Commit Graph

658 Commits

Author SHA1 Message Date
mav
c6d017514e Remove sleep() from invalidate call in ses driver, waiting for daemon
process exit. Instead use CAM's standard reference counting to prevent
periph going away until process won't complete. I think that sleep in
single CAM SWI thread is not a good idea and may lead to deadlocks if
daemon process waits for some command completion. Combined with recent
patch avoiding use of CAM SWI for ATA it just causes panics because of
sleeps prohibited in interrupt thread context.
2012-05-25 07:57:17 +00:00
mav
96f3e42ce2 MFprojects/zfsd:
Revamp the CAM enclosure services driver.
This updated driver uses an in-kernel daemon to track state changes and
publishes physical path location information\for disk elements into the
CAM device database.

Sponsored by:   Spectra Logic Corporation
Sponsored by:   iXsystems, Inc.
Submitted by:   gibbs, will, mav
2012-05-24 14:07:44 +00:00
mav
4eda0cbde2 MFprojects/zfsd:
- Add low-level support for SATA Enclosure Management Bridge (SEMB)
devices -- SATA equivalents of the SCSI SES/SAF-TE devices.
 - Add some utility functions for SCSI SAF-TE devices access.

Sponsored by:	iXsystems, Inc.
2012-05-24 11:07:39 +00:00
eadler
ff8a940c22 Add support for:
Olympus FE-210 camera
	LG UP3S MP3 player
	Laser MP3-2GA13 MP3

PR:		usb/119201
Submitted by:	Peter Jeremy <peterjeremy@optushome.com.au>
Approved by:	cperciva
MFC after:	1 week
2012-04-29 22:28:15 +00:00
trasz
aa6b6972ad Fix panic at boot with SD/MMC readers with no media present, introduced
at r234177.  Note that this is a temporary fix, until I come up with something
prettier.
2012-04-17 10:44:28 +00:00
trasz
0b02d58773 Refactor da(4) to remove one of two code paths used to query capacity
data.

Reviewed by:	ken, mav (earlier version)
Sponsored by:	The FreeBSD Foundation
2012-04-12 12:58:14 +00:00
mav
4409a9b5ec Be more conservative in using READ CAPACITY(16) command. Previous code
checked PROTECT bit in INQUIRY data for all SPC devices, while it is defined
only since SPC-3. But there are some SPC-2 USB devices were reported, that
have PROTECT bit set, return no error for READ CAPACITY(16) command, but
return wrong sector count value in response.

MFC after:	3 days
2012-03-31 11:23:09 +00:00
gibbs
f57f409fc3 Limit the ST3146855LW U320 drive to 55 tags to avoid command timeouts
under load.

Submitted by:	Gelson Borsoi
MFC after:	1 day
2012-02-15 07:30:23 +00:00
mav
2f1a53faf1 Insert ordered command every 1/4 of the current command timeout, not 1/4
of the default one.

Without this change setting kern.cam.ada.default_timeout to 1 instead of 30
allowed me to trigger several false positive command timeouts under heavy
ZFS load on a SiI3132 siis(4) controller with 5 HDDs on a port multiplier.

MFC after:	1 week
2012-02-02 19:02:15 +00:00
ken
26bbbe8e99 Add CAM infrastructure to allow reporting when a drive's long read capacity
data changes.

cam_ccb.h:	Add a new advanced information type, CDAI_TYPE_RCAPLONG,
		for long read capacity data.

cam_xpt_internal.h:
		Add a read capacity data pointer and length to struct cam_ed.

cam_xpt.c:	Free the read capacity buffer when a device goes away.
		While we're here, make sure we don't leak memory for other
		malloced fields in struct cam_ed.

scsi_all.c:	Update the scsi_read_capacity_16() to take a uint8_t * and
		a length instead of just a pointer to the parameter data
		structure.  This will hopefully make this function somewhat
		immune to future changes in the parameter data.

scsi_all.h:	Add some extra bit definitions to struct
		scsi_read_capacity_data_long, and bump up the structure
		size to the full size specified by SBC-3.

		Change the prototype for scsi_read_capacity_16().

scsi_da.c:	Register changes in read capacity data with the transport
		layer.  This allows the transport layer to send out an
		async notification to interested parties.  Update the
		dasetgeom() API.

		Use scsi_extract_sense_len() instead of
		scsi_extract_sense().

scsi_xpt.c:	Add support for the new CDAI_TYPE_RCAPLONG advanced
		information type.

		Make sure we set the physpath pointer to NULL after freeing
		it.  This allows blindly freeing it in the struct cam_ed
		destructor.

sys/param.h:	Bump __FreeBSD_version from 1000005 to 1000006 to make it
		easier for third party drivers to determine that the read
		capacity data async notification is available.

camcontrol.c,
mptutil/mpt_cam.c:
		Update these for the new scsi_read_capacity_16() argument
		structure.

