Commit Graph

1329 Commits

Author SHA1 Message Date
jhb
08955ceac0 Change rman_manage_region() to actually honor the rm_start and rm_end
constraints on the rman and reject attempts to manage a region that is out
of range.
- Fix various places that set rm_end incorrectly (to ~0 or ~0u instead of
  ~0ul).
- To preserve existing behavior, change rman_init() to set rm_start and
  rm_end to allow managing the full range (0 to ~0ul) if they are not set by
  the caller when rman_init() is called.
2011-04-29 18:41:21 +00:00
jhb
6a4b2fc4dc Fix build of this kernel config. The ath(4) bits need the 11n frame format
even though ar5416 isn't enabled.

Reviewed by:	adrian
2011-04-29 14:01:49 +00:00
attilio
d685681d59 Add the watchdogs patting during the (shutdown time) disk syncing and
disk dumping.
With the option SW_WATCHDOG on, these operations are doomed to let
watchdog fire, fi they take too long.

I implemented the stubs this way because I really want wdog_kern_*
KPI to not be dependant by SW_WATCHDOG being on (and really, the option
only enables watchdog activation in hardclock) and also avoid to
call them when not necessary (avoiding not-volountary watchdog
activations).

Sponsored by:	Sandvine Incorporated
Discussed with:	emaste, des
MFC after:	2 weeks
2011-04-28 16:02:05 +00:00
mav
519a30551e - Add shim to simplify migration to the CAM-based ATA. For each new adaX
device in /dev/ create symbolic link with adY name, trying to mimic old ATA
numbering. Imitation is not complete, but should be enough in most cases to
mount file systems without touching /etc/fstab.
 - To know what behavior to mimic, restore ATA_STATIC_ID option in cases
where it was present before.
 - Add some more details to UPDATING.
2011-04-26 17:01:49 +00:00
cognet
86e3f53481 Typo fix 2011-04-25 18:15:45 +00:00
mav
512a6cd715 Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
pluknet
a0f46fc78d Call init_param1() much earlier, so that msgbufsize is non-zero when we want
to map and use the msgbuf.

Reviewed by:	cognet
MFC after:	1 week
2011-04-19 15:05:12 +00:00
philip
8b4ad037ac Delete mistakenly added sys/files.ts7800
Add mistakenly forgotten sys/arm/conf/TS7800

Not sure how this happened.  Apologies for the repo-churn.

Submitted by:	glebius
Pointy hat to:	philip
2011-04-18 12:27:57 +00:00
philip
7df95651a2 Add basic support for the Marvell Orion TS-7800.
Submitted by:	Kristof Provost <kristof -at- freebsd.org>
2011-04-15 13:37:43 +00:00
hselasky
69b34d187e We don't need to call EOWRITE4(sc, EHCI_USBINTR, 0) directly from each EHCI
bus driver at detach, hence ehci_detach() does exactly this since r199718.

Submitted by:	Luiz Otavio O Souza
MFC after:	7 days
Approved by:	thompsa (mentor)
2011-04-12 07:49:11 +00:00
hselasky
58267dbb2e - Correct EHCI interrupt disabling at detach.
Submitted by:	Luiz Otavio O Souza
MFC after:	7 days
Approved by:	thompsa (mentor)
2011-04-03 20:17:49 +00:00
adrian
6f4c1d61a6 Break out the ath PCI logic into a separate device/module.
Introduce the AHB glue for Atheros embedded systems. Right now it's
hard-coded for the AR9130 chip whose support isn't yet in this HAL;
it'll be added in a subsequent commit.

Kernel configuration files now need both 'ath' and 'ath_pci' devices; both
modules need to be loaded for the ath device to work.
2011-03-31 08:07:13 +00:00
marcel
fe1990038f Fix mv_gpio_in() for pin numbers that occupy bits 8-31 in GPIO registers.
The compiler will truncate the 32-bit return value of mv_gpio_value_get()
to match the 8-bit return value of mv_gpio_in(). A conditional expression
is used to have mv_gpio_in() always return 0 or 1 instead.
2011-03-16 00:42:15 +00:00
jkim
193712e7cf Make get_cyclecount(9) little bit more useful where binuptime(9) is used. 2011-03-14 23:30:14 +00:00
dchagin
69b8756d3d Extend struct sysvec with new method sv_schedtail, which is used for an
explicit process at fork trampoline path instead of eventhadler(schedtail)
invocation for each child process.

Remove eventhandler(schedtail) code and change linux ABI to use newly added
sysvec method.

While here replace explicit comparing of module sysentvec structure with the
newly created process sysentvec to detect the linux ABI.

Discussed with:	kib

MFC after:	2 Week
2011-03-08 19:01:45 +00:00
rwatson
4c48fabb06 Continue to introduce Capsicum capability mode:
White list sysarch calls allowed in capability mode; arguably, there
should be some link between the capability mode model and the privilege
model here.  Sysarch is a morass similar to ioctl, in many senses.

