Commit Graph

394 Commits

Author SHA1 Message Date
gjb
d19e8d9a37 Replace 'chflags' with 'file flags' in a comment, since 'chflags'
is a command, not a flag itself.

While here, wrap a line for readability.

Submitted by:		arundel
MFC after:		3 days
X-MFC-With:		227769, 227770
2011-11-20 20:05:47 +00:00
gjb
4cbcc15d99 Fix the note in r227769 to be less specific to the immutable flag.
Submitted by:		arundel
MFC after:		3 days
X-MFC-With:		r227769
2011-11-20 19:27:52 +00:00
gjb
46ca9e75dd Add a note to src/Makefile that explains that 'rm' runs twice because the
second invocation only needs to operate on files with the immutable flag
set.

Submitted by:		arundel (via private email) (original version)
Discussed on:		-toolchain@
MFC after:		3 days
2011-11-20 19:05:32 +00:00
ru
3fa3d79859 It's a bit odd, but "make update" in src/ can also update the ports/,
doc/, and now www/ trees, but only using the "cvsup" transport.

When "make update" is run using a tree's makefile, it can also use
"cvs" (except for www/) and "svn" (only src/).

Clean up documentation and code regarding "make update":

- Increase oddness by adding support for WWWSUPFILE and NO_WWWUPDATE to
  Makefile.inc1 (analogous to PORTSSUPFILE/NO_PORTSUPDATE and
  DOCSUPFILE/NO_DOCUPDATE; WWWSUPFILE already supported by www/Makefile).

- Document all trees that support CVS_UPDATE.

- Document all trees that support SUP_UPDATE.

- Document SVN_UPDATE.

- Document NO_WWWUPDATE.

- make.conf(5) mistakenly said that *SUPFILE* had defaults.

- Add an example entry for WWWSUPFILE.
2011-06-16 12:28:37 +00:00
attilio
96139278ce Disconnect sun4v architecture from the three.
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.

Reviewed by:	marius
Tested by:	sbruno
Approved by:	re
2011-05-14 01:53:38 +00:00
jhb
67e72142a1 Add the mipsn32eb TARGET_ARCH to the list of mips targets for the
XLRN32 kernel config.

Reviewed by:	imp, jmallet
2011-04-29 18:27:50 +00:00
bz
d47989ee77 If building (custom) FreeBSD images people tend to patch param.h. In case
this happens just before the build is started (within the same second)
CHECK_TIME actually triggers thinking param.h is in the future (see f_Xtime,
c_Xtime logi in find(1) sources for the details in !F_EXACTTIME case).
Using the -mtime -0s (seconds, rather than no unit) avoids this 1s race.

Submitted by:	ed (2009-05-03)
Reviewed by:	cperciva (2009-05-03), emaste
Tested by:	bz (for almost two years)
MFC after:	4 days
2011-04-12 02:07:23 +00:00
dougb
f272389b99 Update recommendation for mergemaster. The -a and -i options are exclusive.
PR:		docs/156271
Submitted by:	Fedor Dikarev <fedor.dikarev@gmail.com>
2011-04-10 03:53:06 +00:00
nwhitehorn
a8c9f18299 Improve the distributeworld target in Makefile.inc1 and update the release
infrastructure to use it. make distributeworld can now be used without
preparing its environment first and installs games into its distribution
using the regular make distribute logic instead of post-processing with
a script.

Also add two new targets, packageworld and packagekernel, that tar up the
results of distributeworld and distributekernel (also new), respectively.
2011-03-02 14:39:26 +00:00
jhb
e8017b8cea Fully honor KERNSRCDIR for 'make universe' if it is set.
MFC after:	1 week
2011-03-01 14:54:14 +00:00
jhb
5316147f1e - Add a new UNIVERSE_TARGET variable for 'make universe'. If it is set,
then that target is invoked for each architecture rather than the
  default action of building world and kernels for each architecture.
- Add a 'make toolchains' wrapper which uses UNIVERSE_TARGET to build
  toolchains for all architectures.
- Document JFLAG, MAKE_JUST_KERNELS, and MAKE_JUST_WORLDS variables for
  'make universe'.

