In such cases, the busying of the page and the unlocking of the
containing object by vm_map_pmap_enter() and vm_fault_prefault() is
unnecessary overhead. To eliminate this overhead, this change
modifies pmap_enter_quick() so that it expects the object to be locked
on entry and it assumes the responsibility for busying the page and
unlocking the object if it must sleep. Note: alpha, amd64, i386 and
ia64 are the only implementations optimized by this change; arm,
powerpc, and sparc64 still conservatively busy the page and unlock the
object within every pmap_enter_quick() call.
Additionally, this change is the first case where we synchronize
access to the page's PG_BUSY flag and busy field using the containing
object's lock rather than the global page queues lock. (Modifications
to the page's PG_BUSY flag and busy field have asserted both locks for
several weeks, enabling an incremental transition.)
revision 1.55, the address parameter to vnode_pager_addr() was changed
from an unsigned 32-bit quantity to a signed 64-bit quantity. However,
an out-of-range check on the address was not updated. Consequently,
memory-mapped I/O on files greater than 2GB could cause a kernel panic.
Since the address is now a signed 64-bit quantity, the problem resolution
is simply to remove a cast.
Reviewed by: bde@ and tegge@
PR: 73010
MFC after: 1 week
to implement the sanity check should have been changed when we converted
the implementation of vm_pindex_t from 32 to 64 bits. (Thus, RELENG_4 is
not affected.) The consequence of this error would be a legimate write to
an extremely large file being treated as an errant attempt to write meta-
data.
Discussed with: tegge@
Historically, our contigmalloc1() and contigmalloc2() assumes
that a page in PQ_CACHE can be unconditionally reused by busying
and freeing it. Unfortunatelly, when object happens to be not
NULL, the code will set m->object to NULL and disregard the fact
that the page is actually in the VM page bucket, resulting in
page bucket hash table corruption and finally, a filesystem
corruption, or a 'page not in hash' panic.
This commit has borrowed the idea taken from DragonFlyBSD's fix
to the VM fix by Matthew Dillon[1]. This version of patch will
do the following checks:
- When scanning pages in PQ_CACHE, check hold_count and
skip over pages that are held temporarily.
- For pages in PQ_CACHE and selected as candidate of being
freed, check if it is busy at that time.
Note: It seems that this is might be unrelated to kern/72539.
Obtained from: DragonFlyBSD, sys/vm/vm_contig.c,v 1.11 and 1.12 [1]
Reminded by: Matt Dillon
Reworked by: alc
MFC After: 1 week
instead of a vnode for it.
The vnode_pager does not and should not have any interest in what
the filesystem uses for backend.
(vfs_cluster doesn't use the backing store argument.)
includes the latter, but also declares variables which are defined
in kern/subr_param.c).
Change som VM parameters from quad_t to unsigned long. They refer to
quantities (size limits for text, heap and stack segments) which must
necessarily be smaller than the size of the address space, so long is
adequate on all platforms.
MFC after: 1 week
number of entries into bucket_zone_lookup(), which helps make more
clear the logic of consumers of bucket zones.
Annotate the behavior of bucket_init() with a comment indicating
how the various data structures, including the bucket lookup tables,
are initialized.
swapoff: failed to locate %d swap blocks
The race occurred because putpages() can block between the time it
allocates swap space and the time it updates the swap metadata to
associate that space with a vm_object, so swapoff() would complain
about the temporary inconsistency. I hoped to fix this by making
swp_pager_getswapspace() and swp_pager_meta_build() a single atomic
operation, but that proved to be inconvenient. With this change,
swapoff() simply doesn't attempt to be so clever about detecting when
all the pageout activity to the target device should have drained.
because this call is only needed to wake threads that slept when they
discovered a dead object connected to a vnode. To eliminate unnecessary
calls to wakeup() by vnode_pager_dealloc(), introduce a new flag,
OBJ_DISCONNECTWNT.
Reviewed by: tegge@
thread is created rather than adjusting the priority in the main
function. (kthread_create() should probably take the initial priority
as an argument.)
