d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
56,014 Commits 4 Branches 49 Tags 2 GiB
591d99c108
Commit Graph

698 Commits

Author SHA1 Message Date
nyan
591d99c108 Added PC-98 apm support. 
Submitted by:	MURAMATSU Atsushi <amura@ma3.seikyou.ne.jp>
 2001-01-22 11:27:25 +00:00
peter
e56988022f Argh! add card_if.h to the generated list. This fixes kernel builds for 
those who haven't added 'NO_MODULES=off' to /etc/make.conf.
 2001-01-17 22:36:49 +00:00
markm
ce86e2f6bf Clean up Makefile, and remove the last vestiges of NOBLOCKRANDOM. 2001-01-15 19:35:00 +00:00
green
9eed629072 Evidently, svr4 is broken at the moment. Disconnect the build to prevent 
Bad Things from unsuspecting module loaders.
 2001-01-09 04:56:53 +00:00
wollman
70c88bb8da select() DKI is now in <sys/selinfo.h>. 2001-01-09 04:33:49 +00:00
wollman
00b9fd3d5d Note new location of wi driver source code. 2001-01-09 04:29:29 +00:00
imp
cebce29aee Add aic to the list of drivers that might work with NEWCARD. I've added 
the same config lines that NetBSD has.  This builds with both NEWCARD
and GENERIC config files.
 2001-01-08 01:59:15 +00:00
peter
297080615f It is unlikely that we'll be supporting old-style ZMAGIC linux a.out 
binaries on anything but i386.. (ia64, sparc64, etc)  Invert the .if
so that it is inclusive of i386 platforms rather than excluding just
the alpha.
 2001-01-07 03:10:15 +00:00
obrien
c269c9fb36 Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00
asmodai
3ce3460eac We don't use += for SRCS in Makefiles, we simply use the 
line continuation character and state the rest of the sourcefiles
on the next line.
 2001-01-06 09:44:30 +00:00
kuriyama
3589db3e42 Fix typo. 
Pointed out by:	Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
 2001-01-06 06:20:54 +00:00
nsouch
729a83c25c Add the VESA S3 linear framebuffer driver. It works on top of VESA by replacing 
the video switch by another. Exactly as VESA does on top of VGA.

It adds linear framebuffer to S3 VESA 1.2 cards.

Obtained from:	The original S3 ISA code comes from
                Peter Horton <pdh@colonel-panic.com>
 2001-01-05 16:53:10 +00:00
jhay
b1094a7d87 Make sppp a kld. 2001-01-03 08:12:30 +00:00
imp
1e95becf76 add pcic_p to the list of things built 2001-01-02 21:40:41 +00:00
phk
95a1cabbb9 Add a missing vnode_if.h. 
Submitted by:	Jim Bloom <bloom@acm.org>
 2001-01-01 11:28:32 +00:00
paul
0915b9d6ec Change the module name from lnc to if_lnc so that ifconfig works. 2000-12-29 11:46:17 +00:00
des
cff7c7e718 Retire kernfs (kernel part). 2000-12-28 12:17:35 +00:00
cg
60c302e7c6 add sys/dev/sound/pcm/buffer.c, lefo out of last commit 2000-12-23 03:27:09 +00:00
obrien
818087b543 *sigh* The `pecoff' module was added to all arches w/out testing a compile 
on all arches.  This fixes the Alpha kernel build.
 2000-12-22 22:33:15 +00:00
takawata
8ccea54a68 Add ACPI AC adaptor and ACPI Control Method Battery. 
And install notify handler for thermal zone .
 2000-12-22 14:41:55 +00:00
takawata
124f1f9df9 Add pecoff directory. 
Submitted by:nyan
 2000-12-21 15:33:30 +00:00
takawata
966ad05f24 Add PECOFF (WIN32 Execution file format) support. 
To use it, some dll is needed. And currently, the dll is only for NetBSD.
So one more kernel module is needed.
For more infomation,
http://chiharu.haun.org/peace/ .

Reviewed by:	bp
 2000-12-20 12:51:08 +00:00
alex
73bea1c85a Enable the sym module. 2000-12-19 12:54:17 +00:00
alex
887c0fbbcf Use the default value for MFILES 2000-12-19 12:27:53 +00:00
green
83f1ac12c6 Unbreak the modules after the last commit (newpcm kobjification). 2000-12-18 06:39:01 +00:00
cg
2fae4aec24 kobjify. 
this gives us several benefits, including:

* easier extensibility- new optional methods can be added to
  ac97/mixer/channel classes without having to fixup every driver.