Sponsored by:	Spectra Logic
2012-01-26 18:09:28 +00:00
avg
2864011233 dadump: don't leak the periph lock on i/o error
Reported by:	az
MFC after:	1 week
2012-01-15 20:43:39 +00:00
mav
c0e7373e62 Add BIO_DELETE support for SCSI Direct Access devices (da).
Depending on device capabilities use different methods to implement it.
Currently used method can be read/set via kern.cam.da.X.delete_method
sysctls. Possible values are:
 NONE - no provisioning support reported by the device;
 DISABLE - provisioning support was disabled because of errors;
 ZERO - use WRITE SAME (10) command to write zeroes;
 WS10 - use WRITE SAME (10) command with UNMAP bit set;
 WS16 - use WRITE SAME (16) command with UNMAP bit set;
 UNMAP - use UNMAP command (equivalent of the ATA DSM TRIM command).
The last two methods (UNMAP and WS16) are defined by SBC specification and
the UNMAP method is the most advanced one. The rest of methods I've found
supported in Linux, and as soon as they were trivial to implement, then
why not? Hope they will be useful in some cases.

Unluckily I have no devices properly reporting parameters of the logical
block provisioning support via respective VPD pages (0xB0 and 0xB2). So
all info I have/use now is the flag telling whether logical block
provisioning is supported or not. As result, specific methods chosen now
by trying different ones in order (UNMAP, WS16, DISABLE) and checking
completion status to fallback if needed. I don't expect problems from this,
as if something go wrong, it should just disable itself. It may disable
even too aggressively if only some command parameter misfit.

Unlike Linux, which executes each delete with separate request, I've
implemented here the same request aggregation as implemented in ada driver.
Tests on SSDs I have show much better results doing it this way: above
8GB/s of the linear delete on Intel SATA SSD on LSI SAS HBA (mps).

Reviewed by:	silence on scsi@
MFC after:	2 month
Sponsored by:	iXsystems, Inc.
2012-01-13 10:21:17 +00:00
ken
8e2b5cb835 Fix a race condition in CAM peripheral free handling, locking
in the CAM XPT bus traversal code, and a number of other periph level
issues.

cam_periph.h,
cam_periph.c:	Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID
		flag prior to allowing a reference count to be gained
		on a peripheral.  Callers of this function will receive
		CAM_REQ_CMP_ERR status in the situation of attempting to
		reference an invalidated periph.  This guarantees that
		a peripheral scheduled for a deferred free will not
		be accessed during its wait for destruction.

		Panic during attempts to drop a reference count on
		a peripheral that already has a zero reference count.

		In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN
		set so that mallocs do not occur while the xpt topology
		lock is held, regardless of the allocation policy of the
		passed in sbuf.

		Add a new routine, cam_periph_release_locked_buses(),
		that can be called when the caller already holds
		the CAM topology lock.

		Add some extra debugging for duplicate peripheral
		allocations in cam_periph_alloc().

		Treat CAM_DEV_NOT_THERE much the same as a selection
		timeout (AC_LOST_DEVICE is emitted), but forgo retries.

cam_xpt.c:      Revamp the way the EDT traversal code does locking
		and reference counting.  This was broken, since it
		assumed that the EDT would not change during
		traversal, but that assumption is no longer valid.

		So, to prevent devices from going away while we
		traverse the EDT, make sure we properly lock
		everything and hold references on devices that
		we are using.

		The two peripheral driver traversal routines should
		be examined.  xptpdperiphtraverse() holds the
		topology lock for the entire time it runs.
		xptperiphtraverse() is now locked properly, but
		only holds the topology lock while it is traversing
		the list, and not while the traversal function is
		running.

		The bus locking code in xptbustraverse() should
		also be revisited at a later time, since it is
		complex and should probably be simplified.

scsi_da.c:	Pay attention to the return value from cam_periph_acquire().

		Return 0 always from daclose() even if the disk is now gone.

		Add some rudimentary error injection support.

scsi_sg.c:	Fix reference counting in the sg(4) driver.

		The sg driver was calling cam_periph_release() on close,
		but never called cam_periph_acquire() (which increments
		the reference count) on open.

		The periph code correctly complained that the sg(4)
		driver was trying to decrement the refcount when it
		was already 0.

Sponsored by:	Spectra Logic
MFC after:	2 weeks
2012-01-12 00:41:48 +00:00
ken
fce645c153 Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003.  It has been shipping in
Copan (now SGI) products since 2005.

It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license.  The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.

Some CTL features:

 - Disk and processor device emulation.
 - Tagged queueing
 - SCSI task attribute support (ordered, head of queue, simple tags)
 - SCSI implicit command ordering support.  (e.g. if a read follows a mode
   select, the read will be blocked until the mode select completes.)
 - Full task management support (abort, LUN reset, target reset, etc.)
 - Support for multiple ports
 - Support for multiple simultaneous initiators
 - Support for multiple simultaneous backing stores
 - Persistent reservation support
 - Mode sense/select support
 - Error injection support
 - High Availability support (1)
 - All I/O handled in-kernel, no userland context switch overhead.

