... instead of deferring the action until first open.
Unlike upstream this has no benefit on FreeBSD.
We know that as soon as the provider is created it is going to be tasted
and thus opened. Initial mediasize of zero causes tasting failure
and subsequent retasting because of the size change.
MFC after: 14 days
This should allow to mount a dataset as a root filesystem even if
it belongs to a pool that is not described in zpool.cache.
This adds some overhead to the boot process though.
If the root filesystem's pool is found in zpool.cache, the by default
its cached configuration will be used for import.
vfs.zfs.rootpool.prefer_cached_config could be set to zero to force
the config to be retasted.
Discussed with: gibbs, pjd, des
MFC after: 25 days
doesn't exist on a dataset we are starting from. For example if we
have the following configuration:
tank
tank/foo
tank/foo@snap
tank/bar
tank/bar@snap
We can execute:
# zfs destroy -t tank@snap
eventhough tank@snap doesn't exit.
Unfortunately it is not possible to do the same with recursive rename:
# zfs rename -r tank@snap tank@pans
cannot open 'tank@snap': dataset does not exist
...until now. This change allows to recursively rename snapshots even if
snapshot doesn't exist on the starting dataset.
Sponsored by: rsync.net
MFC after: 2 weeks
The code builds a map of regions that were freed. On every write the
code consults the map and eventually removes ranges that were freed
before, but are now overwritten.
Freed blocks are not TRIMed immediately. There is a tunable that defines
how many txg we should wait with TRIMming freed blocks (64 by default).
There is a low priority thread that TRIMs ranges when the time comes.
During TRIM we keep in-flight ranges on a list to detect colliding
writes - we have to delay writes that collide with in-flight TRIMs in
case something will be reordered and write will reached the disk before
the TRIM. We don't have to do the same for in-flight writes, as
colliding writes just remove ranges to TRIM.
Sponsored by: multiplay.co.uk
This work includes some important fixes and some improvements obtained
from the zfsonlinux project, including TRIMming entire vdevs on pool
create/add/attach and on pool import for spare and cache vdevs.
Obtained from: zfsonlinux
Submitted by: Etienne Dechamps <etienne.dechamps@ovh.net>
Do this by checking if spa_namespace_lock is already held and not taking
it again in that case.
Add a comment explaining why that is done and why it is safe.
Reviewed by: pjd
MFC after: 24 days
Since all attribute values start at 8-byte aligned boundary, we would
previously incorrectly calculate dn_bonuslen if any attribute but the
last had a variable-length value with length not multiple of 8.
Reported by: Nicolas Rachinsky <fbsd-mas-0@ml.turing-complete.org>
Tested by: Nicolas Rachinsky <fbsd-mas-0@ml.turing-complete.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> (for upstream)
MFC after: 2 weeks
- skip length_idx index for a replaced variable-sized attribute
- skip length_idx index for a removed variable-sized attribute
- also re-arranged code to make sure that length_idx is always
incremented for variable-sized attributes
- additionally add an assertion that the number of actually produced
attributes is the same as the expected number of resulting
attributes
In cooperation with: Matthew Ahrens <mahrens@delphix.com>
Tested by: Trent Nelson <trent@snakebite.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> (for upstream)
To do: get this upstreamed
MFC after: 2 weeks
When calling a revoke(2) on a dtrace device, dtrace_close() could be
called, even if threads are still stuck in the device. Defer the actual
deallocation of datastructures to the cdevpriv destructor.
While there, remove the unneeded D_TRACKCLOSE and D_NEEDMINOR flags. For
the helper device, we never need it. For the regular dtrace devices, we
only need these flags on FreeBSD pre-8.
MFC after: 1 month
1) It is not useful to call "devfs_clear_cdevpriv()" from
"d_close" callbacks, hence for example read, write, ioctl and
so on might be sleeping at the time of "d_close" being called
and then then freed private data can still be accessed.
