The fallback for __align_up() used by roundup2() uses __typeof__()
which doesn't work for bitfields. This fixes the build on GCC which
uses the fallback.
Reviewed by: arichardson, markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D28599
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
This change tries to fix the most obvious locking problems.
sbp_cam_scan_lun() is never called with the sbp lock held, so the lock
needs to be acquired internally (if it's needed at all).
Without this change a kernel with INVARIANTS panics when a firewire disk
is connected:
panic: mutex sbp not owned at /usr/src/sys/dev/firewire/sbp.c:967
KDB: stack backtrace:
db_trace_self_wrapper() at 0xffffffff80420bbb = db_trace_self_wrapper+0x2b/frame 0xfffffe0504df0930
kdb_backtrace() at 0xffffffff80670359 = kdb_backtrace+0x39/frame 0xfffffe0504df09e0
vpanic() at 0xffffffff8063986c = vpanic+0x14c/frame 0xfffffe0504df0a20
panic() at 0xffffffff806395b3 = panic+0x43/frame 0xfffffe0504df0a80
__mtx_assert() at 0xffffffff8061c40d = __mtx_assert+0xed/frame 0xfffffe0504df0ac0
sbp_cam_scan_lun() at 0xffffffff80474667 = sbp_cam_scan_lun+0x37/frame 0xfffffe0504df0af0
xpt_done_process() at 0xffffffff802aacfa = xpt_done_process+0x2da/frame 0xfffffe0504df0b30
xpt_done_td() at 0xffffffff802ac2e5 = xpt_done_td+0xd5/frame 0xfffffe0504df0b80
fork_exit() at 0xffffffff805ff72f = fork_exit+0xdf/frame 0xfffffe0504df0bf0
fork_trampoline() at 0xffffffff8082483e = fork_trampoline+0xe/frame
0xfffffe0504df0bf0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
Also, I tried to reduce the scope of the sbp lock to avoid holding it
while doing bus_dma allocations.
The code badly needs some re-engineering. SBP really should implement
a CAM transport, so that it avoids control flow inversion when re-scanning
the bus. Also, the sbp lock seems to be too coarse.
Additionally, the commit includes some changes not related to locking.
- sbp_cam_scan_lun: restore CAM_DEV_QFREEZE before re-queueing the ccb
because xpt_setup_ccb resets ccb_h.flags
- sbp_post_busreset: call xpt_release_simq only if it's actually frozen
- don't place private SIMQ_FREEZED flag (sic, "freezed") into sim->flags,
use sbp->flags for that
- some style fixes and control flow enhancements
Reviewed by: sbruno
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9898
SBP-2 specification defined maximum CDB length as 12 bytes. Newer SBP-3
specification allows CDB of any size, but this driver is too old. Proper
solution would be to look on maximal ORB size supported by the target.
MFC after: 1 week
The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".
This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.
PR: 215474
Reported by: Coverity
CID: 1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID: 1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID: 1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID: 1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID: 1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID: 1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID: 1010035 1010036 1010042 1010041 1010040 1010039
Reviewed by: imp, sephe, slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9037
Differential Revision: https://reviews.freebsd.org/D9038
Zero can be confused for a potentially valid value.
For example, if I load and unload sbp driver I get a lot of messages
like the following:
fw_tl_free: the xfer is not in the queue (tlabel=0, flag=0x0)
send: dst=0x00 tl=0x00 rt=0 tcode=0x0 pri=0x0 src=0x000
recv: dst=0x01 tl=0x21 rt=1 tcode=0x1 pri=0x0 src=0xffc0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe04464407e0
fw_tl_free() at fw_tl_free+0x18d/frame 0xfffffe0446440820
fw_xfer_unload() at fw_xfer_unload+0xca/frame 0xfffffe0446440840
fw_xferlist_remove() at fw_xferlist_remove+0x2f/frame 0xfffffe0446440870
sbp_detach() at sbp_detach+0x1e0/frame 0xfffffe04464408e0
device_detach() at device_detach+0x80/frame 0xfffffe0446440900
devclass_driver_deleted() at devclass_driver_deleted+0x6a/frame 0xfffffe0446440940
devclass_delete_driver() at devclass_delete_driver+0x7d/frame 0xfffffe0446440980
driver_module_handler() at driver_module_handler+0xff/frame 0xfffffe04464409d0
module_unload() at module_unload+0x32/frame 0xfffffe04464409f0
linker_file_unload() at linker_file_unload+0x24b/frame 0xfffffe0446440a40
kern_kldunload() at kern_kldunload+0xbc/frame 0xfffffe0446440a70
amd64_syscall() at amd64_syscall+0x314/frame 0xfffffe0446440bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0446440bf0
MFC after: 2 weeks
Please see section 5.15 of 1394 OHCI Specification.
