schedulers a bit to ensure more correct handling of priorities and fewer
priority inversions:
- Add two functions to the sched(9) API to handle priority lending:
sched_lend_prio() and sched_unlend_prio(). The turnstile code uses these
functions to ask the scheduler to lend a thread a set priority and to
tell the scheduler when it thinks it is ok for a thread to stop borrowing
priority. The unlend case is slightly complex in that the turnstile code
tells the scheduler what the minimum priority of the thread needs to be
to satisfy the requirements of any other threads blocked on locks owned
by the thread in question. The scheduler then decides where the thread
can go back to normal mode (if it's normal priority is high enough to
satisfy the pending lock requests) or it it should continue to use the
priority specified to the sched_unlend_prio() call. This involves adding
a new per-thread flag TDF_BORROWING that replaces the ULE-only kse flag
for priority elevation.
- Schedulers now refuse to lower the priority of a thread that is currently
borrowing another therad's priority.
- If a scheduler changes the priority of a thread that is currently sitting
on a turnstile, it will call a new function turnstile_adjust() to inform
the turnstile code of the change. This function resorts the thread on
the priority list of the turnstile if needed, and if the thread ends up
at the head of the list (due to having the highest priority) and its
priority was raised, then it will propagate that new priority to the
owner of the lock it is blocked on.
Some additional fixes specific to the 4BSD scheduler include:
- Common code for updating the priority of a thread when the user priority
of its associated kse group has been consolidated in a new static
function resetpriority_thread(). One change to this function is that
it will now only adjust the priority of a thread if it already has a
time sharing priority, thus preserving any boosts from a tsleep() until
the thread returns to userland. Also, resetpriority() no longer calls
maybe_resched() on each thread in the group. Instead, the code calling
resetpriority() is responsible for calling resetpriority_thread() on
any threads that need to be updated.
- schedcpu() now uses resetpriority_thread() instead of just calling
sched_prio() directly after it updates a kse group's user priority.
- sched_clock() now uses resetpriority_thread() rather than writing
directly to td_priority.
- sched_nice() now updates all the priorities of the threads after the
group priority has been adjusted.
Discussed with: bde
Reviewed by: ups, jeffr
Tested on: 4bsd, ule
Tested on: i386, alpha, sparc64
- Remove the sched_add wrapper that used sched_add_internal() as a backend.
Its only purpose was to interpret one flag and turn it into an int. Do
the right thing and interpret the flag in sched_add() instead.
- Pass the flag argument to sched_add() to kseq_runq_add() so that we can
get the SRQ_PREEMPT optimization too.
- Add a KEF_INTERNAL flag. If KEF_INTERNAL is set we don't adjust the SLOT
counts, otherwise the slot counts are adjusted as soon as we enter
sched_add() or sched_rem() rather than when the thread is actually placed
on the run queue. This greatly simplifies the handling of slots.
- Remove the explicit prevention of migration for ithreads on non-x86
platforms. This was never shown to have any real benefit.
- Remove the unused class argument to KSE_CAN_MIGRATE().
- Add ktr points for thread migration events.
- Fix a long standing bug on platforms which don't initialize the cpu
topology. The ksg_maxid variable was never correctly set on these
platforms which caused the long term load balancer to never inspect
more than the first group or processor.
- Fix another bug which prevented the long term load balancer from working
properly. If stathz != hz we can't expect sched_clock() to be called
on the exact tick count that we're anticipating.
- Rearrange sched_switch() a bit to reduce indentation levels.
nice of 0. Doing so can cause an infinite loop because they should be
running, but a nice -20 process could prevent them from doing so.
- Add a new flag KEF_PRIOELEV to flag a thread that has had its priority
elevated due to priority propagation. If a thread has had its priority
elevated, we assume that it must go on the current queue and it must
get a slice.
- In sched_userret() if our priority was elevated and we shouldn't have
a timeslice, yield here until we should.
Found/Tested by: glebius
outside of the nice threshold due to a recently awoken thread with a
lower nice value. This further reduces the amount of time a positively
niced thread gets while running in conjunction with a workload that has
many short sleeps (ie buildworld).
check for TD_ON_RUNQ() no longer means the thread is really on a run-
queue. I suspect this state should be re-evaluated as it must mean
something else now. This fixes ULE+KSE+PREEMPTION on UP x86.
fully initialed when the pmap layer tries to call sched_pini() early in the
boot and results in an quick panic. Use ke_pinned instead as was originally
done with Tor's patch.
Approved by: julian
scheduler specific extension to it. Put it in the extension as
the implimentation details of how the pinning is done needn't be visible
outside the scheduler.
Submitted by: tegge (of course!) (with changes)
MFC after: 3 days
but with slightly cleaned up interfaces.
