were cherry picked up the upstream OpenBSD repository. At some point we
will look at doing another import, but the diffs are substantial and will
require some careful testing.
Differential Revision: https://reviews.freebsd.org/D25021
MFC after: 2 weeks
Submitted by: gbe
Reviewed by: myself, bcr
An integrity check such as a check-hash or a cross-correlation failed.
The integrity error falls between EINVAL that identifies errors in
parameters to a system call and EIO that identifies errors with the
underlying storage media. EINTEGRITY is typically raised by intermediate
kernel layers such as a filesystem or an in-kernel GEOM subsystem when
they detect inconsistencies. Uses include allowing the mount(8) command
to return a different exit value to automate the running of fsck(8)
during a system boot.
These changes make no use of the new error, they just add it. Later
commits will be made for the use of the new error number and it will
be added to additional manual pages as appropriate.
Reviewed by: gnn, dim, brueffer, imp
Discussed with: kib, cem, emaste, ed, jilles
Differential Revision: https://reviews.freebsd.org/D18765
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
- Add a new "qsize" parameter in audit_control and the getacqsize(3) API to
query it, allowing to set the kernel's maximum audit queue length.
- Add support to push a mapping between audit event names and event numbers
into the kernel (where supported) using new A_GETEVENT and A_SETEVENT
auditon(2) operations.
- Add audit event identifiers for a number of new (and not-so-new) FreeBSD
system calls including those for asynchronous I/O, thread management, SCTP,
jails, multi-FIB support, and misc. POSIX interfaces such as
posix_fallocate(2) and posix_fadvise(2).
- On operating systems supporting Capsicum, auditreduce(1) and praudit(1) now
run sandboxed.
- Empty "flags" and "naflags" fields are now permitted in audit_control(5).
Many thanks to Christian Brueffer for producing the OpenBSM release and
importing/tagging it in the vendor branch. This release will allow improved
auditing of a range of new FreeBSD functionality, as well as non-traditional
events (e.g., fine-grained I/O auditing) not required by the Orange Book or
Common Criteria.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, AFRL
MFC after: 3 weeks
contrib/openbsm and a subset also imported into sys/security/audit.
This patch release addresses several minor issues:
- Fixes to AUT_SOCKUNIX token parsing.
- IPv6 support for au_to_me(3).
- Improved robustness in the parsing of audit_control, especially long
flags/naflags strings and whitespace in all fields.
- Add missing conversion of a number of FreeBSD/Mac OS X errnos to/from BSM
error number space.
MFC after: 3 weeks
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
Approved by: re (kib)
OpenBSM history for imported revision below for reference.
MFC after: 2 weeks
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1
- Change auditon(2) parameters and data structures to be 32/64-bit architecture
independent. Add more information to man page about auditon(2) parameters.
- Add wrapper functions for auditon(2) to use legacy commands when the new
commands are not supported.
- Add default for 'expire-after' in audit_control to expire trail files when
the audit directory is more than 10 megabytes ('10M').
- Interface to convert between local and BSM fcntl(2) command values has been
added: au_bsm_to_fcntl_cmd(3) and au_fcntl_cmd_to_bsm(3), along with
definitions of constants in audit_fcntl.h.
- A bug, introduced in OpenBSM 1.1 alpha 4, in which AUT_RETURN32 tokens
generated by audit_submit(3) were improperly encoded has been fixed.
- Fix example in audit_submit(3) man page. Also, make it clear that we want
the audit ID as the argument.
- A new audit event class 'aa', for post-login authentication and
authorization events, has been added.
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge).
OpenBSM history for imported revision below for reference.
MFC after: 1 month
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 beta 1
- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
For legacy support no suffix defaults to bytes.
- Audit trail log expiration support added. It is configured in
audit_control(5) with the expire-after parameter. If there is no
expire-after parameter in audit_control(5), the default, then the audit
trail files are not expired and removed. See audit_control(5) for
more information.