If the register is not implemented, then the physical response unit is
limited to the first 4GB of the physical memory.
In that case the non-cooperative debugging over firewire (using /dev/fwmem)
can not be expected to work if a target has more RAM than that.
The method is described in gdb.4 and the Developer's Handbook.
It seems that most of the consumer hardware does not implement
PhysicalUpperBound register.
MFC after: 1 week
driver is (or behaves identically to) /dev/mem. Remove the D_MEM flag
from random drivers.
Note that currently the D_MEM flag does not affect any behaviour, but
this going to change in the next commit.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
X-Differential revision: https://reviews.freebsd.org/D6149
systems with more than 4GB of physical memory.
To remotely debug the system 'stealthy' which has a kernel
with this change installed and firewire properly configured:
% fwcontrol -m stealthy (or stealthy's firewire EUI64)
% kgdb kernel /dev/fwmem0.0
sys/dev/firewire/fwohci.c:
Rather than hard code the upper limit for hw based
automatic responses to remote DMA requests at 4GB,
program the hardware using Maxmem, the page number
one higher than the highest physical page detected
in the system.
While here, garbage collect more useless splfw()
calls.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110994 on 2015/01/06
asynchronous remote dma request (DMA request that the
hardware cannot automatically handle).
sys/dev/firewire/firewire.c
In fw_rcv(), add missing early return in the error
path for DMA requests to unregistered regions.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110993 on 2015/01/06
sys/boot/i386/libfirewire/firewire.c:
sys/dev/firewire/firewire.c:
Fix configuration ROM generation count wrapping logic
so that the generation count is never outside of
allowed limits (0x2 -> 0xF).
sys/dev/firewire/firewire.c:
In fw_xfer_unload(), xfer->fc may be NULL. Protect
against this before taking the fc lock.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110685 on 2015/01/05
sys/dev/firewire/firewire.c:
In fw_xfer_unload() expand lock coverage so that
the test for FWXF_INQ doesn't race with it being
cleared in another thread.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110207 on 2015/01/02
sys/dev/firewire/firewire.c:
In fw_xfer_unload(), clear the FWXF_INQ flag on the
xfer under protection of the FW_GMTX, after the
xfer is removeed from the tx/rx queue. Otherwise
it is possible for the xfer to be removed again
(corrupting the list or immediately panicing) from
another thread that has found this xfer in the
transaction label table.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110200 on 2015/01/02
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.
Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.
Also correct isci to correctly resolve ccb timeout.
This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.
Differential Revision: https://reviews.freebsd.org/D1157
Reviewed by: mav, davide
MFC after: 1 month
Sponsored by: Multiplay
Do not pass wrong alignment value to fwdma_malloc_multiseg and ultimately
to contigalloc. In addition to being wrong, this causes insta-panic in
certain cases due to safety assertion - the alignment is required to be
the power of two and the value we calculate here seldom is.
MFC after: 1 month
Commit my version of style(9) pass over the firewire code. Now that
other people have started changing the code carrying this is as a
local patch is not longer a viable option.
MFC after: 1 month
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
The sbp_cam_detach_target can be called from sbp_post_explore function
on the first target that is not really attached and it was written with
the corresponding safety check in place to tolerate that. Unfortunately
the recent locking cleanup did add a locking assertion that tries to
dereference the target->sbp pointer unconditionally, which causes less
than desirable outcome. Since the assertion is useful, just initialize
the target sbp pointer once when sbp device is being initialized instead
of when the target is being attached. This makes assertion work in all
cases and fixes the crash on boot.
- Switch from timeout() to callout_*() for per-request timers.
- Use device_find_child() in the identify routine.
- Use device_printf() instead of passing device_get_nameunit() to
printf().
- Expand the SBP_LOCK coverage simplifying the locking.
- Uninline STAILQ_FOREACH_SAFE().
Tested by: sbruno
Remove old bits of data concat for 'ascii' field.
Remove special SIOCGIFSTATUS handling from if.c (which Coverity yells at).
Reported by: Coverity
Coverity CID: 1147174
MFC after: 2 weeks
