert generalised flags to legacy flags correctly
without any demand for UDP flags and pass the result to a chip-specific
handler.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18269