- Only yield the CPU in the !PREEMPTION case if there are any other
runnable threads. Yielding when there isn't anything else better to do
just wastes time in pointless context switches (albeit while the system
is idle.)
In order to avoid livelock, swapoff() skips over objects with a
nonzero pip count and makes another pass if necessary. Since it is
impossible to know which objects we care about, it would choose an
arbitrary object with a nonzero pip count and wait for it before
making another pass, the theory being that this object would finish
paging about as quickly as the ones we care about. Unfortunately,
we may have slept since we acquired a reference to this object.
Hack around this problem by tsleep()ing on the pointer anyway, but
timeout after a fixed interval. More elegant solutions are possible,
but the ones I considered unnecessarily complicate this rare case.
Also, kill some nits that seem to have crept into the swapoff() code
in the last 75 revisions or so:
- Don't pass both sp and sp->sw_used to swap_pager_swapoff(), since
the latter can be derived from the former.
- Replace swp_pager_find_dev() with something simpler. There's no
need to iterate over the entire list of swap devices just to determine
if a given block is assigned to the one we're interested in.
- Expand the scope of the swhash_mtx in a couple of places so that it
isn't released and reacquired once for every hash bucket.
- Don't drop the swhash_mtx while holding a reference to an object.
We need to lock the object first. Unfortunately, doing so would
violate the established lock order, so use VM_OBJECT_TRYLOCK() and
try again on a subsequent pass if the object is already locked.
- Refactor swp_pager_force_pagein() and swap_pager_swapoff() a bit.
need for most calls to vm_page_busy(). Specifically, most calls to
vm_page_busy() occur immediately prior to a call to vm_page_remove().
In such cases, the containing vm object is locked across both calls.
Consequently, the setting of the vm page's PG_BUSY flag is not even
visible to other threads that are following the synchronization
protocol.
This change (1) eliminates the calls to vm_page_busy() that
immediately precede a call to vm_page_remove() or functions, such as
vm_page_free() and vm_page_rename(), that call it and (2) relaxes the
requirement in vm_page_remove() that the vm page's PG_BUSY flag is
set. Now, the vm page's PG_BUSY flag is set only when the vm object
lock is released while the vm page is still in transition. Typically,
this is when it is undergoing I/O.
IF INVARIANTS is defined, and in the rare case that we have
allocated some objects from the slab and at least one initializer
on at least one of those objects failed, and we need to fail the
allocation and push the uninitialized items back into the slab
caches -- in that scenario, we would fail to [re]set the
bucket cache's ub_bucket item references to NULL, which would
eventually trigger a KASSERT.
We keep si_bsize_phys around for now as that is the simplest way to pull
the number out of disk device drivers in devfs_open(). The correct solution
would be to do an ioctl(DIOCGSECTORSIZE), but the point is probably mooth
when filesystems sit on GEOM, so don't bother for now.
Extend it with a strategy method.
Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY
song and dance.
Rename ibwrite to bufwrite().
Move the two NFS buf_ops to more sensible places, add bufstrategy
to them.
Add inlines for bwrite() and bstrategy() which calls through
buf->b_bufobj->b_ops->b_{write,strategy}().
Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
vm_page_sleep_if_busy(). (The motivation being to transition
synchronization of the vm_page's PG_BUSY flag from the global page queues
lock to the per-object lock.)
that indicates that the caller does not want a page with its busy flag set.
In many places, the global page queues lock is acquired and released just
to clear the busy flag on a just allocated page. Both the allocation of
the page and the clearing of the busy flag occur while the containing vm
object is locked. So, the busy flag might as well never be set.
Initialize b_bufobj for all buffers.
Make incore() and gbincore() take a bufobj instead of a vnode.
Make inmem() local to vfs_bio.c
Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj)
also VI_MTX() to BO_MTX(),
Make buf_vlist_add() take a bufobj instead of a vnode.
Eliminate other uses of bp->b_vp where bp->b_bufobj will do.
Various minor polishing: remove "register", turn panic into KASSERT,
use new function declarations, TAILQ_FOREACH_SAFE() etc.