(1) HA Support is just an API stub, and needs much more to be fully
    functional.

ctl.c:			The core of CTL.  Command handlers and processing,
			character driver, and HA support are here.

ctl.h:			Basic function declarations and data structures.

ctl_backend.c,
ctl_backend.h:		The basic CTL backend API.

ctl_backend_block.c,
ctl_backend_block.h:	The block and file backend.  This allows for using
			a disk or a file as the backing store for a LUN.
			Multiple threads are started to do I/O to the
			backing device, primarily because the VFS API
			requires that to get any concurrency.

ctl_backend_ramdisk.c:	A "fake" ramdisk backend.  It only allocates a
			small amount of memory to act as a source and sink
			for reads and writes from an initiator.  Therefore
			it cannot be used for any real data, but it can be
			used to test for throughput.  It can also be used
			to test initiators' support for extremely large LUNs.

ctl_cmd_table.c:	This is a table with all 256 possible SCSI opcodes,
			and command handler functions defined for supported
			opcodes.

ctl_debug.h:		Debugging support.

ctl_error.c,
ctl_error.h:		CTL-specific wrappers around the CAM sense building
			functions.

ctl_frontend.c,
ctl_frontend.h:		These files define the basic CTL frontend port API.

ctl_frontend_cam_sim.c:	This is a CTL frontend port that is also a CAM SIM.
			This frontend allows for using CTL without any
			target-capable hardware.  So any LUNs you create in
			CTL are visible in CAM via this port.

ctl_frontend_internal.c,
ctl_frontend_internal.h:
			This is a frontend port written for Copan to do
			some system-specific tasks that required sending
			commands into CTL from inside the kernel.  This
			isn't entirely relevant to FreeBSD in general,
			but can perhaps be repurposed.

ctl_ha.h:		This is a stubbed-out High Availability API.  Much
			more is needed for full HA support.  See the
			comments in the header and the description of what
			is needed in the README.ctl.txt file for more
			details.

ctl_io.h:		This defines most of the core CTL I/O structures.
			union ctl_io is conceptually very similar to CAM's
			union ccb.

ctl_ioctl.h:		This defines all ioctls available through the CTL
			character device, and the data structures needed
			for those ioctls.

ctl_mem_pool.c,
ctl_mem_pool.h:		Generic memory pool implementation used by the
			internal frontend.

ctl_private.h:		Private data structres (e.g. CTL softc) and
			function prototypes.  This also includes the SCSI
			vendor and product names used by CTL.

ctl_scsi_all.c,
ctl_scsi_all.h:		CTL wrappers around CAM sense printing functions.

ctl_ser_table.c:	Command serialization table.  This defines what
			happens when one type of command is followed by
			another type of command.

ctl_util.c,
ctl_util.h:		CTL utility functions, primarily designed to be
			used from userland.  See ctladm for the primary
			consumer of these functions.  These include CDB
			building functions.

scsi_ctl.c:		CAM target peripheral driver and CTL frontend port.
			This is the path into CTL for commands from
			target-capable hardware/SIMs.

README.ctl.txt:		CTL code features, roadmap, to-do list.

usr.sbin/Makefile:	Add ctladm.

ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c:		ctladm(8) is the CTL management utility.
			It fills a role similar to camcontrol(8).
			It allow configuring LUNs, issuing commands,
			injecting errors and various other control
			functions.

usr.bin/Makefile:	Add ctlstat.

ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c:	ctlstat(8) fills a role similar to iostat(8).
			It reports I/O statistics for CTL.

sys/conf/files:		Add CTL files.

sys/conf/NOTES:		Add device ctl.

sys/cam/scsi_all.h:	To conform to more recent specs, the inquiry CDB
			length field is now 2 bytes long.

			Add several mode page definitions for CTL.

sys/cam/scsi_all.c:	Handle the new 2 byte inquiry length.

sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c:	Update for 2 byte inquiry length field.

scsi_da.h:		Add versions of the format and rigid disk pages
			that are in a more reasonable format for CTL.

amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC:	Add device ctl.

i386/conf/PAE:		The CTL frontend SIM at least does not compile
			cleanly on PAE.

Sponsored by:	Copan Systems, SGI and Spectra Logic
MFC after:	1 month
2012-01-12 00:34:33 +00:00
mav
fdb02172b9 Add support for CDRIOCGETBLOCKSIZE and CDRIOCSETBLOCKSIZE IOCTLs to control
sector size same as acd driver does. Together with r228808 and r228847 this
allows existing multimedia/vlc to play Audio CDs via CAM cd driver.

PR:		ports/162190
MFC after:	1 week
2012-01-03 17:04:09 +00:00
mav
480087a797 Remove unneeded checks for CAM_DEV_QFRZN after cam_periph_runccb() call.
cam_periph_runccb() since the beginning checks it and releases device queue.
After r203108 it even clears CAM_DEV_QFRZN flag after that to avoid double
release, so removed code is unreachable now.

MFC after:	1 month
2012-01-02 17:02:45 +00:00
mav
3af226a4aa Report stripeoffset as zero not stripesize if physical block is zero
aligned, same as it is done for ATA.
2011-12-23 20:59:13 +00:00
mav
b63346bb14 Addition to r228808:
READ CD is a 12 byte command. So fill additional bytes and update CDB length
when patching READ(10).

MFC after:	1 month
2011-12-23 19:53:28 +00:00
mav
b9b25a56e0 Use READ CAPACITY(16) to get information about device physical sectors.
As soon as not all devices support READ CAPACITY(16), automatically fall
back to READ CAPACITY(10) if CAM_REQ_INVALID or SSD_KEY_ILLEGAL_REQUEST
status returned.

