Handle the 'z' and 'Z' remote packets for manipulating hardware
watchpoints.
This could be expanded quite easily to support hardware or software
breakpoints as well.
https://sourceware.org/gdb/onlinedocs/gdb/Packets.html
Reviewed by: cem, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
Differential Revision: https://reviews.freebsd.org/D29173
Add wrappers around the dbreg interface that can be consumed by MI
kernel debugger code. The dbreg functions themselves are updated to
return error codes, not just -1. dbreg_set_watchpoint() is extended to
accept access bits as an argument.
Reviewed by: jhb, kib, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29155
This change serves two purposes.
First, we take advantage of the compiler provided endian definitions to
eliminate some long-standing duplication between the different versions
of this header. __BYTE_ORDER__ has been defined since GCC 4.6, so there
is no need to rely on platform defaults or e.g. __MIPSEB__ to determine
endianness. A new common sub-header is added, but there should be no
changes to the visibility of these definitions.
Second, this eliminates the hand-rolled __bswapNN() routines, again in
favor of the compiler builtins. This was done already for x86 in
e6ff6154d2. The benefit here is that we no longer have to maintain our
own implementations on each arch, and can instead rely on the compiler
to emit appropriate instructions or libcalls, as available. This should
result in equivalent or better code generation. Notably 32-bit arm will
start using the `rev` instruction for these routines, which is available
on armv6+.
PR: 236920
Reviewed by: arichardson, imp
Tested by: bdragon (BE powerpc)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29012
Make it easy to define interceptors for new sanitizer runtimes, rather
than assuming KCSAN. Lay a bit of groundwork for KASAN and KMSAN.
When a sanitizer is compiled in, atomic(9) and bus_space(9) definitions
in atomic_san.h are used by default instead of the inline
implementations in the platform's atomic.h. These definitions are
implemented in the sanitizer runtime, which includes
machine/{atomic,bus}.h with SAN_RUNTIME defined to pull in the actual
implementations.
No functional change intended.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This is a prerequisite to using these functions outside of ddb, but also
provides some cleanup and minor refactoring. This code is almost
entirely duplicated between the two implementations, the only
significant difference being the lack of dbreg synchronization on i386.
Cleanups are:
- demote some internal functions to static
- use the constant NDBREGS instead of a '4' literal
- remove K&R definitions
- some added comments
Reviewed by: kib, jhb
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29153
This is x86-only and so should not be in the common area.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential revision: https://reviews.freebsd.org/D29040
Misbehavior has been observed with TSC under VirtualBox, where threads
doing small sleeps (~1 second) may miss their wake up and hang around
in a sleep state indefinitely. Switching back to ACPI-fast decidedly
fixes it, so stop using TSC on VirtualBox at least for the time being.
This partially reverts 84eaf2ccc6, applying it only to VirtualBox and
increasing the quality to 0. Negative qualities can never be chosen and
cannot be chosen with the tunable recently added. If we do not have a
timecounter with a higher quality than 0, then TSC does at least leave
the system mostly usable.
PR: 253087
Reviewed by: emaste, kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29132
Other kernel sanitizers (KMSAN, KASAN) require interceptors as well, so
put these in a more generic place as a step towards importing the other
sanitizers.
No functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29103
Add it to the x86 GENERIC and MINIMAL kernels
Sponsored by: Ampere Computing LLC
Submitted by: Klara Inc.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D28738
Allow setting the bootmethod variable from the Xen PVH entry point, in
order to be able to correctly set the underlying firmware mode when
booted as a dom0.
Move the bootmethod variable to be defined in x86/cpu_machdep.c
instead so it can be shared by both i386 and amd64.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D28619
A BIOS bug may apparently cause the BSP to report that it does not
implement CMCI, with some APs reporting that they do. In this scenario,
avoid a NULL pointer dereference that occurs in cmci_monitor() because
cmc_state was not allocated by the BSP.
PR: 253272
Reported by: asomers, mmacy
Reviewed by: kib (previous version)
MFC after: 1 week
There's a currently ad-hoc protocol to hand off the FreeBSD kernel
payload between the loader and the kernel itself when Xen is in the
middle of the picture. Such protocol wasn't very resilient to changes
to the loader itself, because it relied on moving metadata around to
package it using a certain layout. This has proven to be fragile, so
replace it with a more robust version.
The new protocol requires using a xen_header structure that will be
used to pass data between the FreeBSD loader and the FreeBSD kernel
when booting in dom0 mode. At the moment the only data conveyed is the
offset of the start of the module metadata relative to the start of the
module itself.
This is a slightly disruptive change since it also requires a change
to the kernel which is contained in this patch. In order to update
with this change the kernel must be updated before updating the
loader, as described in the handbook. Note this is only required when
booting a FreeBSD/Xen dom0. This change doesn't affect the normal
FreeBSD boot protocol.
This fixes booting FreeBSD/Xen in dom0 mode after
3630506b9d.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D28411
This stops busdma bounce making assumptions about alignment of malloc(9)
results, which are no longer true.
Also add assert that the result of malloc_aligned() fits into single
page, which is the assumption of the code.
Reported by: dim
Reviewed by: andrew, jah, markj
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28147
This reverts commit 8f54940f01.
The free needs to be called on the address returned by malloc,
not the realigned address.
Noted by: andrew
Sponsored by: The FreeBSD Foundation
i386 codegen insists on preloading tc_priv into register on i386, and
this register cannot be %eax because RDTSCP instruction clobbers it
before it is used.
Reported and tested by: dim
MFC after: 6 days
Sponsored by: The FreeBSD Foundation
Use it in preference of Xfenced RDTSC if RDTSCP is supported. It is
recommended by both Intel and AMD. But, on AMD Zens and newer use
LFENCE, as recommended by AMD [*]. In particular, this means that now
AMD CPUs use more appropriate fence instead of too harsh MFENCe.