Examples: dtrace, linux_compat, ksyms (all fixed by this patch)
2) In sys/dev/drm* there are some cases in which memory will
be freed twice, if open fails, first by code in the open
routine, secondly by the cdevpriv destructor. Move registration
of the cdevpriv to the end of the drm open routines.
3) devfs_clear_cdevpriv() is not called if the "d_open" callback
registered cdevpriv data and the "d_open" callback function
returned an error. Fix this.
Discussed with: phk
MFC after: 2 weeks
Update DTrace disassembler accordingly. The code to treat the prefixes
as null prefixes was already in place.
Although in practice compilers seem to generate only cs-prefix for use
in long NOPs, the same treatment is applied to all of cs, ds, es, ss for
consistency.
Reported by: emaste
Tested by: emaste
Obtained from: Illumos commit 13442:4adbe6de60c8 (+ local changes)
MFC after: 5 days
According to the AMD manual the whole range from 0x09 to 0x1f are NOPs.
Intel manual mentions only 0x1f. Use only Intel one for now, it seems
to be the one actually generated by compilers.
Use gdb mnemonic for the operation: "nopw".
[1] AMD64 Architecture Programmer's Manual
Volume 3: General-Purpose and System Instructions
[2] Software Optimization Guide for AMD Family 10h Processors
[3] Intel(R) 64 and IA-32 Architectures Software Developer’s Manual
Volume 2 (2A, 2B & 2C): Instruction Set Reference, A-Z
Tested by: Fabian Keil <freebsd-listen@fabiankeil.de> (earlier version)
MFC after: 3 days
Bryan Cantrill implemented the equivalent of semi-log graph
paper for Dtrace so llquantize will use one logarithmic and
one linear scale.
Special thanks to Mark Peek for providing fix to an
assertion and to Fabian Keill for testing the port.
Illumos Revision: 13355:15b74a2a9a9d
Reference:
https://www.illumos/issues/905
Obtained from: Illumos
Tested by: Fabian Keill, mp
MFC after: 4 days
differentiate between an incremental and full stream.
Be sure not to generate guid equal to 0.
Reported by: someone who saw 0 being generated as 64bit random guid
MFC after: 3 days
The skew calculation here is exactly backwards. We were able to repro
it on a multi-package ESX server running a FreeBSD VM, where the TSCs
can be pretty evil.
MFC after: 1 week
Submitted by: Jeff Ford <jeffrey.ford2@isilon.com>
Reviewed by: avg, gnn
1948 zpool list should show more detailed pool information
Display per-vdev information with "zpool list -v".
The added expandsize property has currently no value on FreeBSD.
This changeset allows adding expansion support to individual vdevs
in the future.
References:
https://www.illumos.org/issues/1948
Obtained from: illumos (issue #1948)
MFC after: 2 weeks
vn_rlimit_fsize takes uio->uio_offset and uio->uio_resid into account
when determining whether given write would exceed RLIMIT_FSIZE.
When APPEND flag is specified, ZFS updates uio->uio_offset to point to the
end of file.
But this happens after a call to vn_rlimit_fsize, so vn_rlimit_fsize check
can be rendered ineffective by thread that opens some file with O_APPEND
and lseeks below RLIMIT_FSIZE before calling write.
Submitted by: Mateusz Guzik <mjguzik at gmail dot com>
MFC after: 2 weeks
2703 add mechanism to report ZFS send progress
If the zfs send command is used with the -v flag, the amount of bytes
transmitted is reported in per second updates.
References:
https://www.illumos.org/issues/2703
Obtained from: illumos (issue #2703)
MFC after: 2 weeks
to follow the example of OpenSolaris and its descendants, which implemented
cpu as an inline that took a value out of curthread. At certain points in
the FreeBSD scheduler curthread->td_oncpu will no longer be valid (in
particukar, just before the thread gets descheduled) so instead I have
implemented this as its own built-in variable.
Sponsored by: Sandvine Inc.
MFC after: 1 week
accesses of the cache member of vm_object objects.
- Use novel vm_page_is_cached() for checks outside of the vm subsystem.
