redundant initializations.
Hard-code base = 0, height = (approx. 1/8 of the boot-time font height)
in all cases, and remove the BIOS/MD support for setting these values.
This asks for an underline cursor sized for the boot-time font instead
of various less hard-coded but worse values. I used that think that
the x86 BIOS always gave the same values as the above hard-coding, but
on 1 of my systems it gives the wrong value of base = 1.
The remaining BIOS fields are shift_state and bell_pitch. These are now
consistently not explicitly reinitialized to 0. All sc_get_bios_value()
functions except x86's are now empty, and the only useful thing that x86
returns is shift_state. This really belongs in atkbdc, but heavier
use of the BIOS to read the more useful typematic rate has been removed
there. fb still makes much heavier use of the BIOS.
Using latest U-Boot for RPI 1 or 2 the DTB loaded by the firmware is discarded.
The DTB was previously patched by the firmware to contain the DMA channel mask.
DTB provided by the rpi firmware or DTS in the Linux tree contain the raw value
directly. Do the same for our DTS as we cannot switch to the upstream ones yet.
Not having the DMA channel mask setup properly cause mmc not to be detected
(and probably other problems on driver using DMA).
Also, add links for rpi dtb to the name used by u-boot. This way the dtb can be
loaded by ubldr using the U-Boot env variable fdtfile.
Tested On: RPI B Rev2, RPI Zero, RPI 2 v1.1 RPI 2 v1.2
Thanks to Sylvain Garrigues <sylvain@sylvaingarrigues.com> for the help.
PR: 218344
and repurposing "blink". Improve accuracy of documentation of historical
mistakes and other bugs.
"blink" now means "set the blink attribute for the target(s)" instead of
"set the blink attribute and clear other attributes [and control flags]".
It was even more confusing to use "blinking" for the single attribute to
keep the old meaning for "blink".
"destructive" is not as historically broken or gone as the previous version
said.
The bugs involving resetting from defaults are now understood and partly
documented (the defaults are mis-initialized).
Previouly it was possible to create users with spaces in the name with:
pw useradd -u 1234 -g 1234 -n 'test user'
The "-g 1234" is relevant, without it the name was already rejected
as expected:
[fk@test ~]$ sudo pw useradd -u 1234 -n 'test user'
pw: invalid character ` ' at position 4 in userid/group name
Bug unintentionally found with a salt config without explicit name entry:
test user:
user.present:
- uid: 1234
- gid: 1234
- fullname: Test user
- shell: /usr/local/bin/bash
- home: /home/test
- groups:
- wheel
- salt
"Luckily" salt modules rarely bother with input validation either ...
PR: 221416
Submitted by: Fabian Keil
Obtained from: ElectroBSD
MFC after: 1 week
"pw usermod someuser -G ''" is supposed make sure that someuser
doesn't have any secondary group memberships.
Previouly it was a nop because split_groups() only intitialised
"groups" if at least one group was specified. As a result the
existing secondary group memberships were kept.
PR: 221417
Submitted by: Fabian Keil
Obtained from: ElectroBSD
MFC after: 1 week
Relnotes: yes
Drop the EARLY_AP_STARTUP gtaskqueue code, as gtaskqueues are now
initialized before APs are started.
Reviewed by: hselasky@, jhb@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12054
error: implicit conversion from 'bfd_vma' (aka 'unsigned long long')
to 'int' changes value from 18446744073709551615 to -1
return BFD_ALIGN (ret, 16);
~~~~~~ ^~~~~~~~~~~~~~~~~~~
note: expanded from macro 'BFD_ALIGN'
: ~ (bfd_vma) 0)
^~~~~~~~~~~~~
Sponsored by: The FreeBSD Foundation
the host argument (e.g. "www.freebsd.org:443"), the service pointer,
which is supposed to point to the port or service part, instead points
to the separator, causing getaddrinfo() to fail.
Note that I have not been able to trigger this bug with fetch(1), nor
do I believe it is possible, as libfetch always parses the host:port
specification itself. I discovered it when I copied fetch_resolve()
into an unrelated project.
MFC after: 3 days
exception did not happen in vm86 mode. A vm86 userland process could
have a %cs that matches GSEL_KPL, while dtrace cannot hook it.
Submitted by: Maxime Villard <max@m00nbsd.net>
MFC after: 3 days
was aliased to a vt sequence, causing and fixing various bugs.
For syscons, this restores support for arg 2 which sets blinking block
too forcefully, and restores bugs for arg 0 and 1. Arg 2 is used for
vs in the cons25 entry in termcap, but I've never noticed an application
that uses this. The bugs involve replacing local settings by global
ones and need better handling of defaults to fix.
For vt, this requires moving the aliasing code from teken to vt where
it belongs. This sequences is very important for cons25 compatibility
in vt since it is used by the cons25 termcap entries for ve, vi and
vs. vt can't properly support vs for either cons25 or xterm since it
doesn't support blinking. For xterm, the termcap entry for vs asks
for something different using 12;25h instead of 25h.