Reviewed by:	bz
MFC after:	1 week
2011-02-10 18:54:52 +00:00
imp
c70bfd860a Setting TARGET and TARGET_ARCH needs to be done in _MAKE, not in the
TGTS rule as _MAKE is used elsewhere.  This should fix make world.
2011-02-02 23:59:24 +00:00
imp
2131e19013 Move the architecture guessing from Makefile.inc1 to Makefile. We
need to do this because variables specified on the command line
override those specified in the Makefile.  This is why we also moved
from TARGET to _TARGET in Makefile, and then set TARGET on the command
line when we fork a submake with Makefile.inc1.

This makes mips/mips work again, even without the workaround committed to
lib/libc/Makefile.
2011-01-31 15:17:47 +00:00
bz
ab3c671599 Back out r217734. [1]
Properly document what `make targets` is supposed to list to avoid
further confusion given the place the target sits. Should have happened
with r217125.

Requested by:	imp [1]
Reviewed by:	rwatson
2011-01-25 08:13:31 +00:00
bz
4bf4793433 For make tinderbox there is no need to print the extra commands.
MFC after:	5 days
2011-01-23 16:28:44 +00:00
bz
9eac5e09d6 Make make tinderbox work with MAKEOBJDIRPREFIX set (or in possibly other
combinations) by forcing FAILFILE into .CURDIR as we do for all other
universe output files. [1]  Similarly make FAILFILE start with "_." as well.

Reviewed by:	silence-on-src [1]
MFC after:	6 days
2011-01-22 23:16:44 +00:00
bz
199e86369e In make targets print the make variable TARGETS as we expect it rather
than the grammatically better sounding variant without the 'S'.  This
allows copy and paste and is less confusing.
2011-01-22 23:10:58 +00:00
bz
c94366e913 Properly document what the top-level make tinderbox does.
Reviewed by:	jmallett
MFC After:	3 days
X-MFC:		build.7 only
2011-01-22 22:57:28 +00:00
imp
61101fdbf7 Provide up-to-date estimates that are pessimal today... 2011-01-12 04:59:29 +00:00
imp
c2d8b7c75a Proving once again, I can't typo: fix a type. 2011-01-11 22:57:41 +00:00
imp
25020faf2e Minor improvements in the wording of a comment. Document tinderbox target. 2011-01-11 18:32:05 +00:00
imp
ec8aab4b2d make targets
This produces a list of currently supported targets.  Here "supported"
means "built in make universe" on the theory that those targets are
more supported than any that might work in 'make buildworld TARGET=x
TARGET_ARCH=y' since the latter are less tested.

Suggested by: rwatson
2011-01-07 20:36:27 +00:00
imp
54d5c7e86f Retire TARGET_ABI.
Implement MACHINE_ARCH=mips64e[lb] to build N64 images.  This replaces
MACHINE_ARCH=mipse[lb] TARGET_ABI=n64.

MACHINE_ARCH=mipsn32e[lb] has been added, but currently requires
WITHOUT_CDDL due to atomic issues in libzfs.  I've not investigated
this much, but implemented this to preserve as much of the TARGET_ABI
functionality that I could.  Since its presence doesn't affect the
working cases, I've kept it in for now.

Added mips64e[lb] to make universe, so more kernels build.

And I think this (finally) closes the curtain on the tbemd tree.
2011-01-07 20:26:33 +00:00
imp
192742df1e When TARGET_ARCH_${kernel} gets set, it is using the host's config,
not the one we build as part of make world.  This means that make
universe will fail if building on a too-old current or any stable
system prior to a few days ago in weird ways (parse errors from
shell).  This copes with these old systems in two ways:

(1) Works around the WARNING: issue by filtering all warnings that
    sneak onto stdout.