Submitted by:	anderson
Discussed with:	benl, kris, pjd
Sponsored by:	Google, Inc.
Obtained from:	Capsicum Project
MFC after:	3 months
2011-03-01 13:35:48 +00:00
obrien
c8765c79d9 Add a real dependency on the microcode.
Now when one does 'make kernel ; make kernel' the second invocation
only does:  `kernel.ko' is up to date.
rather than reproduce all the binary microcode files and relink the kernel.
[continuation of r212429]
2011-02-25 09:07:17 +00:00
cognet
5dc900439d Get myself a brain, move the call to init_param1() before the first use in
at91_machdep.c, and do it for the files I forgot the first time

Reported by:	andrew
Submitted by:	pluknet
2011-02-21 13:11:05 +00:00
brucec
6d9b42b486 Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
marcel
5222466d89 Fix the R_ARM_ABS32 relocation implementation. The memory address
contains the addend that we need to include.

Obtained from: Juniper Networks.
Fixed by: Santhanakrishnan Balraj <sbalraj@juniper.net>
2011-02-17 19:31:21 +00:00
alc
2f4da8e71e Remove pmap fields that are either unused or not fully implemented.
Discussed with:	kib
2011-02-17 15:36:29 +00:00
cognet
5f20e78b99 Oops, wasn't supposed to commit this. 2011-02-13 20:04:29 +00:00
cognet
12f7536b5e Call init_param1() much earlier, so that msgbufsize is non-zero when we want
to map and use the msgbuf.
2011-02-13 20:02:46 +00:00
jhb
059cd3cb74 Whitespace tweak. 2011-02-09 14:37:33 +00:00
marcel
cdf278387f In arm_get_next_irq(), use the last IRQ argument in order to prevent
a hard hang due to an interrupt storm or stuck interrupt pin. We
return the next IRQ that is larger than the last one returned and
in doing so give all interrupts a fair chance of being handled.
Consequently, we're able to break into the kernel debugger in such
an event.
2011-02-08 01:49:30 +00:00
marcel
cc3f43e6b2 o Make sure to mask off timer1 interrupts. It's not necessarily
masked-off by the firmware.
o   In DELAY(). Make sure we have an inner-loop body that the compiler
    cannot eliminate. While timing does not have to be perfect, the
    loops must be there to have at least some notion of delay.

Obtained from: Juniper Networks
2011-02-08 01:43:45 +00:00
marcel
afb715ad58 Remove use_high from the softc and simply check the number of GPIO
pins to determine whether there's a high register set or not. This
allows platform_gpio_init() to work without duplicating the work
done in the attach method.
2011-02-07 05:36:32 +00:00
ticso
4054909b91 unbreak mutlicast hash creation for the second time.
at91_emac hardware is *not* using ether_crc32_be algorithm!
2011-02-07 01:13:57 +00:00
imp
84d5c43402 phys_addr is a PA not a VA so declare it as a vm_paddr_t not a vm_offset_t. 2011-02-05 03:36:34 +00:00
imp
e6672e4eca Make md_tp a register_t not a void *. This will keep us from
accidentally dereferencng it and might be one fewer things to change
if arm64 happens...

Submitted by:	rwatson's question on irc...
2011-02-05 03:30:29 +00:00
marcel
2a507fec61 The FDT describes the host controller directly. There's no need to
get properties from the parent. The parent is in fact the FDT bus
itself and will therefore not have the properties we're looking
for.

Sponsored by: Juniper Networks
2011-02-03 18:07:05 +00:00
marcel
59a8457a98 Accept r1 as having the metadata pointer argument if r0 is 0.
This provides backward compatibility with Juniper loaders.

Sponsored by: Juniper Networks
2011-02-03 17:35:16 +00:00
mdf
b291e9a365 Put the general logic for being a CPU hog into a new function
should_yield().  Use this in various places.  Encapsulate the common
case of check-and-yield into a new function maybe_yield().

Change several checks for a magic number of iterations to use
should_yield() instead.

MFC after:	1 week
2011-02-02 16:35:10 +00:00
marcel
97b823bf51 Introduce macro FDT_MAP_IRQ to map from an interrupt controller and
interrupt pin pair to a global IRQ number. When multiple PICs exist
on a board, the interrupt pin alone is not unique.
2011-01-29 20:25:20 +00:00
andrew
0b5604dcfb Move the load address of the kernel to the start of KVA as the
s3c24x0 copy of initarm expects the kernel to be loaded there.

Approved by:	imp (mentor)
2011-01-29 00:46:11 +00:00
marcel
9e953ad74a Fix r217688. We need to call init_param1() before we use msgbufsize,
now that the size of the message buffer is a tunable.
2011-01-22 01:31:59 +00:00
marcel
2d20aaad9b Fix backtraces by defining ksym_start & ksym_end if DDB is
defined. The kernel linker doesn't deal with symbols of
type NOTYPE and typically gives the wrong symbol ($a) for
local symbols.