It also provides first bits of information about Logical Block Provisioning
(aka UNMAP/TRIM) support by the device.
2011-12-23 19:12:02 +00:00
mav
9aa2906575 Merge to da driver quirks hinting 4K physical sector sizes for SATA disks
connected via SAS or USB. Unluckily I've found that SAS (mps) and USB-SATA
I have translate models in different ways, requiring twice more quirks.
Unluckily for Hitachi, their model names are trimmed on SAS, making
impossible to identify 4K sector drives that way.
2011-12-23 00:10:17 +00:00
mav
1e9400b5aa Make cd driver to handle Audio CDs, reporting their 2352 bytes sectors to
GEOM and using READ CD command for reading data, same as acd driver does.
Audio CDs identified by checking respective bit of the control field of
the first track in TOC.

This fixes bunch of error messages during boot (GEOM taste) with Audio CD
inserted and allows to grab Audio CD image using just dd.

MFC after:	1 month
2011-12-22 16:40:35 +00:00
ed
145914e3e7 Change targ(4) to use cdevpriv, instead of multiple character devices.
Also update the manpage and the scsi_target example program accordingly.

Discussed on:	scsi@
Tested by:	Chuck Tuffli <chuck tuffli net>
2011-12-13 21:26:33 +00:00
mdf
1fdb5a1e7a Do not use the sometimes-reserved work 'bool' for a variable name.
MFC after:	2 weeks
Sponsored by:	Isilon Systems, LLC
2011-12-12 18:43:18 +00:00
eadler
cccae27184 - Add support for Support SEAGATE DAT Scopion 130
PR:		kern/141934
Submitted by:	HASHI Hiroaki <hashiz@stenmark.meridiani.jp>
Approved by:	sbruno@
MFC after:	1 week
2011-12-08 03:20:48 +00:00
eadler
6efa0e7f22 - fix duplicate "a a" in some comments
Submitted by:	eadler
Approved by:	simon
MFC after:	3 days
2011-11-13 17:06:33 +00:00
ed
0c56cf839d Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
ed
e97eae1577 Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
ken
949394e8e0 Add descriptor sense support to CAM, and honor sense residuals properly in
CAM.

Desriptor sense is a new sense data format that originated in SPC-3.  Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.

This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.

This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.

camcontrol.c:	Change uses of scsi_extract_sense() to use
		scsi_extract_sense_len().

		Use scsi_get_sks() instead of accessing sense key specific
		data directly.

scsi_modes:	Update the control mode page to the latest version (SPC-4).

scsi_cmds.c,
scsi_target.c:	Change references to struct scsi_sense_data to struct
		scsi_sense_data_fixed.  This should be changed to allow the
		user to specify fixed or descriptor sense, and then use
		scsi_set_sense_data() to build the sense data.

ps3cdrom.c:	Use scsi_set_sense_data() instead of setting sense data
		manually.

cam_periph.c:	Use scsi_extract_sense_len() instead of using
		scsi_extract_sense() or accessing sense data directly.

cam_ccb.h:	Bump the CAM_VERSION from 0x15 to 0x16.  The change of
		struct scsi_sense_data from 32 to 252 bytes changes the
		size of struct ccb_scsiio, but not the size of union ccb.
		So the version must be bumped to prevent structure
		mis-matches.

scsi_all.h:	Lots of updated SCSI sense data and other structures.

		Add function prototypes for the new sense data functions.

		Take out the inline implementation of scsi_extract_sense().
		It is now too large to put in a header file.

		Add macros to calculate whether fields are present and
		filled in fixed and descriptor sense data

scsi_all.c:	In scsi_op_desc(), allow the user to pass in NULL inquiry
		data, and we'll assume a direct access device in that case.

		Changed the SCSI RESERVED sense key name and description
		to COMPLETED, as it is now defined in the spec.

		Change the error recovery action for a number of read errors
		to prevent lots of retries when the drive has said that the
		block isn't accessible.  This speeds up reconstruction of
		the block by any RAID software running on top of the drive
		(e.g. ZFS).

		In scsi_sense_desc(), allow for invalid sense key numbers.
		This allows calling this routine without checking the input
		values first.

		Change scsi_error_action() to use scsi_extract_sense_len(),
		and handle things when invalid asc/ascq values are
		encountered.

		Add a new routine, scsi_desc_iterate(), that will call the
		supplied function for every descriptor in descriptor format
		sense data.

		Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
		which build descriptor and fixed format sense data.  They
		currently default to fixed format sense data.

		Add a number of scsi_get_*() functions, which get different
		types of sense data fields from either fixed or descriptor
		format sense data, if the data is present.

		Add a number of scsi_*_sbuf() functions, which print
		formatted versions of various sense data fields.  These
		functions work for either fixed or descriptor sense.

		Add a number of scsi_sense_*_sbuf() functions, which have a
		standard calling interface and print the indicated field.
		These functions take descriptors only.

		Add scsi_sense_desc_sbuf(), which will print a formatted
		version of the given sense descriptor.

		Pull out a majority of the scsi_sense_sbuf() function and
		put it into scsi_sense_only_sbuf().  This allows callers
		that don't use struct ccb_scsiio to easily utilize the
		printing routines.  Revamp that function to handle
		descriptor sense and use the new sense fetching and
		printing routines.