- Change defaults in audit_control: warn at 5% rather than 20% free for audit
partitions, rotate automatically at 2mb, and set the default policy to
cnt,argv rather than cnt so that execve(2) arguments are captured if
AUE_EXECVE events are audited. These may provide more usable defaults for
many users.
- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
au_to_socket_ex(3) arguments to BSM format.
- Fix error encoding AUT_IPC_PERM tokens.
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Hook up bsm_domain.c and bsm_socket_type.c to the libbsm
build along with man pages, add audit_bsm_domain.c and
audit_bsm_socket_type.c to the kernel environment.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 5
- Stub libauditd(3) man page added.
- All BSM error number constants with BSM_ERRNO_.
- Interfaces to convert between local and BSM socket types and protocol
families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
of constants in audit_domain.h and audit_socket_type.h. This improves
interoperability by converting local constant spaces, which vary by OS, to
and from Solaris constants (where available) or OpenBSM constants for
protocol domains not present in Solaris (a fair number). These routines
should be used when generating and interpreting extended socket tokens.
- Fix build warnings with full gcc warnings enabled on most supported
platforms.
- Don't compile error strings into bsm_errno.c when building it in the kernel
environment.
- When started by launchd, use the label com.apple.auditd rather than
org.trustedbsd.auditd.
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Add libauditd build parts and add to auditd's linkage;
force libbsm to build before libauditd.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This buge.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
contrib/openbsm (svn merge) and sys/{bsm,security/audit} (manual merge).
- Add OpenBSM contrib tree to include paths for audit(8) and auditd(8).
- Merge support for new tokens, fixes to existing token generation to
audit_bsm_token.c.
- Synchronize bsm includes and definitions.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
--
OpenBSM 1.1 alpha 2
- Include files in OpenBSM are now broken out into two parts: library builds
required solely for user space, and system includes, which may also be
required for use in the kernels of systems integrating OpenBSM. Submitted
by Stacey Son.
- Configure option --with-native-includes allows forcing the use of native
include for system includes, rather than the versions bundled with OpenBSM.
This is intended specifically for platforms that ship OpenBSM, have adapted
versions of the system includes in a kernel source tree, and will use the
OpenBSM build infrastructure with an unmodified OpenBSM distribution,
allowing the customized system includes to be used with the OpenBSM build.
Submitted by Stacey Son.
- Various strcpy()'s/strcat()'s have been changed to strlcpy()'s/strlcat()'s
or asprintf(). Added compat/strlcpy.h for Linux.
- Remove compatibility defines for old Darwin token constant names; now only
BSM token names are provided and used.
- Add support for extended header tokens, which contain space for information
on the host generating the record.
- Add support for setting extended host information in the kernel, which is
used for setting host information in extended header tokens. The
audit_control file now supports a "host" parameter which can be used by
auditd to set the information; if not present, the kernel parameters won't
be set and auditd uses unextended headers for records that it generates.
OpenBSM 1.1 alpha 1
- Add option to auditreduce(1) which allows users to invert sense of
matching, such that BSM records that do not match, are selected.
- Fix bug in audit_write() where we commit an incomplete record in the
event there is an error writing the subject token. This was submitted
by Diego Giagio.
- Build support for Mac OS X 10.5.1 submitted by Eric Hall.
- Fix a bug which resulted in host XML attributes not being arguments so
that const strings can be passed as arguments to tokens. This patch was
submitted by Xin LI.
- Modify the -m option so users can select more then one audit event.
- For Mac OS X, added Mach IPC support for audit trigger messages.
- Fixed a bug in getacna() which resulted in a locking problem on Mac OS X.
- Added LOG_PERROR flag to openlog when -d option is used with auditd.
- AUE events added for Mac OS X Leopard system calls.
since the last import:
OpenBSM 1.0
- Fix bug in auditreduce(8) which resulted in a memory fault/crash when
the user specified an event name with -m.
- Remove AU_.* hard-coded audit class constants, as udit classes are now
entirely dynamically configured using /etc/security/audit_class.