Obtained from:  Juniper Networks, Inc.
2011-01-22 00:32:12 +00:00
pluknet
5f536fc1d3 Make MSGBUF_SIZE kernel option a loader tunable kern.msgbufsize.
Submitted by:	perryh pluto.rain.com (previous version)
Reviewed by:	jhb
Approved by:	kib (mentor)
Tested by:	universe
2011-01-21 10:26:26 +00:00
kib
ef4e87bddc For architectures not using direct map , and requiring real KVA page for
sf buf allocation, use wakeup() instead of wakeup_one() to notify sf
buffer waiters about free buffer.

sf_buf_alloc() calls msleep(PCATCH) when SFB_CATCH flag was given,
and for simultaneous wakeup and signal delivery, msleep() returns
EINTR/ERESTART despite the thread was selected for wakeup_one(). As
result, we loose a wakeup, and some other waiter will not be woken up.

Reported and tested by:	az
Reviewed by:	alc, jhb
MFC after:	1 week
2011-01-18 21:57:02 +00:00
jkim
c94e91a673 Remove empty dev_mem_md_init() stubs. 2011-01-17 23:06:47 +00:00
jkim
ea861abf2a Add reader/writer lock around mem_range_attr_get() and mem_range_attr_set().
Compile sys/dev/mem/memutil.c for all supported platforms and remove now
unnecessary dev_mem_md_init().  Consistently define mem_range_softc from
mem.c for all platforms.  Add missing #include guards for machine/memdev.h
and sys/memrange.h.  Clean up some nearby style(9) nits.

MFC after:	1 month
2011-01-17 22:58:28 +00:00
marcel
a001bebbff Don't re-use MODINFOMD_BOOTINFO as MODINFOMD_DTBP. It breaks
compatibility without any means for the kernel to work with
an older loader.
2011-01-11 22:07:39 +00:00
jhb
c17f46e472 Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by:	bde
2011-01-11 13:59:06 +00:00
kib
4f8260e700 Move repeated MAXSLP definition from machine/vmparam.h to sys/vmmeter.h.
Update the outdated comments describing MAXSLP and the process
selection algorithm for swap out.

Comments wording and reviewed by:	alc
2011-01-09 12:50:44 +00:00
tijl
89281909e1 On mixed 32/64 bit architectures (mips, powerpc) use __LP64__ rather than
architecture macros (__mips_n64, __powerpc64__) when 64 bit types (and
corresponding macros) are different from 32 bit. [1]

Correct the type of INT64_MIN, INT64_MAX and UINT64_MAX.

Define (U)INTMAX_C as an alias for (U)INT64_C matching the type definition
for (u)intmax_t. Do this on all architectures for consistency.

Suggested by:	bde [1]
Approved by:	kib (mentor)
2011-01-08 12:43:05 +00:00
tijl
61d89c0b21 On 32 bit architectures define (u)int64_t as (unsigned) long long instead
of (unsigned) int __attribute__((__mode__(__DI__))). This aligns better
with macros such as (U)INT64_C, (U)INT64_MAX, etc. which assume (u)int64_t
has type (unsigned) long long.

The mode attribute was used because long long wasn't standardised until
C99. Nowadays compilers should support long long and use of the mode
attribute is discouraged according to GCC Internals documentation.

The type definition has to be marked with __extension__ to support
compilation with "-std=c89 -pedantic".

Discussed with:	bde
Approved by:	kib (mentor)
2011-01-08 11:47:55 +00:00
tijl
af03e997ba Fix types of some values in machine/_limits.h.
On some architectures UCHAR_MAX and USHRT_MAX had type unsigned int.
However, lacking integer suffixes for types smaller than int, their type
should correspond to that of an object of type unsigned char (or short)
when used in an expression with objects of type int. In that case unsigned
char (short) are promoted to int (i.e. signed) so the type of UCHAR_MAX and
USHRT_MAX should also be int.

Where MIN/MAX constants implicitly have the correct type the suffix has
been removed.

While here, correct some comments.

Reviewed by:	bde
Approved by:	kib (mentor)
2011-01-08 11:13:34 +00:00
tijl
69f9492737 Remove unused support for 64 bit long on 32 bit architectures.
It was used mainly to discover and fix some 64-bit portability problems
before 64-bit arches were widely available.

Discussed with:	bde
Approved by:	kib (mentor)
2011-01-07 22:57:31 +00:00
kib
ed862725de Add AT_STACKPROT elf aux vector. Will be used to inform rtld about the
initial stack protection set by the kernel image activator.
2011-01-07 14:22:34 +00:00
jhb
ae4deb7aad Remove bogus usage of INTR_FAST. "Fast" interrupts are now indicated by
registering a filter handler rather than a threaded handler.  Also remove
a bogus use of INTR_MPSAFE for a filter.
2011-01-06 21:08:06 +00:00