r345620 by kib@ fixed the rtld issue that caused a crash at startup
during resolution of libc's ifuncs with BIND_NOW.
PR: 233333
Sponsored by: The FreeBSD Foundation
In particular, use ifuncs for __getcontextx_size(), also calculate the
size of the extended save area in resolver. Same for __fillcontextx2().
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
An issue remains with BIND_NOW and processes using threads. For now,
restore libc's BIND_NOW disable, and also disable BIND_NOW in rtld and
libthr.
A patch is in review (D18400) that likely fixes this issue, but just
disable BIND_NOW pending further testing after it is committed.
PR: 233333
Sponsored by: The FreeBSD Foundation
When immediate bind mode is requested, as of r340675 rtld processes
irelocs in PLT immediately after other PLT relocs. That addresses the
libc + BIND_NOW startup crash the workaround is no longer needed.
PR: 233333
Building libc WITH_BIND_NOW results in segfault at process start. For
now force BIND_NOW off until the root cause can be identified and fixed.
PR: 233333
Sponsored by: The FreeBSD Foundation
Targets like 'cleandir' must not depend on toolchain capabilities.
Reported by: delphij, Shawn Webb
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
We expect to introduce optimized libc routines in the near future,
which requires use of a linker that supports ifuncs.
Approved by: re (gjb, kib)
Sponsored by: The FreeBSD Foundation
This is in preparation for changes to update the various ID strings in
libc's source. CSRG ID strings will use __SCCSID() and there are some
existing uses of __RCSID() for NetBSD ID strings already. These are
generally under either an explicit #if 0 or an #ifdef LIBC_SCCS so are
off by default and this change preserves that existing behavior.
Differential Revision: https://reviews.freebsd.org/D15830
Rtld is not compatible with SSP, and since we link libc_pic.a to rtld
to have the basic support like memory and string copy functions, we
have to both carefully limit libc use, and to provide the ssp support
shims. This change makes the libc use in rtld more straighforward but
still limited, and allows to remove the shims, to be done in the next
commit.
Submitted by: Luis Pires
Reviewed by: bdrewery, brooks
Differential revision: https://reviews.freebsd.org/D15283
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
This reduces build output, need for recalculating paths, and makes it clearer
which paths are relative to what areas in the source tree. The change in
performance over a locally mounted UFS filesystem was negligible in my testing,
but this may more positively impact other filesystems like NFS.
LIBC_SRCTOP was left alone so Juniper (and other users) can continue to
manipulate lib/libc/Makefile (and other Makefile.inc's under lib/libc) as
include Makefiles with custom options.
Discussed with: marcel, sjg
MFC after: 1 week
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9207
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
we don't have it when MK_SSP==no.
This fixes compilation on MIPS.
Reviewed by: imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D8212
Right now, userspace (fast) gettimeofday(2) on x86 only works for
RDTSC. For older machines, like Core2, where RDTSC is not C2/C3
invariant, and which fall to HPET hardware, this means that the call
has both the penalty of the syscall and of the uncached hw behind the
QPI or PCIe connection to the sought bridge. Nothing can me done
against the access latency, but the syscall overhead can be removed.
System already provides mappable /dev/hpetX devices, which gives
straight access to the HPET registers page.
Add yet another algorithm to the x86 'vdso' timehands. Libc is updated
to handle both RDTSC and HPET. For HPET, the index of the hpet device
to mmap is passed from kernel to userspace, index might be changed and
libc invalidates its mapping as needed.
Remove cpu_fill_vdso_timehands() KPI, instead require that
timecounters which can be used from userspace, to provide
tc_fill_vdso_timehands{,32}() methods. Merge i386 and amd64
libc/<arch>/sys/__vdso_gettc.c into one source file in the new
libc/x86/sys location. __vdso_gettc() internal interface is changed
to move timecounter algorithm detection into the MD code.