MFC after: 3 days
Obtained from: TrustedBSD Project
history since the last import:
OpenBSM 1.0 alpha 15
- Fix bug when processing in_addr_ex tokens.
- Restore the behavior of printing the string/text specified while
auditing arg32 tokens.
- Synchronized audit event list to Solaris, picking up the *at(2) system call
definitions, now required for FreeBSD and Linux. Added additional events
for *at(2) system calls not present in Solaris.
- Bugs in auditreduce(8) fixed allowing partial date strings to be used in
filtering events.
Approved by: re (hrs)
MFC after: 3 weeks
Obtained from: TrustedBSD Project
history notes since the last import:
OpenBSM 1.0 alpha 14
- Fix endian issues when processing IPv6 addresses for extended subject
and process tokens.
- gcc41 warnings clean.
- Teach audit_submit(3) about getaudit_addr(2).
- Add support for zonename tokens.
OpenBSM 1.0 alpha 13
- compat/clock_gettime.h now provides a compatibility implementation of
clock_gettime(), which fixes building on Mac OS X.
- Countless man page improvements, markup fixes, content fixs, etc.
- XML printing support via "praudit -x".
- audit.log.5 expanded to include additional BSM token types.
- Added encoding and decoding routines for process64_ex, process32_ex,
subject32_ex, header64, and attr64 tokens.
- Additional audit event identifiers for listen, mlockall/munlockall,
getpath, POSIX message queues, and mandatory access control.
Approved by: re (bmah)
MFC after: 3 weeks
Obtained from: TrustedBSD Project
history notes since the last import:
OpenBSM 1.0 alpha 12
- Correct bug in auditreduce which prevented the -c option from working
correctly when the user specifies to process successful or failed events.
The problem stemmed from not having access to the return token at the time
the initial preselection occurred, but now a second preselection process
occurs while processing the return token.
- getacfilesz(3) API added to read new audit_control(5) filesz setting,
which auditd(8) now sets the kernel audit trail rotation size to.
- auditreduce(1) now uses stdin if no file names are specified on the command
line; this was the documented behavior previously, but it was not
implemented. Be more specific in auditreduce(1)'s examples section about
what might be done with the output of auditreduce.
- Add audit_warn(5) closefile event so that administrators can hook
termination of an audit trail file. For example, this might be used to
compress the trail file after it is closed.
- auditreduce(1) now uses regular expressions for pathname matching. Users can
now supply one or more (comma delimited) regular expressions for searching
the pathnames. If one of the regular expressions is prefixed with a tilde
(~), and a path matches, it will be excluded from the search results.
MFC after: 3 days
Obtained from: TrustedBSD Project
notes since the last import:
OpenBSM 1.0 alpha 11
- Reclassify certain read/write operations as having no class rather than the
fr/fw class; our default classes audit intent (open) not operations (read,
write).
- Introduce AUE_SYSCTL_WRITE event so that BSD/Darwin systems can audit reads
and writes of sysctls as separate events. Add additional kernel
environment and jail events for FreeBSD.
- Break AUDIT_TRIGGER_OPEN_NEW into two events, AUDIT_TRIGGER_ROTATE_USER
(issued by the user audit(8) tool) and AUDIT_TRIGGER_ROTATE_KERNEL (issued
by the kernel audit implementation) so that they can be distinguished.
- Disable rate limiting of rotate requests; as the kernel doesn't retransmit
a dropped request, the log file will otherwise grow indefinitely if the
trigger is dropped.
- Improve auditd debugging output.
- Fix a number of threading related bugs in audit_control file reading
routines.
- Add APIs au_poltostr() and au_strtopol() to convert between text
representations of audit_control policy flags and the flags passed to
auditon(A_SETPOLICY) and retrieved from auditon(A_GETPOLICY).
- Add API getacpol() to return the 'policy:' entry from audit_control, an
extension to the Solaris file format to allow specification of policy
persistent flags.
- Update audump to print the audit_control policy field.