		Move scsi_extract_sense() into scsi_all.c, and implement it
		in terms of the new function, scsi_extract_sense_len().
		The _len() version takes a length (which should be the
		sense length - residual) and can indicate which fields are
		present and valid in the sense data.

		Add a couple of new scsi_get_*() routines to get the sense
		key, asc, and ascq only.

mly.c:		Rename struct scsi_sense_data to struct
		scsi_sense_data_fixed.

sbp_targ.c:	Use the new sense fetching routines to get sense data
		instead of accessing it directly.

sbp.c:		Change the firewire/SCSI sense data transformation code to
		use struct scsi_sense_data_fixed instead of struct
		scsi_sense_data.  This should be changed later to use
		scsi_set_sense_data().

ciss.c:		Calculate the sense residual properly.  Use
		scsi_get_sense_key() to fetch the sense key.

mps_sas.c,
mpt_cam.c:	Set the sense residual properly.

iir.c:		Use scsi_set_sense_data() instead of building sense data by
		hand.

iscsi_subr.c:	Use scsi_extract_sense_len() instead of grabbing sense data
		directly.

umass.c:	Use scsi_set_sense_data() to build sense data.

		Grab the sense key using scsi_get_sense_key().

		Calculate the sense residual properly.

isp_freebsd.h:	Use scsi_get_*() routines to grab asc, ascq, and sense key
		values.

		Calculate and set the sense residual.

MFC after:	3 days
Sponsored by:	Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
gibbs
59e398752a cam/scsi/scsi_cd.c:
In cdregister(), hold the periph lock semaphore during changer
	probe/configuration.  This removes a window where an open of the
	cd device may succeed before probe processing has completed.
2011-06-26 01:32:46 +00:00
will
32b96d6808 Return CAM_REQ_INVALID if the SCSI XPT receives an unsupported operation
via the XPT_DEV_ADVINFO CCB.

Reviewed by:	ken
2011-06-22 22:55:51 +00:00
gibbs
094b6aca1d Plumb device physical path reporting from CAM devices, through GEOM and
DEVFS, and make it accessible via the diskinfo utility.

Extend GEOM's generic attribute query mechanism into generic disk consumers.
sys/geom/geom_disk.c:
sys/geom/geom_disk.h:
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
	- Allow disk providers to implement a new method which can override
	  the default BIO_GETATTR response, d_getattr(struct bio *).  This
	  function returns -1 if not handled, otherwise it returns 0 or an
	  errno to be passed to g_io_deliver().

sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
	- Don't copy the serial number to dp->d_ident anymore, as the CAM XPT
	  is now responsible for returning this information via
	  d_getattr()->(a)dagetattr()->xpt_getatr().

sys/geom/geom_dev.c:
	- Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM
	  attribute "GEOM::physpath", if possible.  If the attribute request
	  returns a zero-length string, ENOENT is returned.

usr.sbin/diskinfo/diskinfo.c:
	- If the DIOCGPHYSPATH ioctl is successful, report physical path
	  data when diskinfo is executed with the '-v' option.

Submitted by:	will
Reviewed by:	gibbs
Sponsored by:	Spectra Logic Corporation

Add generic attribute change notification support to GEOM.

sys/sys/geom/geom.h:
	Add a new attrchanged method field to both g_class
	and g_geom.

sys/sys/geom/geom.h:
sys/geom/geom_event.c:
	- Provide the g_attr_changed() function that providers
	  can use to advertise attribute changes.
	- Perform delivery of attribute change notifications
	  from a thread context via the standard GEOM event
	  mechanism.

sys/geom/geom_subr.c:
	Inherit the attrchanged method from class to geom (class instance).

sys/geom/geom_disk.c:
	Provide disk_attr_changed() to provide g_attr_changed() access
	to consumers of the disk API.

sys/cam/scsi/scsi_pass.c:
sys/cam/scsi/scsi_da.c:
sys/geom/geom_dev.c:
sys/geom/geom_disk.c:
	Use attribute changed events to track updates to physical path
	information.

sys/cam/scsi/scsi_da.c:
	Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
	events for this driver.  When this event occurs, and
	the updated buffer type references our physical path
	attribute, emit a GEOM attribute changed event via the
	disk_attr_changed() API.

sys/cam/scsi/scsi_pass.c:
	Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
	events for this driver.  When this event occurs, update
	the physical patch devfs alias for this pass instance.

Submitted by:	gibbs
Sponsored by:	Spectra Logic Corporation
2011-06-14 17:10:32 +00:00
gibbs
896ba7687e sys/cam/scsi/scsi_da.c:
- Only attempt the closing synchronize cache on a disk
	  if it is still there.
	- When a device is lost, report the number of outstanding
	  I/Os as they are drained.
	- When a device is lost, return any unprocessed bios with
	  ENXIO instead of EIO.
	- Filter asynchronous events, but always allow cam_periph_async()
	  to see them too.

Sponsored by:	Spectra Logic Corporation
2011-06-14 16:05:00 +00:00
gibbs
19d8ec29e2 Lay groundwork in CAM for recording and reporting physical path and
other device attributes stored in the CAM Existing Device Table (EDT).
This includes some infrastructure requried by the enclosure services
driver to export physical path information.