Measurements show that RDTSC even with the syscall overhead is faster
than userspace HPET access. But still, userspace HPET is three-four
times faster than syscall HPET on several Core2 and SandyBridge
machines.
Tested by: Howard Su <howard0su@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D7473
MK_TOOLCHAIN==no disables building and installing of pic archives.
c_pic.a is still needed for rtld though so force it to build in lib/libc
and link directly to the objdir version of it for rtld.
Somehow this has been broken since r148725.
Sponsored by: EMC / Isilon Storage Division
the constraints on what needs to be installed in a specific to
maintain consistency during upgrades.
Create a new clibs package containing libraries that are needed
as a bare minimum for consistency.
With much help and input from: kib
Sponsored by: The FreeBSD Foundation
POSIX requires for the c99 compiler.
(In fact, our c99(1) already ignores -lxnet; but our make(1) doesn't set
${CC} correctly, and our cc(1) treats xnet like any other library.)
Reviewed by: kib
As part of the code refactoring to support FORTIFY_SOURCE we want
a new subdirectory "secure" to keep the files related to security.
Move the stack protector functions to this new directory.
No functional change.
Differential Review: https://reviews.freebsd.org/D3333
Since METAMODE has been added, sys.mk loads bsd.mkopt.mk which ends load loading
bsd.own.mk which then defines SHLIBDIR before all the Makefile.inc everywhere.
This makes /lib being populated again.
Reported by: many
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
dependent functions have been implemented, but this is enough for world.
Differential Revision: https://reviews.freebsd.org/D2132
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
(or loading a dso linked to libthr.so into process which was not
linked against threading library).
- Remove libthr interposers of the libc functions, including
__error(). Instead, functions calls are indirected through the
interposing table, similar to how pthread stubs in libc are already
done. Libc by default points either to syscall trampolines or to
existing libc implementations. On libthr load, libthr rewrites the
pointers to the cancellable implementations already in libthr. The
interposition table is separate from pthreads stubs indirection
table to not pull pthreads stubs into static binaries.
- Postpone the malloc(3) internal mutexes initialization until libthr
is loaded. This avoids recursion between calloc(3) and static
pthread_mutex_t initialization.
- Reinstall signal handlers with wrapper on libthr load. The
_rtld_is_dlopened(3) is used to avoid useless calls to sigaction(2)
when libthr is statically referenced from the main binary.
In the process, fix openat(2), swapcontext(2) and setcontext(2)
interposing. The libc symbols were exported at different versions
than libthr interposers. Export both libc and libthr versions from
libc now, with default set to the higher version from libthr.
Remove unused and disconnected swapcontext(3) userspace implementation
from libc/gen.
No objections from: deischen
Tested by: pho, antoine (exp-run) (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
500 new testcases
Various TODOs have been sprinkled around the Makefiles for items that even need
to be ported (missing features), testcases have issues with building/linking, or
issues at runtime.
A variant of this code has been tested extensively on amd64 and i386
10-STABLE/11-CURRENT for several months without issue. It builds on other
architectures, but the code will remain off until I have prove it works on
virtual hardware or real hardware on other architectures
In collaboration with: pho, Casey Peel <casey.peel@isilon.com>
Sponsored by: EMC / Isilon Storage Division
Makefiles should not assume that source files can be overwritten. This is the
common case for Perforce source trees.
This is a followup commit to r211243 in the same vein.
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: r1036319 on 2014/01/29, r1046711 on 2014/03/06
Add LIBSSP_NONSHARED to bsd.libnames.mk and append LIBSSP_NONSHARED to DPADD in
lib/libc when MK_SSP != no
Approved by: rpaulo (mentor)
MFC after: 3 days
Phabric: D675 (as part of a larger diff)
PR: 192728
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
if not already defined. This allows building libc from outside of
lib/libc using a reach-over makefile.
A typical use-case is to build a standard ILP32 version and a COMPAT32
version in a single iteration by building the COMPAT32 version using a
reach-over makefile.
Obtained from: Juniper Networks, Inc.