Reviewed by: alc
MFC after: 2 weeks
X-MFC: r234039
On FreeBSD the direct ioctl argument is automatically copied in/out
as necesary by the kernel ioctl entry point.
PR: kern/164445
Submitted by: Luis Garces-Erice <lge@ieee.org>
Tested by: Attila Nagy <bra@fsn.hu>
MFC after: 5 days
loaded and unloaded, also have sdt.ko register callbacks with kern_sdt.c
that will be called when a newly loaded KLD module adds more probes or
a module with probes is unloaded.
This fixes two issues: first, if a module with SDT probes was loaded after
sdt.ko was loaded, those new probes would not be available in DTrace.
Second, if a module with SDT probes was unloaded while sdt.ko was loaded,
the kernel would panic the next time DTrace had cause to try and do
anything with the no-longer-existent probes.
This makes it possible to create SDT probes in KLD modules, although there
are still two caveats: first, any SDT probes in a KLD module must be part
of a DTrace provider that is defined in that module. At present DTrace
only destroys probes when the provider is destroyed, so you can still
panic the system if a KLD module creates new probes in a provider from a
different module(including the kernel) and then unload the the first module.
Second, the system will panic if you unload a module containing SDT probes
while there is an active D script that has enabled those probes.
MFC after: 1 month
- header and stub .c file for fasttrap module. It's not supported on
MIPS yet, but there is no way to disable support completely
- Do as amd64 trying to limit allocated memory
allow.mount.zfs:
allow mounting the zfs filesystem inside a jail
This way the permssions for mounting all current VFCF_JAIL filesystems
inside a jail are controlled wia allow.mount.* jail parameters.
Update sysctl descriptions.
Update jail(8) and zfs(8) manpages.
TODO: document the connection of allow.mount.* and VFCF_JAIL for kernel
developers
MFC after: 10 days
Add the sysctl debug.iosize_max_clamp, enabled by default. Setting the
sysctl to zero allows to perform the SSIZE_MAX-sized i/o requests from
the usermode.
Discussed with: bde, das (previous versions)
MFC after: 1 month
excluding other allocations including UMA now entails the addition of
a single flag to kmem_alloc or uma zone create
Reviewed by: alc, avg
MFC after: 2 weeks
names and wants to sort them by name, ie. when executes:
# zfs list -t snapshot -o name -s name
Because only name is needed we don't have to read all snapshot properties.
Below you can find how long does it take to list 34509 snapshots from a single
disk pool before and after this change with cold and warm cache:
before:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 525s
warm cache: 218s
after:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 1.7s
warm cache: 1.1s
MFC after: 1 week
the allocated memory before calling mtx_init(9) on mtx pointing to it.
Otherwize, random contents of uninitialized memory might occasionally
trigger the assertion.
Reported by: Pavel Polyakov <bsd kobyla org>
Reviewed by: pjd
MFC after: 1 week
the number of links against LINK_MAX (which is INT16_MAX), not against
UINT32_MAX. Otherwise, the constant would implicitly be converted to
-1.
Reviewed by: pjd
MFC after: 1 week
(ss == NULL) on pool import. I had such a panic recently. With current version
of ZFS it is still possible to import the pool in readonly mode and backup
all the data, but in case it is impossible for some reason add tunable
vfs.zfs.space_map_last_hope, which when set to '1' will tell ZFS to remove
colliding range and retry. This seems to have worked for me, but I consider
it highly risky to use.
MFC after: 1 week
lock_success/lock_failure, introduced in r228424, by directly skipping
in dtrace_probe.
This mainly helps in avoiding namespace pollution and thus lockstat.h
dependency by systm.h.
As an added bonus, this also helps in MFC case.
Reviewed by: avg
MFC after: 3 months (or never)
X-MFC: r228424
nullfs. The problem is that resulting vnode is only required to be
held on return from the successfull call to vop, instead of being
referenced.