- Update auditd to read the audit_control policy field and set the kernel
policy to match it when configuring/reconfiguring. Remove the -s and -h
arguments as these policies are now set via the configuration file. If a
policy line is not found in the configuration file, continue with the
current default of setting AUDIT_CNT.
- Fix bugs in the parsing of large execve(2) arguments and environmental
variable tokens; increase maximum parsed argument and variable count.
- configure now detects strlcat(), used by policy-related functions.
- Reference token and record sample files added to test tree.
Obtained from: TrustedBSD Project
the build. The openbsm folks are free to fix it in any other way they
see fit once they resurface.
Basically, make everything always be const char **, even though const
char ** usually should be 'const char * const *' in most cases. This
makes the three different definitions consistant and allows world to
build.
notes since the last import:
OpenBSM 1.0 alpha 9
- Rename many OpenBSM-specific constants and API elements containing the
strings "BSM" and "bsm" to "AUDIT" and "audit", observing that this is true
for almost all existing constants and APIs.
- Instead of passing a per-instance cookie directly into all audit filter
APIs, pass in the audit filter daemon state pointer, which is then used by
the module using an audit_filter_{get,set}cookie() API. This will allow
future service APIs provided by the filter daemon to maintain their own
state -- for example, per-module preselection state.
OpenBSM 1.0 alpha 8
- Correct typo in definition of AUR_INT.
- Adopt OpenSolaris constant values for AUDIT_* configuration flags.
- Arguments to au_to_exec_args() and au_to_exec_env() no longer const.
- Add kernel versions of au_to_exec_args() and au_to_exec_env().
- Fix exec argument type that is printed for env strings from 'arg' to 'env'.
- New OpenBSM token version number assigned, constants added for other
commonly seen version numbers.
- OpenBSM-specific events assigned numbers in the 43xxx range to avoid future
collisions with Solaris. Darwin events renamed to AUE_DARWIN_foo, as they
are now deprecated numberings.
- autoconf now detects clock_gettime(), which is not available on Darwin.
- praudit output fixes relating to arg32 and arg64 tokens.
- Maximum record size updated to 64k-1 to match Solaris record size limit.
- Various style and comment cleanups in include files.
This is an MFC candidate to RELENG_6.
Obtained from: TrustedBSD Project
notes:
- Adopted Solaris-compatible format for subject32_ex and subject64_ex
tokens, which previously did not correctly implement variable length
address storage.
- Prefer inttypes.h to stdint.h; enhance queue.h detection to test for
TAILQ_FOREACH_SAFE(), which is present in recent BSD queue.h's, but not
older ones. OpenBSM now builds on some FreeBSD 4.x version.
- New event types for extended attributes, ACLs, and scheduling.
Obtained from: TrustedBSD Project
- Use AU_TO_WRITE and AU_NO_TO_WRITE for the 'keep' argument to au_close();
previously we used hard-coded 0 and 1 values.
- Add man page for au_open(), au_write(), au_close(), and
au_close_buffer().
- Support a more complete range of data types for the arbitrary data token:
add AUR_CHAR (alias to AUR_BYTE), remove AUR_LONG, add AUR_INT32 (alias
to AUR_INT), add AUR_INT64.
- Add au_close_token(), which allows writing a single token_t to a memory
buffer. Not likely to be used much by applications, but useful for
writing test tools.
- Modify au_to_file() so that it accepts a timeval in user space, not just
kernel -- this is not a Solaris BSM API so can be modified without
causing compatibility issues.
- Define a new API, au_to_header32_tm(), which adds a struct timeval
argument to the ordinary au_to_header32(), which is now implemented by
wrapping au_to_header32_tm() and calling gettimeofday(). #ifndef KERNEL
the APIs that invoke gettimeofday(), rather than having a variable
definition. Don't try to retrieve time zone information using
gettimeofday(), as it's not needed, and introduces possible failure
modes.
- Don't perform byte order transformations on the addr/machine fields of
the terminal ID that appears in the process32/subject32 tokens. These
are assumed to be IP addresses, and as such, to be in network byte
order.