The KSE structure has become the same as the "per thread scheduler
private data" structure. In order to not make the diffs too great
one is #defined as the other at this time.
The KSE (or td_sched) structure is now allocated per thread and has no
allocation code of its own.
Concurrency for a KSEGRP is now kept track of via a simple pair of counters
rather than using KSE structures as tokens.
Since the KSE structure is different in each scheduler, kern_switch.c
is now included at the end of each scheduler. Nothing outside the
scheduler knows the contents of the KSE (aka td_sched) structure.
The fields in the ksegrp structure that are to do with the scheduler's
queueing mechanisms are now moved to the kg_sched structure.
(per ksegrp scheduler private data structure). In other words how the
scheduler queues and keeps track of threads is no-one's business except
the scheduler's. This should allow people to write experimental
schedulers with completely different internal structuring.
A scheduler call sched_set_concurrency(kg, N) has been added that
notifies teh scheduler that no more than N threads from that ksegrp
should be allowed to be on concurrently scheduled. This is also
used to enforce 'fainess' at this time so that a ksegrp with
10000 threads can not swamp a the run queue and force out a process
with 1 thread, since the current code will not set the concurrency above
NCPU, and both schedulers will not allow more than that many
onto the system run queue at a time. Each scheduler should eventualy develop
their own methods to do this now that they are effectively separated.
Rejig libthr's kernel interface to follow the same code paths as
linkse for scope system threads. This has slightly hurt libthr's performance
but I will work to recover as much of it as I can.
Thread exit code has been cleaned up greatly.
exit and exec code now transitions a process back to
'standard non-threaded mode' before taking the next step.
Reviewed by: scottl, peter
MFC after: 1 week
FULL_PREEMPTION is defined. Add a runtime warning to ULE if PREEMPTION is
enabled (code inspired by the PREEMPTION warning in kern_switch.c). This
is a possible MT5 candidate.
preemption and/or the rev 1.79 kern_switch.c change that was backed out.
The thread was being assigned to a runq without adding in the load, which
would cause the counter to hit -1.
migration. Use this in sched_prio() and sched_switch() to stop us from
migrating threads that are in short term sleeps or are runnable. These
extra migrations were added in the patches to support KSE.
- Only set NEEDRESCHED if the thread we're adding in sched_add() is a
lower priority and is being placed on the current queue.
- Fix some minor whitespace problems.
contributed to the transferable load count. This prevents any potential
problems with sched_pin() being used around calls to setrunqueue().
- Change the sched_add() load balancing algorithm to try to migrate on
wakeup. This attempts to place threads that communicate with each other
on the same CPU.
- Don't clear the idle counts in kseq_transfer(), let the cpus do that when
they call sched_add() from kseq_assign().
- Correct a few out of date comments.
- Make sure the ke_cpu field is correct when we preempt.
- Call kseq_assign() from sched_clock() to catch any assignments that were
done without IPI. Presently all assignments are done with an IPI, but I'm
trying a patch that limits that.
- Don't migrate a thread if it is still runnable in sched_add(). Previously,
this could only happen for KSE threads, but due to changes to
sched_switch() all threads went through this path.
- Remove some code that was added with preemption but is not necessary.
specify "us" as the thread not the process/ksegrp/kse.
You can always find the others from the thread but the converse is not true.
Theorotically this would lead to runtime being allocated to the wrong
entity in some cases though it is not clear how often this actually happenned.
(would only affect threaded processes and would probably be pretty benign,
but it WAS a bug..)
Reviewed by: peter
since they are only accessed by curthread and thus do not need any
locking.
- Move pr_addr and pr_ticks out of struct uprof (which is per-process)
and directly into struct thread as td_profil_addr and td_profil_ticks
as these variables are really per-thread. (They are used to defer an
addupc_intr() that was too "hard" until ast()).
takes an argument to specify if it should preempt or not. Don't preempt
when sched_add_internal() is called from kseq_idled() or kseq_assign()
as in those cases we are about to call mi_switch() anyways. Also, doing
so during the first context switch on an AP leads to a NULL pointer deref
because curthread is NULL.
- Reenable preemption for ULE.
Submitted by: Taku YAMAMOTO taku at tackymt.homeip.net
hangs due to recent preemption changes. This change appears to remove
the panic that I was running into, but at the cost of increasing
ithread scheduling latency, and as such is a temporary band-aid until
jhb has a chance to resolve the ule<->preemption interaction that is
the source of the problem. If it doesn't fix the problem for others--
sorry!
introduced a KSE_CAN_MIGRATE() invocation with one argument
missing (class). Either this is a genuine forget or it crept
in from JHB's repo where he may have modified it. If it's
the latter then it may require more attention. For now fix
the make depend.
than as one-off hacks in various other parts of the kernel:
- Add a function maybe_preempt() that is called from sched_add() to
determine if a thread about to be added to a run queue should be
preempted to directly. If it is not safe to preempt or if the new
thread does not have a high enough priority, then the function returns
false and sched_add() adds the thread to the run queue. If the thread
should be preempted to but the current thread is in a nested critical
section, then the flag TDF_OWEPREEMPT is set and the thread is added
to the run queue. Otherwise, mi_switch() is called immediately and the
thread is never added to the run queue since it is switch to directly.