(2) if TARGET_ARCH_${kernel} winds up being empty, then we error out
    immediately with a semi-useful error message.  This usually comes from
    config not groking -m.

Ideally, we'd use a buildworld's config here, but that's tricky, so
I'll leave that detail to others to fix (it has to be done post make
world for the arch rather than at the top level makefile).  This
should make 'make universe' usable from recent 8-stable systems
(recent == last few months or so) for building -current.  They have
-m, but spewed warnings out stdout.  Older systems will now at least
get a firm error early rather than a confusing error late.
2011-01-03 22:48:01 +00:00
imp
c5439e9661 Redirect stderr from config to /dev/null. config -m is printing lots
of annoying warnings when dealing with arm.  The arm config files need
to be fixed, but this restricts the output to a more useful place.
2010-12-24 04:55:56 +00:00
nwhitehorn
58baed5a57 Reconnect arm to the universe build, and connect big-endian MIPS and ARM
and powerpc64 to universe for the first time. In general, provide
(slightly hacky) knowledge of multi-architecture TARGETs to universe as
well as the ability to distinguish the correct toolchain for a given
kernel using config -m.
2010-12-18 14:34:05 +00:00
jhb
4e3d1cfc31 Pass JFLAG as JFLAG from tinderbox to universe. This gives the same
semantics for JFLAG with tinderbox as for universe.  Previously doing
'make JFLAG=-j4 tinderbox' was equivalent to 'make -j4 universe'
(i.e. 4 worlds in parallel) rather than 'make JFLAG=-j4 universe'
(i.e. worlds in sequence, each built with -j4).

MFC after:	1 month
2010-12-16 15:27:13 +00:00
imp
554a219f6e Add mips back to universe 2010-11-13 22:38:33 +00:00
imp
c178b8695e Complete the integration of tbemd branch into head.
TARGET_BIG_ENDIAN is now completely dead, except where it was
originally supposed to be used (internally in the toolchain building).

TARGET_ARCH has changed in three cases:
(1) Little endian mips has changed to mipsel.
(2) Big endian mips has changed to mipseb.
(3) Big endian arm has changed to armeb.

Some additional changes are needed to make 'make universe' work on arm
and mips after this change, so those are commented out for now.

UPDATING information will be forthcoming.  Any remaining rough edges
will be hammered out in -current.
2010-11-10 06:39:49 +00:00
raj
ce1aea1edb Connect FDT infrastructure to the build system.
Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-06-13 13:02:43 +00:00
dougb
69fc195c59 For those of us mere mortals who do not aspire to the lofty heights
of kernel hackery, add MAKE_JUST_WORLDS so that we can take part in
the 'make universe' goodnes without using unecessary time and resources.
2010-03-18 18:58:17 +00:00
imp
88d5aa8df2 Give make kernel-toolchain a one-liner here. Although documented in
build(7), many people look here for a quick reminder...
2010-03-03 21:08:44 +00:00
ed
0e18e3f232 Back out the change to Makefile made in r202628.
It was just a local modification to build the i386 and amd64 more
quickly.
2010-01-19 15:34:16 +00:00
ed
ec8fd67a3e Recommit r193732:
Remove __gnu89_inline.

  Now that we use C99 almost everywhere, just use C99-style in the pmap
  code. Since the pmap code is the only consumer of __gnu89_inline, remove
  it from cdefs.h as well. Because the flag was only introduced 17 months
  ago, I don't expect any problems.

  Reviewed by:    alc

It was backed out, because it prevented us from building kernels using a
7.x compiler. Now that most people use 8.x, there is nothing that holds
us back. Even if people run 7.x, they should be able to build a kernel
if they run `make kernel-toolchain' or `make buildworld' first.
2010-01-19 15:31:18 +00:00
bz
5467bb4869 Rather than using an extra variable, only call uname if really needed and
then directly assign the result.