Rename C25CURS for this to C25LCT and change its description to be closer
to echoing the old comment about it. CURS is too generic.
Fix missing syscons escape sequence for setting the global cursor shape
(and type). Only support this in syscons since vt can't emulate anything
in it.
In a recent commit, I forgot to expand an X to an abbreviation of "BORDER".
Fix this and some nearby bad names.
The descriptions were copied from comments in scterm-sc.c, but some
of these are bad. The border [color] was inconsistently described as
a property of the "display", but I had changed this to "adapter" to
match the descriptions for other color settings. All colors supported
by the cons25 sequences are actually properties of the current vty and
that should not be described. But the other colors are defaults.
Change "adapter" to "default" for them and remove "adapter" for the
border. Reduce the verbosity of the abbreviation from AD to D.
It should toggle between 2 states, but it used a cut-down version of
support for a related 3-state syscons escape sequence and inherited
bugs from that. The usual misbehaviour was that hiding and showing
the cursor reset it to a global default.
Support for the 3-state sequence remains broken by aliasing to the 2-state
sequence. This works better but incompatibly for the 2 cases that it
supports.
Make sure that the flags INP_IPV4 and INP_IPV6 are consistently set
for inpcbs used for TCP sockets, no matter if the setting is derived
from the net.inet6.ip6.v6only sysctl or the IPV6_V6ONLY socket option.
For UDP this was already done right.
PR: 221385
MFC after: 1 week
Right now we only need to pad when writing kernel dump headers, so
flatten three related subroutines into one. The encrypted kernel dump
code already writes out its key in a dumper.blocksize-sized block.
No functional change intended.
Reviewed by: cem, def
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11647
This helps simplify the code in kern_shutdown.c and reduces the number
of globally visible functions.
No functional change intended.
Reviewed by: cem, def
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11603
dump_start() and dump_finish() are responsible for writing kernel dump
headers, optionally writing the key when encryption is enabled, and
initializing the initial offset into the dump device.
Also remove the unused dump_pad(), and make some functions static now that
they're only called from kern_shutdown.c.
No functional change intended.
Reviewed by: cem, def
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11584
sbuf is filled to capacity by vsnprintf(), the loop exits without error, and
the sbuf is not marked as auto-extendable.
SBUF_HASROOM() evaluates true if there is room for one or more non-NULL
characters, but in the case that the sbuf was filled exactly to capacity,
SBUF_HASROOM() evaluates false. Consequently, sbuf_vprintf() incorrectly
assigns an ENOMEM error to the sbuf when in fact everything is fine, in turn
poisoning the buffer for all subsequent operations.
Correct by moving the ENOMEM assignment into the loop where it can be made
unambiguously.
As a related safety net change, explicitly check for the zero bytes drained
case in sbuf_drain() and set EDEADLK as the error. This avoids an infinite loop
in sbuf_vprintf() if a drain function were to inadvertently return a value of
zero to sbuf_drain().
Reviewed by: cem, jtl, gallatin
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D8535
- Remove ad hoc inet_ntoa prototype declaration; it's already handled
by the included headers.
- De-K&Rify the function prototypes for eachres_whoami(..),
eachres_getfile(..), and main(..).
MFC after: 1 week
PR: 71667
Tested with: clang (5.0), gcc (4.2.1, 5)
breaks in the vt case to the same places that the man(1) puts then in
the SYNOPSIS. This was already done for the syscons case. Man pages
can't depend on the driver, and the SYNOPSIS is hard-coded for syscons
except for -f where it is hard-coded for vt. The usage message reverses
this for sc. The only other differences are whitespace and removing
-[dL] and -l for vt.
capabilities.
Most of the capabilities (all of the arcane ones) were in FreeBSD-2.0.5,
but were harder to use then, and vidcontrol didn't try. FreeBSD-4.1.0
added per-vty support, fixed the destructivness of the "destructive"
cursor, and improved APIs. Start using the new APIs, support all of
their capabilities, and document all of the capabilities and some of
the historical mistakes.
vt doesn't support any of this before or after the change.
Fix minor unrelated bitrot in the usage message for the syscons case.
The Nodes per Processor topology information determines how many bits of the
APIC ID represent the Node (Zeppelin die, on Zen systems) ID. Documented in
Ryzen and Epyc Processor Programming Reference (PPR).
Correct topology information enables the scheduler to make better decisions
on this hardware.
Reviewed by: kib@
Tested by: jeff@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11801
during drain operations. When an sbuf is configured to use this feature by way
of the SBUF_DRAINTOEOR sbuf_new() flag, top-level sections started with
sbuf_start_section() create a record boundary marker that is used to avoid
flushing partial records.
Reviewed by: cem,imp,wblock
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D8536
