- Use an interrupt filter for handling the data path interrupts. This
increases the throughput significantly.
- Implement support for USB suspend and resume in USB host mode.
Sponsored by: DARPA, AFRL
they then pick up an opt_global.h from KERNBUILDDIR having PAE defined.
Thus, build all modules by default except those which still really are
defective as of r266799.
- Minor style cleanup.
MFC after: 1 week
flags that has several bits cleared. The RF_WANTED and RF_FIRSTSHARE
bits are invalid in this context, and we want to defer setting RF_ACTIVE
in r_flags until later. This should make rman_get_flags() return
the correct answer in all cases.
Add a KASSERT() to catch callers which incorrectly pass the RF_WANTED
or RF_FIRSTSHARE flags.
Do a strict equality check on the share type bits of flags. In
particular, do an equality check on RF_PREFETCHABLE. The previous
code would allow one type of mismatch of RF_PREFETCHABLE but disallow
the other type of mismatch. Also, ignore the the RF_ALIGNMENT_MASK
bits since alignment validity should be handled by the amask check.
This field contains an integer value, but previous code did a strange
bitwise comparison on it.
Leave the original value of flags unmolested as a minor debug aid.
Change the start+amask overflow check to a KASSERT() since it is just
meant to catch a highly unlikely programming error in the caller.
Reviewed by: jhb
MFC after: 1 month
- Make the USB hardware skip PTDs which are not allocated.
- Peek host memory twice. Sometimes the PTD status is incorrectly
returned as zero.
- Ensure the host channel is always freed when software TD
is completing.
- Add correct configuration of interrupt polarity and type.
- Set CERR to 2 for asynchronous traffic to avoid having to
reactivate the PTD when a NAK token is received.
- Fix detection of STALL PID.
Sponsored by: DARPA, AFRL
For IPv6-in-IPv4, you may need to do the following command
on the tunnel interface if it is configured as IPv4 only:
ifconfig <interface> inet6 -ifdisabled
Code logic inspired from NetBSD.
PR: kern/169438
Submitted by: emeric.poupon@netasq.com
Reviewed by: fabient, ae
Obtained from: NETASQ
physical addresses.
- Nuke the unused softc of emujoy(4).
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
- Based on actual usage and on what Linux does, dummy_page.addr should
contain the physical bus address of the dummy page rather than its
virtual one. As a side-effect, correcting this bug fixes compilation
with PAE support enabled by getting rid of an inappropriate cast.
- Also based on actual usage of dummy_page.addr, theoretically Radeon
devices could do a maximum of 44-bit DMA. In reality, though, it is
more likely that they only support 32-bit DMA, at least that is what
radeon_gart_table_ram_alloc() sets up for, too. However, passing ~0
to drm_pci_alloc() as maxaddr parameter translates to 64-bit DMA on
amd64/64-bit machines. Thus, use BUS_SPACE_MAXSIZE_32BIT instead,
which the existing 32-bit DMA limits within the drm2 code spelled as
0xFFFFFFFF should also be changed to.
Reviewed by: dumbbell
MFC after: 1 week
Sponsored by: Bally Wulff Games & Entertainment GmbH
Some Linux futex ops atomically verifies that the futex address uaddr
(uval) contains the value val. Comparing signed uval and unsigned val
may lead to an unexpected result, mostly to a deadlock.
So copyin uaddr to an unsigned int to compare the parameters correctly.
While here change ktr records to print parameters in more readable format.
Tested by eadler@
MFC after: 3 days
situation checked by assert is verified to not take place in
vm_map_wire(), and protection permissions on the wired entry can be
revoked afterward.
Reported by: markj
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
was not allocating space for the parameter save area in the stack frame.
If the compiler chose to save the argument to the signal handler on the
stack, it would overwrite the first 32 bits of the sigaction struct with
it, corrupting it for a subsequent invocation.
PR: powerpc/183040
MFC after: 8 days
BUS_DMA_KMEM_ALLOC. They serve the same purpose, but using the flag
means that the map can be NULL again, which in turn enables significant
optimizations for the common case of no bouncing.
Obtained from: Netflix, Inc.
MFC after: 3 days
- Switch from timeout() to callout_*() for per-request timers.
- Use device_find_child() in the identify routine.
- Use device_printf() instead of passing device_get_nameunit() to
printf().
- Expand the SBP_LOCK coverage simplifying the locking.
- Uninline STAILQ_FOREACH_SAFE().
Tested by: sbruno
Add a new zfs property, "redundant_metadata" which can have values "all" or
"most". The default will be "all", which is the current behavior. When set
to all, ZFS stores an extra copy of all metadata. If a single on-disk block
is corrupt, at worst a single block of user data (which is recordsize bytes
long) can be lost.
Setting to "most" will cause us to only store 1 copy of level-1 indirect
blocks of user data files. This can improve performance of random writes,
because less metadata has to be written. In practice, at worst about
100 blocks (of recordsize bytes each) of user data can be lost if a single
on-disk block is corrupt.
The exact behavior of which metadata blocks are stored redundantly may change
in future releases.
Illumos issue: 3835 zfs need not store 2 copies of all metadata
MFC after: 2 weeks
guest for which the rules regarding xsetbv emulation are known. In
particular future extensions like AVX-512 have interdependencies among
feature bits that could allow a guest to trigger a GP# in the host with
the current approach of allowing anything the host supports.
- Add proper checking of Intel MPX and AVX-512 XSAVE features in the
xsetbv emulation and allow these features to be exposed to the guest if
they are enabled in the host.
- Expose a subset of known-safe features from leaf 0 of the structured
extended features to guests if they are supported on the host including
RDFSBASE/RDGSBASE, BMI1/2, AVX2, AVX-512, HLE, ERMS, and RTM. Aside
from AVX-512, these features are all new instructions available for use
in ring 3 with no additional hypervisor changes needed.
Reviewed by: neel
Netmap gets its own hardware-assisted virtual interface and won't take
over or disrupt the "normal" interface in any way. You can use both
simultaneously.
For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface
(note the 'n' prefix) in the hardware to accompany each cxl<N>
interface. These two ifnet's per port share the same wire but really
are separate interfaces in the hardware and software. Each gets its own
L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You
should run netmap on the 'n' interfaces only, that's what they are for.
With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port
of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now.
Single port receive is at 33Mpps but this is very much a work in
progress. I expect it to be closer to 40Mpps once done. In any case
the current effort can already saturate multiple 10G ports of a T5 card
at the smallest legal packet size. T4 gear is totally untested.
trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43🆎cd:ef
881.952141 main [1621] interface is ncxl0
881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0
881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0
881.962540 main [1804] mapped 334980KB at 0x801dff000
Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus.
10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43🆎cd:ef)
881.962562 main [1882] Sending 512 packets every 0.000000000 s
881.962563 main [1884] Wait 2 secs for phy reset
884.088516 main [1886] Ready...
884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1
884.088607 sender_body [996] start
884.093246 sender_body [1064] drop copy
885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec)
886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec)
887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec)
888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec)
889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec)
890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec)
891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec)
892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec)
893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec)
894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec)
895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec)
896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec)
...
Relnotes: Yes
Sponsored by: Chelsio Communications.
uart2: <Intel AMT - PM965/GM965 KT Controller> port 0x1830-0x1837
mem 0xfe024000-0xfe024fff irq 17 at device 3.3 on pci0
uart2: console (115200,n,8,1)
Tested as tty and serial console. Seems "fine"