Make the CAM device advanced info interface accept store requests.

  sys/cam/scsi/scsi_all.c:
  sys/cam/scsi/scsi_all.h:
	- Replace scsi_get_sas_addr() with a scsi_get_devid() which takes
	  a callback that decides whether to accept a particular descriptor.
	  Provide callbacks for NAA IEEE Registered addresses and for SAS
	  addresses, replacing the old function.  This is needed because
	  the old function doesn't work for an enclosure address for a SAS
	  device, which is not flagged as a SAS address, but is NAA IEEE
	  Registered.  It may be worthwhile merging this interface with the
	  devid match interface.
	- Add a few more defines for some device ID fields.

  sbin/camcontrol/camcontrol.c:
	- Update for the CCB_DEV_ADVINFO interface change.

  cam/cam_xpt_internal.h:
	- Add the new fields for the physical path string to the CAM EDT.
  cam/cam_ccb.h:
	- Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb
	  structure to ccb_dev_advinfo.
	- Add a flag that changes this CCB's action to store, rather than
	  the default, retrieve.
	- Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT
	  physpath field.
	- Remove the never-implemented transport & proto flags.
  cam/cam_xpt.c:
  cam/cam_xpt.h:
	- Add xpt_getattr(), which provides a wrapper for fetching a device's
	  attribute using the GEOM strings as key.  This method currently
	  supports "GEOM::ident" and "GEOM::physpath".

Submitted by: will
Reviewed by : gibbs

Extend the XPT_DEV_MATCH api to allow a device search by device ID.
As far as the API is concerned, device ID is a binary blob to be
interpreted by the transport layer.  The SCSI implementation assumes
it is an array of VPD device ID descriptors.

  sys/cam/cam_ccb.h:
	Create a new structure, device_id_match_pattern, and
	update the XPT_DEV_MATCH datastructures and flags so
	that this pattern type can be used.

  sys/cam/cam_xpt.c:
	- A single pattern matching on both inquiry data and device
	  ID is invalid.  Report any violators.
	- Pass device ID match requests through to the new routine
	  scsi_devid_match().  The direct call of a SCSI routine is
	  a layering violation, but no worse than the one a few
	  lines up that checks inquiry data.  Defer cleaning this
	  up until our future, larger, rototilling of CAM.
	- Zero out cam_ed and cam_et nodes on allocation.  Prior to
	  this change, device_id_len and device_id were not inialized,
	  preventing proper detection of the presence of this
	  information.

  sys/cam/scsi/scsi_all.c:
  sys/cam/scsi/scsi_all.h:
	Add the scsi_match_devid() routine.

Add a helper function for extracting peripherial driver names

  sys/cam/cam_periph.c:
  sys/cam/cam_periph.h:
	Add the cam_periph_list() method which fills an sbuf
	with a comma delimited list of the peripheral instances
	associated with a given CAM path.

Add a helper functions for SCSI commands used by the SES driver.

  sys/cam/scsi/scsi_all.c:
  sys/cam/scsi/scsi_all.h:
	Add structure definitions and csio filling functions for
	the receive diagnostic results and send diagnostic commands.

Misc CAM XPT cleanups.

  sys/cam/cam_xpt.c:
	Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED
	events at the time async event handlers are attached
	even when registering just for events on a partitular
	SIM.  Previously, you had to register for these
	events on all SIMs in the system in order to get
	the initial broadcast even though subsequent device
	and path arrivals would be delivered.

  sys/cam/cam_xpt.c:
	Remove SIM mutex held asserts from path accessors.
	CAM paths are reference counted and it is this
	reference count, not the sim mutex, that garantees
	they are stable.

Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
mav
73bcdbfb76 Change new constant names to ones used by OpenSolaris. 2011-05-27 03:44:47 +00:00
mav
44b4091060 Add names for few more SES element types according SES-2 specification. 2011-05-27 03:23:39 +00:00
avg
5c9c528165 scsi_cd: silence READ_TOC errors in CDIOREADTOCHEADER ioctl
An optical disk may not have a TOC (e.g. for blank media) and userland
software may legitimately try to use CDIOREADTOCHEADER to find out about
the TOC.

Silence from:	scsi@
MFC after:	10 days
2011-05-07 10:06:43 +00:00
jh
5bd2e54fe3 Move a comment to the right place. The rearrange done in r208928 left
the comment to a wrong place.
2011-04-16 08:38:11 +00:00
jh
4cd56ff29f Move TUNABLE_INT_FETCH() out of the SIM lock to avoid sleeping while
holding the lock. The fix is analogous to r220618 for ada(4).

Reviewed by:	mav
2011-04-16 06:54:41 +00:00
mav
9bc238fc03 Make CAM report devices with ATA/SATA transport to devstat(9) as IDE. 2011-04-14 21:25:32 +00:00
nwhitehorn
76f2936a08 Missed a file in r219056: add disk description for da(4). 2011-02-26 23:30:32 +00:00
nwhitehorn
3fa7ecd613 Add the disk ident and a human-meaningful description (here, the disk model
string) to the geom_disk config XML so that they are easily accessible from
userland.