Add comment explaining the intent of the selection logic.
Reported by: gallatin [*]
Reviewed by: gallatin, markj
Tested by: gallatin, pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27986
I suspect that virtualization techniques improved from the time when we
have to effectively disable TSC use in VM. For instance, it was reported
(complained) in https://github.com/JuliaLang/julia/issues/38877 that
FreeBSD is groundlessly slow on AWS with some loads.
Remove the check and start watching for complaints.
Reviewed by: emaste, grehan
Discussed with: cperciva
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27629
PCI memory address space is shared between memory-mapped devices (MMIO)
and host memory (which may be remapped by an IOMMU). Device accesses to
an address within a memory aperture in a PCIe root port will be treated
as peer-to-peer and not forwarded to an IOMMU. To avoid this, reserve
the address space of the root port's memory apertures in the address
space used by the IOMMU for remapping.
Reviewed by: kib, tychon
Discussed with: Anton Rang <rang@acm.org>
Tested by: tychon
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27503
Add an explicit thread fence release before returning from
bus_dmamap_sync. This should be a no-op in practice, but makes
explicit that all ordinary stores will be completed before subsequent
reads/writes to ordinary device memory. On x86, normal memory ordering
is strong enough to generally guarantee this. The fence keeps the
optimizer (likely LTO) from reordering other calls around this.
The other architectures already have calls, as appropriate, that
are equivalent.
Note: On x86, there is one exception to this rule. If you've mapped
memory as write combining, then you will need to add a sfence or
similar. Normally, though, busdma doesn't operate on such memory, and
drivers that do already cope appropriately.
Reviewed by: kib@, gallatin@, chuck@, mav@
Differential Revision: https://reviews.freebsd.org/D27448
This is useful for stack unwinders which need to avoid out-of-bounds
reads of a kernel stack which can trigger kernel faults.
Reviewed by: kib, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27356
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
Actually check the wrmsr_safe() return value when setting autonomous
HWP for package.
PR: 245582
Differential Revision: https://reviews.freebsd.org/D24744
This is needed on arm64 for the interface between iommu framework
and iommu controller drivers.
Reviewed by: kib
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D27229
platforms.
This allows to not depend on the IOMMU macro in AHCI driver.
Requested by: kib
Suggested by: andrew
Reviewed by: kib
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D26887
From Linux sources and several datasheets I looked at, it seems that
the workaround is only needed on families 0xf and 0x10. For instance,
Ryzens do not implement the accessed MSR at all, it is documented as
reserved. Also, hypervisors should not allow guest to put CPU into
idle state, so activate workaround only when on bare hardware.
While there, style the code:
move MSR defines to specialreg.h
move identification to initcpu.c
Reported by: whu
Reviewed by: avg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26470
Move dump_avail[] extern declaration and inlines into a new header
vm/vm_dumpset.h. This fixes default gcc build for mips.
Reviewed by: alc, scottph
Tested by: kevans (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26741
The prototype was added with the creation of kern_shutdown.c in r17658,
but it appears to have never been implemented. Remove it now.
Reviewed by: cem, kib
Differential Revision: https://reviews.freebsd.org/D26702
Dynamically created OIDs automatically get this flag set.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26561
This is mostly needed for a common arm64/amd64 iommu code.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26587
The NOTES files have a bunch of hint lines that are removed when
generating LINT. However, we can achieve the same effect by prepending
each of the lines with 'envvar' so the NOTES files become standard
config(8) files. No functional changes as the sed script to generate
the LINT files filters these either way.
Suggested by: kevans
These definitions were repeated by all architectures, with small
variations. Consolidate the common definitons in machine
independent code and use bitset(9) macros for manipulation. Many
opportunities for deduplication remain in the machine dependent
minidump logic. The only intended functional change is increasing
the bit index type to vm_pindex_t, allowing the indexing of pages
with address of 8 TiB and greater.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26129
One problem with the bus_space_read_N() and bus_space_write_N() family of
functions is that they provide no protection against exceptions which can
occur when no physical hardware or device responds to the read or write
cycles. In such a situation, the system typically would panic due to a
kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N() family
of functions provide a mechanism to handle these exceptions gracefully
without the risk of crashing the system.
Typical example is access to PCI(e) configuration space in bus enumeration
function on badly implemented PCI(e) root complexes (RK3399 or Neoverse
N1 N1SDP and/or access to PCI(e) register when device is in deep sleep state.
This commit adds a real implementation for arm64 only. The remaining
architectures have bus_space_peek()/bus_space_poke() emulated by using
bus_space_read()/bus_space_write() (without exception handling).
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25371
that can be extended, but also ensure compile-time type checking. Refactor
common code out of arch-specific implementations. Move the mpr and mps
drivers to this new API. The template type remains visible to the consumer
so that it can be allocated on the stack, but should be considered opaque.
For configurations without x2APIC support (guests, older hardware), the global
LAPIC MMIO mapping will trigger false-positive KCSan reports as it will appear
that multiple CPUs are concurrently reading and writing the same address.
This isn't actually true, as the underlying physical access will be performed
on the local CPU's APIC. Additionally, because LAPIC access can happen during
event timer configuration, the resulting KCSan printf can produce a panic due
to attempted recursion on event timer resources.
Add a __nosanitizethread preprocessor define to prevent the compiler from
inserting TSan hooks, and apply it to the x86 LAPIC accessors.
PR: 249149
Reported by: gbe
Reviewed by: andrew, kib
Tested by: gbe
Differential Revision: https://reviews.freebsd.org/D26354
It could be used in various IOMMU platforms, not only DMAR.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26373