* forward compatibility for drivers, provided no new mandatory methods are
  added.
 2000-12-18 01:36:41 +00:00
nyan
b10f174718 PC-98 boxes use aic_cbus.c instead of aic_isa.c. 2000-12-16 04:00:40 +00:00
paul
83011f4a1b Enable building of lnc module. 2000-12-16 01:48:06 +00:00
paul
68a747665a Add lnc module. 2000-12-16 01:47:37 +00:00
wpaul
82f46e4827 Whups: only build the if_el module on the x86 platform for now, until 
I can confirm it works on the alpha.
 2000-12-15 20:14:19 +00:00
wpaul
3ba915a304 Newbus the if_el (3Com 3c501) driver. Use bus_space_X() functions. 
Add detach routine and turn driver into a module so it can be loaded
and unloaded. Also take a stab at implementing multicast packet
reception so that this NIC will work with IPv6. Promiscuous mode
doesn't seem to work, but I'm not sure why. It works well enough that
I can run dhclient on it and put it on the office network though.
Also ripped out spl stuff and replaced it with mutexes.
 2000-12-15 20:09:10 +00:00
imp
0a7da82d71 Fix this based on Mike's moved pci code. We needed to delete the pci_m 
from this module anyway, so I just did that.
 2000-12-14 00:06:10 +00:00
des
60e4cd30f5 Reconnect linprocfs. 2000-12-13 20:29:30 +00:00
imp
c264ce875b Add aic and ray modules. I've been building these for a while now on 
i386.
 2000-12-13 05:54:26 +00:00
imp
b4ed5a3999 Module for aic 
Submitted by:	Michael Reifenberger
 2000-12-13 05:50:02 +00:00
des
fa5b3395bf The linprocfs sources have moved to sys/compat/linprocfs. 2000-12-12 22:00:05 +00:00
des
bfa6c168de Temporarily disconnect linprocfs from the build, until I fix it so it builds 
with Kirk's big proc patch.
 2000-12-12 16:03:17 +00:00
nyan
807fe8d8f9 Added '-DPC98' to CFLAGS if MACHINE == pc98. 2000-12-10 10:07:50 +00:00
des
ee1fe204c7 Add four missing source files. 2000-12-09 13:17:35 +00:00
msmith
c27f2d3c49 Next phase in the PCI subsystem cleanup. 
- Move PCI core code to dev/pci.
 - Split bridge code out into separate modules.
 - Remove the descriptive strings from the bridge drivers.  If you
   want to know what a device is, use pciconf.  Add support for
   broadly identifying devices based on class/subclass, and for
   parsing a preloaded device identification database so that if
   you want to waste the memory, you can identify *anything* we know
   about.
 - Remove machine-dependant code from the core PCI code.  APIC interrupt
   mapping is performed by shadowing the intline register in machine-
   dependant code.
 - Bring interrupt routing support to the Alpha
   (although many platforms don't yet support routing or mapping
   interrupts entirely correctly).  This resulted in spamming
   <sys/bus.h> into more places than it really should have gone.
 - Put sys/dev on the kernel/modules include path.  This avoids
   having to change *all* the pci*.h includes.
 2000-12-08 22:11:23 +00:00
alex
a16fcb08d3 Build the sym driver as a kernel module. 2000-12-07 21:46:04 +00:00
imp
160c677341 Add support for compiling ray driver. 2000-12-07 03:16:21 +00:00
takawata
2d9991ce35 Update Makefile to follow acpica-1115 import. 2000-12-05 08:47:41 +00:00
marcel
5611047489 Don't auto-generate the syscalls. 2000-12-03 01:30:31 +00:00
marcel
4289ffee6c Fix dependency for auto-generated files. This commit is 
for archiving purposes only; auto-generation is going to
be reverted.

requested by: obrien
submitted: gallatin
 2000-12-02 23:47:41 +00:00
markm
14f55e3a6c Default the /dev/random loadable module to blocking-on-bootup, 
but leave a commented-out macro to change this.
 2000-12-02 18:29:18 +00:00
alfred
9e0ca1c338 Revert disconnect of sysvipc now that there's a makefile available 2000-12-01 21:13:06 +00:00
alfred
47bc202c6d Forgotten makefile. 2000-12-01 17:49:16 +00:00
des
7329590233 Disconnect sysvipc, since it doesn't build. 2000-12-01 12:26:39 +00:00
alfred
e6bf60ac99 sysvipc loadable. 
new syscall entry lkmressys - "reserved loadable syscall"

Make syscall_register allow overwriting of such entries (lkmressys).
 2000-12-01 08:57:47 +00:00