MFC after:	1 week
2011-02-26 14:58:54 +00:00
brucec
6d9b42b486 Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
mdf
6648b8cede sysctl(8) should use the CTLTYPE to determine the type of data when
reading.  (This was already done for writing to a sysctl).  This
requires all SYSCTL setups to specify a type.  Most of them are now
checked at compile-time.

Remove SYSCTL_*X* sysctl additions as the print being in hex should be
controlled by the -x flag to sysctl(8).

Succested by:	bde
2011-01-19 17:04:07 +00:00
mdf
c6121061dc Add a 64-bit hex-printed sysctl(9) since there is at least one place in
the code that wanted it.  It is named X64 rather than XQUAD since the
quad name is a historical abomination that should not be perpetuated.
2011-01-13 18:20:33 +00:00
ken
ff1d787db7 Fix a few issues related to the XPT_GDEV_ADVINFO CCB.
camcontrol.c:	In buildbusdevlist(), don't attempt to get call
		getdevid() for an unconfigured device, even when the
		verbose flag is set.  The cam_open_btl() call will almost
		certainly fail.

		Probe for the buffer size when issuing the XPT_GDEV_ADVINFO
		CCB.  Probing for the buffer size first helps us avoid
		allocating the maximum buffer size when it really may not
		be necessary.  This also helps avoid errors from
		cam_periph_mapmem() if we attempt to map more than MAXPHYS.

cam_periph.c:	In cam_periph_mapmem(), if the XPT_GDEV_ADVINFO CCB
		shows a bufsiz of 0, we don't have anything to map,
		so just return.

		Also, set the maximum mapping size to MAXPHYS
		instead of DFLTPHYS for XPT_GDEV_ADVINFO CCBs,
		since they don't actually go down to the hardware.

scsi_pass.c:	Don't bother mapping the buffer in XPT_GDEV_ADVINFO
		CCBs if bufsiz is 0.
2010-12-10 21:38:51 +00:00
ken
7f0ccdf947 Add Serial Management Protocol (SMP) passthrough support to CAM.
This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.

The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00
to determine supported pages, and will now fetch page 0x83 in addition to
page 0x80 if supported.

Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO.  The SMP CCB is
intended for SMP requests and responses.  The ADVINFO is currently used to
fetch cached VPD page 0x83 data from the transport layer, but is intended
to be extensible to fetch other types of device-specific data.

SMP-only devices are not currently represented in the CAM topology, and so
the current semantics are that the SIM will route SMP CCBs to either the
addressed device, if it contains an SMP target, or its parent, if it
contains an SMP target.  (This is noted in cam_ccb.h, since it will change
later once we have the ability to have SMP-only devices in CAM's topology.)

smp_all.c,
smp_all.h:		New helper routines for SMP.  This includes
			SMP request building routines, response parsing
			routines, error decoding routines, and structure
			definitions for a number of SMP commands.

libcam/Makefile:	Add smp_all.c to libcam, so that SMP functionality
			is available to userland applications.

camcontrol.8,
camcontrol.c:		Add smp passthrough support to camcontrol.  Several
			new subcommands are now available:

			'smpcmd' functions much like 'cmd', except that it
			allows the user to send generic SMP commands.

			'smprg' sends the SMP report general command, and
			displays the decoded output.  It will automatically
			fetch extended output if it is available.

			'smppc' sends the SMP phy control command, with any
			number of potential options.  Among other things,
			this allows the user to reset a phy on a SAS
			expander, or disable a phy on an expander.

			'smpmaninfo' sends the SMP report manufacturer
			information and displays the decoded output.

			'smpphylist' displays a list of phys on an
			expander, and the CAM devices attached to those
			phys, if any.

cam.h,
cam.c:			Add a status value for SMP errors
			(CAM_SMP_STATUS_ERROR).

			Add a missing description for CAM_SCSI_IT_NEXUS_LOST.

			Add support for SMP commands to cam_error_string().

cam_ccb.h:		Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH.  SMP
			commands are by nature bi-directional, and we may
			need to support bi-directional SCSI commands later.

			Add the XPT_SMP_IO CCB.  Since SMP commands are
			bi-directional, there are pointers for both the
			request and response.

			Add a fill routine for SMP CCBs.

			Add the XPT_GDEV_ADVINFO CCB.  This is currently
			used to fetch cached page 0x83 data from the
			transport later, but is extensible to fetch many
			other types of data.

cam_periph.c:		Add support in cam_periph_mapmem() for XPT_SMP_IO
			and XPT_GDEV_ADVINFO CCBs.

cam_xpt.c:		Add support for executing XPT_SMP_IO CCBs.

cam_xpt_internal.h:	Add fields for VPD pages 0x00 and 0x83 in struct
			cam_ed.

scsi_all.c:		Add scsi_get_sas_addr(), a function that parses
			VPD page 0x83 data and pulls out a SAS address.

scsi_all.h:		Add VPD page 0x00 and 0x83 structures, and a
			prototype for scsi_get_sas_addr().

scsi_pass.c:		Add support for mapping buffers in XPT_SMP_IO and
			XPT_GDEV_ADVINFO CCBs.

scsi_xpt.c:		In the SCSI probe code, first ask the device for
			VPD page 0x00.  If any VPD pages are supported,
			that page is required to be implemented.  Based on
			the response, we may probe for the serial number
			(page 0x80) or device id (page 0x83).