Submitted by:	jmallett
MFC after:	24 days
X-MFC with:	r201815
2010-01-11 17:58:15 +00:00
bz
ee1cddf922 Use uname -m [1] and rename BUILD_ARCH to XMACHINE[2].
Submitted by:	nyan[1], imp[2]
MFC after:	27 days
X-MFC with:	r201815
2010-01-09 23:37:29 +00:00
bz
1af59610c9 To avoid hardcoding further kernel configuration names for
make universe, split the logic into two parts:
- 1st to build worlds and generate kernel configs like LINT.
- 2nd to build kernels for a given TARGET architecture correctly
  finding all newly generated configs, not knowing anything about
  LINT anymore. (*)

(*) If you know better/cleaner/... ways to do this, let me know.

Discussed on/with:	arch, jhb, rwatson
MFC after:		1 month
2010-01-08 19:01:50 +00:00
bz
0a11466281 Add a new world named 'mips' to our universe.
Discussed with:		imp
2009-04-01 17:11:50 +00:00
imp
6270d8e9fe Implement the xdev target. When you define XDEV=arch XDEV_ARCH=arch,
you can build the cross development tools and install them as
$XDEV-freebsd-xxx for each tool.  This allows one to use autoconf to
find the tools for cross building scenarios.
2009-03-13 07:23:58 +00:00
bz
455856ff06 Permit digits at the beginning and end of kernel config file names for
`make universe'. This catches a few more arm and, once enabled, mips
configs and permits having local configs named like NOINET6.

Reviewed by:	phk
MFC after:	4 weeks
2008-12-27 15:07:51 +00:00
alfred
4081b776af Provide a 'tinderbox' target that compiles enough of FreeBSD that
a developer can rest reasonably assured that the tinderbox will not
be broken.  This target leverages most of 'universe' but will exit
non-zero and output a summary at the end.

"make tinderbox"
2008-12-01 00:45:51 +00:00
des
315e1d3a3c Change the universe target to warn the user for every world or kernel that
fails.  The error message includes a reference to the relevant log file.

Approved by:	phk
MFC after:	1 week
2008-11-24 11:23:14 +00:00
bz
a786ca56c9 Back out rev. 1.352 (SVN rev 179842) as phk pointed out that
SRCCONF was omitted here to be able to build non standard trees
with universe as well.
2008-06-17 11:08:49 +00:00
bz
e772b82d0b For make universe, in addition to make.conf, also ignore a
src.conf with possibe non-default options.

Reviewed by:	ru
MFC after:	10 days
2008-06-17 09:06:46 +00:00
jb
e75a451fc0 Backout the change to remove sun4v.
Note that sun4v is currently broken on T2000 hardware so it's pretty
much a lame duck at this point.
2008-05-25 22:13:17 +00:00
jb
8ea302a3db Remove sun4v from the list of arches in 'make universe'. There has been
no active development on it for over a year now and it isn't
reliable under a simple buildworld. Developers can't be expected to
test code targeted for it.
2008-05-25 02:48:57 +00:00
jb
e78530f9ea Add a knob to allow just the kernels to be built during a 'make universe'.
This is useful when wanting to retry a broken build using NOCLEAN and the
buildworlds are known to have completed.
2008-05-23 04:20:59 +00:00
rwatson
b02f65b649 Mention -U and -ai arguments to mergemaster in a comment for the
general mergemaster line.

MFC after:	3 days
Suggested by:	Ben Laurie
2008-04-29 09:08:33 +00:00
pav
2b290549e3 Double up the necessary size of /usr/obj to 800MB
PR:		misc/99735
Reported by:	Philip M. Gollucci <pgollucci@p6m7g8.com>,
		Maxim Konovalov <maxim@macomnet.ru>
2008-03-31 13:32:55 +00:00
ru
771a69438e Add code that should catch the most common case when date/time is
set incorrectly.
2008-03-25 15:47:22 +00:00