When exiting an outermost critical section, if TDF_OWEPREEMPT is set,
then clear it and call mi_switch() to perform the deferred preemption.
- Remove explicit preemption from ithread_schedule() as calling
setrunqueue() now does all the correct work. This also removes the
do_switch argument from ithread_schedule().
- Do not use the manual preemption code in mtx_unlock if the architecture
supports native preemption.
- Don't call mi_switch() in a loop during shutdown to give ithreads a
chance to run if the architecture supports native preemption since
the ithreads will just preempt DELAY().
- Don't call mi_switch() from the page zeroing idle thread for
architectures that support native preemption as it is unnecessary.
- Native preemption is enabled on the same archs that supported ithread
preemption, namely alpha, i386, and amd64.
This change should largely be a NOP for the default case as committed
except that we will do fewer context switches in a few cases and will
avoid the run queues completely when preempting.
Approved by: scottl (with his re@ hat)
switch to. If a non-NULL thread pointer is passed in, then the CPU will
switch to that thread directly rather than calling choosethread() to pick
a thread to choose to.
- Make sched_switch() aware of idle threads and know to do
TD_SET_CAN_RUN() instead of sticking them on the run queue rather than
requiring all callers of mi_switch() to know to do this if they can be
called from an idlethread.
- Move constants for arguments to mi_switch() and thread_single() out of
the middle of the function prototypes and up above into their own
section.
sched_clock() rather than using callouts. This means we no longer have to
take the load of the callout thread into consideration while balancing and
should make the balancing decisions simpler and more accurate.
Tested on: x86/UP, amd64/SMP
sched_ule, in January 2004. Looking at this, "pagezero" is (one of) the
culprit(s). We had no provision for processes with P_NOLOAD set. With
pagezero not running at PRI_ITHD, kseq_load_{add,rem} count pagezero as
another-normal-process, thus the "expected-plus-one" load reported in
the above thread.
Submitted by: Nikos Ntarmos <ntarmos@ceid.upatras.gr>
SCHED_INTERACT_MAX was used where SCHED_SLP_RUN_MAX was needed. This was
causing the interactivity scaler to lose history at a more dramatic rate
than intended.
long as there are still explicit uses of int, whether in types or
in function names (such as atomic_set_int() in sched_ule.c), we can
not change cpumask_t to be anything other than u_int. See also the
commit log for sys/sys/types.h, revision 1.84.
activation (i.e., applications are using libpthread). This is because
SCHED_ULE sometimes puts P_SA processes into ksq_next unnecessarily.
Which doesn't give fair amount of CPU time to processes which are
using scheduler-activation-based threads when other (semi-)CPU-intensive,
non-P_SA processes are running.
Further work will no doubt be done by jeffr at a later date.
Submitted by: Taku YAMAMOTO <taku@cent.saitama-u.ac.jp>
Reviewed by: rwatson, freebsd-current@
sleep queue interface:
- Sleep queues attempt to merge some of the benefits of both sleep queues
and condition variables. Having sleep qeueus in a hash table avoids
having to allocate a queue head for each wait channel. Thus, struct cv
has shrunk down to just a single char * pointer now. However, the
hash table does not hold threads directly, but queue heads. This means
that once you have located a queue in the hash bucket, you no longer have
to walk the rest of the hash chain looking for threads. Instead, you have
a list of all the threads sleeping on that wait channel.
- Outside of the sleepq code and the sleep/cv code the kernel no longer
differentiates between cv's and sleep/wakeup. For example, calls to
abortsleep() and cv_abort() are replaced with a call to sleepq_abort().
Thus, the TDF_CVWAITQ flag is removed. Also, calls to unsleep() and
cv_waitq_remove() have been replaced with calls to sleepq_remove().
- The sched_sleep() function no longer accepts a priority argument as
sleep's no longer inherently bump the priority. Instead, this is soley
a propery of msleep() which explicitly calls sched_prio() before
blocking.
- The TDF_ONSLEEPQ flag has been dropped as it was never used. The
associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been
dropped and replaced with a single explicit clearing of td_wchan.
TD_SET_ONSLEEPQ() would really have only made sense if it had taken
the wait channel and message as arguments anyway. Now that that only
happens in one place, a macro would be overkill.