Nullfs VOP_INACTIVE() method reclaims the vnode, which in combination
with the VOP_VPTOCNP() interface means that the directory vnode
returned from VOP_VPTOCNP() is reclaimed in advance, causing
vn_fullpath() to error with EBADF or like.
Change the interface for VOP_VPTOCNP(), now the dvp must be
referenced. Convert all in-tree implementations of VOP_VPTOCNP(),
which is trivial, because vhold(9) and vref(9) are similar in the
locking prerequisites. Out-of-tree fs implementation of VOP_VPTOCNP(),
if any, should have no trouble with the fix.
Tested by: pho
Reviewed by: mckusick
MFC after: 3 weeks (subject of re approval)
certain instructions in a function prologue or epilogue. DTrace has a
hook into the invalid opcode fault handler that checks whether the fault
was due to an probe and if so, runs the DTrace magic.
Upon returning from an invalid opcode fault caused by a probe, DTrace must
emulate the instruction that was replaced with the invalid opcode and then
return control to the instruction following the invalid opcode.
There were a pair of related bugs in the emulation for the leave
instruction. The leave instruction is used to pop off a stack frame prior
to returning from a function. The emulation for this instruction must
move the trap frame for the invalid opcode fault down the stack to the
bottom of the stack frame that is being removed, and then execute an iret.
At two points in this process, the emulation code was storing values above
the current value of the stack pointer. This opened up a window in which
if we were two take an interrupt, the trap frame for the interrupt would
overwrite the values stored on the stack, causing the system to panic
later.
The first bug was that at one point the emulation code saves the new value
for $esp above the current stack pointer value. The fix is to save this
value instead inside of the original trap frame. At this point we do
not need the original trap frame so this is safe.
The second bug is that when the emulate code loads $esp from the stack, it
points part-way through the new trap frame instead of at its beginning.
The emulation code adjusts the stack pointer to the correct value
immediately afterwards, but this still leaves a one instruction window in
which an interrupt would corrupt this trap frame. Fix this by adjusting
the stack frame value before loading it into $esp.
This fixes panics in invop_leave on i386 when using fbt return probes.
Reviewed by: rpaulo, attilio
MFC after: 1 week
ZFS is trying to open and taste ZVOL as its VDEV. This is not supported,
so return an error instead of panicing on spa_namespace_lock recursion.
Reported by: Robert Millan <rmh@debian.org>
PR: kern/162008
MFC after: 3 days
of the CDDL licence explicitly requires every Contributor to add
a copyright notice.
This also reflects the copyright notices for the changes recently
added by Illumos.
MFC after: 3 days
It is possible for file systems with 'mountpoint' preperty set to 'legacy'
or 'none' - we don't have to change mount directory for them.
Currently such file systems are unmounted on rename and not even mounted back.
This introduces layering violation, as we need to update 'f_mntfromname'
field in statfs structure related to mountpoint (for the dataset we are
renaming and all its children).
In my opinion it is worth it, as it allow to update FreeBSD in even cleaner
way - in ZFS-only configuration root file system is ZFS file system with
'mountpoint' property set to 'legacy'. If root dataset is named system/rootfs,
we can snapshot it (system/rootfs@upgrade), clone it (system/oldrootfs),
update FreeBSD and if it doesn't boot we can boot back from system/oldrootfs
and rename it back to system/rootfs while it is mounted as /. Before it was
not possible, because unmounting / was not possible.
MFC after: 2 weeks
This allows to see processes I/O activity in 'top -m io' output.
PR kern/156218
Reported by: Marcus Reid <marcus@blazingdot.com>
Patch by: avg
MFC after: 3 days
- Decompress assembled gang block data if compressed.
- Verify checksum of a gang header.
- Verify checksum of assembled gang block data.
- Verify checksum of uber block.
Submitted by: avg
MFC after: 3 days
physical block size declared in bp may not always be what we want.
For example in case of gang block header physical block size declared
in bp is much larger than SPA_GANGBLOCKSIZE (512 bytes) and checksum
calculation failed. This bug could lead to accessing unallocated
memory and resets/failures during boot.
MFC after: 3 days