			Add support for the XPT_GDEV_ADVINFO CCB.

sys/conf/files:		Add smp_all.c.

mps.c:			Add support for passing in a uio in mps_map_command(),
			so we can map a S/G list at once.

			Add support for SMP passthrough commands in
			mps_data_cb().  SMP is a special case, because the
			first buffer in the S/G list is outbound and the
			second buffer is inbound.

			Add support for warning the user if the busdma code
			comes back with more buffers than will work for the
			command.  This will, for example, help the user
			determine why an SMP command failed if busdma comes
			back with three buffers.

mps_pci.c:		Add sys/uio.h.

mps_sas.c:		Add the SAS address and the parent handle to the
			list of fields we pull from device page 0 and cache
			in struct mpssas_target.  These are needed for SMP
			passthrough.

			Add support for the XPT_SMP_IO CCB.  For now, this
			CCB is routed to the addressed device if it supports
			SMP, or to its parent if it does not and the parent
			does.  This is necessary because CAM does not
			currently support SMP-only nodes in the topology.

			Make SMP passthrough support conditional on
			__FreeBSD_version >= 900026.  This will make it
			easier to MFC this change to the driver without
			MFCing the CAM changes as well.

mps_user.c:		Un-staticize mpi_init_sge() so we can use it for
			the SMP passthrough code.

mpsvar.h:		Add a uio and iovecs into struct mps_command for
			SMP passthrough commands.

			Add a cm_max_segs field to struct mps_command so
			that we can warn the user if busdma comes back with
			too many segments.

			Clear the cm_reply when a command gets freed.  If
			it is not cleared, reply frames will eventually get
			freed into the pool multiple times and corrupt the
			pool.  (This fix is from scottl.)

			Add a prototype for mpi_init_sge().

sys/param.h:		Bump __FreeBSD_version to 900026 for the for the
			inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO
			CAM CCBs.
2010-11-30 22:39:46 +00:00
mav
4e4dbb9f7a Make da driver to handle some probably broken Android devices, returning
zero media and sector size instead of "Medium not present" error,
until some confirmation button is tapped on device.
2010-10-24 18:53:16 +00:00
mdf
e9f1044ef2 Use destroy_dev_sched(9) instead of destroy_dev(9) in passcleanup() as
it is indirectly a d_close method.

Prompted by:	kib
Reviewed by:	mav
MFC after:	2 weeks
2010-09-20 19:42:14 +00:00
gibbs
6833acab2d Correct bioq_disksort so that bioq_insert_tail() offers barrier semantic.
Add the BIO_ORDERED flag for struct bio and update bio clients to use it.

The barrier semantics of bioq_insert_tail() were broken in two ways:

 o In bioq_disksort(), an added bio could be inserted at the head of
   the queue, even when a barrier was present, if the sort key for
   the new entry was less than that of the last queued barrier bio.

 o The last_offset used to generate the sort key for newly queued bios
   did not stay at the position of the barrier until either the
   barrier was de-queued, or a new barrier (which updates last_offset)
   was queued.  When a barrier is in effect, we know that the disk
   will pass through the barrier position just before the
   "blocked bios" are released, so using the barrier's offset for
   last_offset is the optimal choice.

sys/geom/sched/subr_disk.c:
sys/kern/subr_disk.c:
	o Update last_offset in bioq_insert_tail().

	o Only update last_offset in bioq_remove() if the removed bio is
	  at the head of the queue (typically due to a call via
	  bioq_takefirst()) and no barrier is active.

	o In bioq_disksort(), if we have a barrier (insert_point is non-NULL),
	  set prev to the barrier and cur to it's next element.  Now that
	  last_offset is kept at the barrier position, this change isn't
	  strictly necessary, but since we have to take a decision branch
	  anyway, it does avoid one, no-op, loop iteration in the while
	  loop that immediately follows.

	o In bioq_disksort(), bypass the normal sort for bios with the
	  BIO_ORDERED attribute and instead insert them into the queue
	  with bioq_insert_tail().  bioq_insert_tail() not only gives
	  the desired command order during insertion, but also provides
	  barrier semantics so that commands disksorted in the future
	  cannot pass the just enqueued transaction.

sys/sys/bio.h:
	Add BIO_ORDERED as bit 4 of the bio_flags field in struct bio.

sys/cam/ata/ata_da.c:
sys/cam/scsi/scsi_da.c
	Use an ordered command for SCSI/ATA-NCQ commands issued in
	response to bios with the BIO_ORDERED flag set.

sys/cam/scsi/scsi_da.c
	Use an ordered tag when issuing a synchronize cache command.

	Wrap some lines to 80 columns.

sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
sys/geom/geom_io.c
	Mark bios with the BIO_FLUSH command as BIO_ORDERED.

Sponsored by:	Spectra Logic Corporation
MFC after:	1 month
2010-09-02 19:40:28 +00:00
mjacob
6f82627f96 Revert r211434. Offline discussions have convinced me that this should
be left alone for now.
2010-08-20 17:20:05 +00:00