previous commit:
Include <sys/mutex.h> and its prerequisite <sys/lock.h> instead of
depending on namespace pollution in <sys/buf.h>. Only do this in the
__FreeBSD_version > 500000 case although the __FreeBSD_version < 500000
case has already rotted.
(what we want to mask is the ATA interrupts, which run at level splbio),
and add interrupt masking around the statement that modifies the
request queue for a SIM.
This resolves problems reported by users under heavy ATAPI load.
Reviewed by: roberto
reprobe code working. This bogusness was thrust upon me.
o Don't delete the device if no drivers attach. I had thrust this bogusness
upon others.
These two changes make kldload of a pccard driver work again.
cards to test; however the submitter reports that this patch works
with the on-board interface on the IBM x235 server.
Submitted by: Jung-uk Kim <jkim@niksun.com>
MFC after: 1 month
- Get the initial mode from the prom settings and don't clobber the mode
on open.
- Copy output into an internal ring buffer instead of accessing the tty
outq directly in the interrupt handler. This fixes a problem where
garbage would show up in the output stream.
- Reset the console port completely and reprogram all the parameters
before enabling it. This fixes seemingly random hangs on startup
when using a fast interrupt handler.
- Add minimal locking in place of spls.
- Remove dead code and minor cleanups.
any machine dependent initialization. This allows the MD code to set the
interrupt routing model so that PCI interrupts are routed correctly when
using an APIC or SAPIC for example.
In this installment, we learn that it is bad to access registers that
are only defined for mfc cards in the interrupt handler when we do not
in fact have a mfc card. For MFC cards, we'll only call the ISR if
the this card interrupted bit is set. For non mfc cards (which are
basically 90% of pccards in use), we always call the ISR and avoid
touching the suspect registers. We always pacify the bit in the MFC
case on the off chance that will help in the itnerrupt handler not
being registed.
when the first PCI bus attaches.
- Create /dev/pci during MOD_LOAD as well.
- Destroy /dev/pci during MOD_UNLOAD (not that you can kldunload pci, but
might as well get the code right)
PUC devices live on pccard or pci so INTR_FAST is never really an option.
Don't try to register the interrupt as fast and don't allow the children
to do so either.