- Universally, APIs now assume that IP addresses and ports are provided
in network byte order. APIs now generally provide these types in
network byte order when decoding.
- Beginnings of an OpenBSM test framework can now be found in openbsm/test.
This code is not built or installed by default.
- auditd now assigns more appropriate syslog levels to its debugging and
error information.
- Support for audit filters introduced: audit filters are dynamically
loaded shared objects that run in the context of a new daemon,
auditfilterd. The daemon reads from an audit pipe and feeds both BSM and
parsed versions of records to shared objects using a module API. This
will provide a framework for the writing of intrusion detection services.
- New utility API, audit_submit(), added to capture common elements of audit
record submission for many applications.
Obtained from: TrustedBSD Project
- Update install notes to indicate /etc files are to be installed manually.
- On systems without LOG_SECURITY, use LOG_AUTH.
- Convert to autoconf/automake in order to move to a more portable (not
BSD-specific) build infrastructure, and more easy conditional building of
components. Currently, the primary feature loss is that automake does
not have native support for manual symlinks. This will be addressed in a
future OpenBSM release.
- Add compat/queue.h, to be used on systems dated BSD queue macro libraries
(as found on Linux).
- Rename CHANGELOG to HISTORY, as our change log doesn't follow some of the
existing conventions for a CHANGELOG.
- Some private data structures moved from audit.h to audit_internal.h to
prevent inappropriate use by applications and name space pollution.
- Improved detection and use of endian macros using autoconf.
- Avoid non-portable use of struct in6_addr, which is largely opaque.
- Avoid leaking BSD kernel socket related token code to user space in
bsm_token.c.
- Teach System V IPC calls to look for Linux naming variations for certain
struct ipc_perm fields.
- Test for audit system calls, and if not present, don't build
bsm_wrappers.c, bsm_notify.c, audit(8), and auditd(8), which rely on
those system calls.
- au_close() is not implemented on systems that don't have audit system
calls, but au_close_buffer() is.
- Work around missing BSDisms in bsm_wrapper.c.
- Fix nested includes so including libbsm.h in an application on Linux
picks up the necessary definitions.
Obtained from: TrustedBSD Project
- Remove "audit" user example from audit_user, as it's not present on most
systems.
- Add cannot_audit() function non-Darwin systems that wraps auditon();
required by OpenSSH BSM support. Convert Darwin cannot_audit() into a
function rather than a macro.
- Library build fixed on Darwin following include file tweaks. The native
Darwin sys/audit.h conflicts with bsm/audit.h due to duplicate types, so
for now we force bsm_wrappers.c to not perform a nested include of
sys/audit.h.
Obtained from: TrustedBSD Project
- Man page formatting, cross reference, mlinks, and accuracy improvements.
- auditd and tools now compile and run on FreeBSD/arm.
- auditd will now fchown() the trail file to the audit review group, if
defined at compile-time.
- Added AUE_SYSARCH for FreeBSD.
- Definition of AUE_SETFSGID fixed for Linux.
Many thanks to: brueffer, cognet
Obtained from: TrustedBSD Project
1.0 alpha 1, an implementation of the documented Sun Basic Security
Module (BSM) Audit API and file format, as well as local extensions to
support the Mac OS X and FreeBSD operating systems. Also included are
command line tools for audit trail reduction and conversion to text,
as well as documentation of the commands, file format, and APIs. This
distribution is the foundation for the TrustedBSD Audit implementation,
and is a pre-release.
This is the first in a series of commits to introduce support for
Common Criteria CAPP security event audit support.
This software has been made possible through the generous
contributions of Apple Computer, Inc., SPARTA, Inc., as well as
members of the TrustedBSD Project, including Wayne Salamon <wsalamon>
and Tom Rhodes <trhodes>. The original OpenBSM implementation was
created by McAfee Research under contract to Apple Computer, Inc., as
part of their CC CAPP security evaluation.
Many thanks to: wsalamon, trhodes
Obtained from: TrustedBSD Project
