userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
started, but also by the turnstiles to mark a thread as runnable for
all locks, for instance sleepqueues do:
setrunnable()->sched_wakeup()->sched_add()
In r326218 code was added to allow booting from non-zero CPU numbers
by setting the ts_cpu field inside the ULE scheduler's sched_add()
function. This had an undesired side-effect that prior sched_pin() and
sched_bind() calls got disregarded. This patch fixes the
initialization of the ts_cpu field for the ULE scheduler to only
happen once when the initial thread is constructed during system
init. Forking will then later on ensure that a valid ts_cpu value gets
copied to all children.
Reviewed by: jhb, kib
Discussed with: nwhitehorn
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D13298
Sponsored by: Mellanox Technologies
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Not only this lock doesn't play any role here, dirtying it slows down
other things a little bit as giant-held checks (e.g. DROP_GIANT) are
spread all over the kernel.
MFC after: 1 week
This is done so that the thread state changes during the switch
are not confused with the thread state changes reported when the thread
spins on a lock.
Here is an example, three consecutive entries for the same thread (from top to
bottom):
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"sleep", attributes: prio:84, wmesg:"-", lockname:"(null)"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"spinning", attributes: lockname:"sched lock 1"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"running", attributes: none
The above trace could leave an impression that the final state of
the thread was "running".
After this change the sleep state will be reported after the "spinning"
and "running" states reported for the sched lock.
Reviewed by: jhb, markj
MFC after: 1 week
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9961
We may fail to reset the %CPU tracking window if a thread does not run
for over half of the ticks rollover period, resulting in a bogus %CPU
value for the thread until ticks fully rolls over. Handle this by comparing
the unsigned difference ticks - ts_ltick with SCHED_TICK_TARG instead.
Reviewed by: cem, jeff
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Something evidently got mangled in my git tree in between testing and
review, as an old and broken version of the patch was apparently submitted
to svn. Revert this while I work out what went wrong.
Reported by: tuexen
Pointy hat to: rstone
Somehow in the late stages of testing my sched_ule patch, a character was
accidentally deleted from the file. Correct this.
While I'm committing anyway, the previous commit message requires some
clarification: in the normal case of unlending priority after releasing
a mutex, the thread that was doing the lending will be woken up and
immediately become the highest-priority thread, and in that case no
priority inversion would take place. However, if that thread is pinned
to a different CPU, then the currently running thread that just had its
priority lowered will not be preempted and then priority inversion can
occur.
Reported by: O. Hartmann (typo), jhb (scheduler clarification)
MFC after: 1 month
Pointy hat to: rstone
When a high-priority thread is waiting for a mutex held by a
low-priority thread, it temporarily lends its priority to the
low-priority thread to prevent priority inversion. When the mutex
is released, the lent priority is revoked and the low-priority
thread goes back to its original priority.
When the priority of that thread is lowered (through a call to
sched_priority()), the schedule was not checking whether
there is now a high-priority thread in the run queue. This can
cause threads with real-time priority to be starved in the run
queue while the low-priority thread finishes its quantum.
Fix this by explicitly checking whether preemption is necessary
when a thread's priority is lowered.
Sponsored by: Dell EMC Isilon
Obtained from: Sandvine Inc
Differential Revision: https://reviews.freebsd.org/D9518
Reviewed by: Jeff Roberson (ule)
MFC after: 1 month
Commit r270423 fixed a regression in sched_yield() that was introduced
in earlier changes. Unfortunately, at the same time it introduced an
new regression. The problem is that SWT_RELINQUISH (6), like all other
SWT_* constants and unlike SW_* flags, is not a bit flag. So, (flags &
SWT_RELINQUISH) is true in cases where that was not really indended,
for example, with SWT_OWEPREEMPT (2) and SWT_REMOTEPREEMPT (11).
A straight forward fix would be to use (flags & SW_TYPE_MASK) ==
SWT_RELINQUISH, but my impression is that the switch types are designed
mostly for gathering statistics, not for influencing scheduling
decisions.
So, I decided that it would be better to check for SW_PREEMPT flag
instead. That's also the same flag that was checked before r239157.
I double-checked how that flag is used and I am confident that the flag
is set only in the places where we really have the preemption:
- critical_exit + td_owepreempt
- sched_preempt in the ULE scheduler
- sched_preempt in the 4BSD scheduler
Reviewed by: kib, mav
MFC after: 4 days
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9230
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
p_sched is unused.
The struct td_sched is always co-allocated with the struct thread,
except for the thread0. Avoid useless indirection, instead calculate
td_sched location using simple pointer arithmetic in td_get_sched(9).
For thread0, which is statically allocated, create a structure to
emulate layout of the dynamic allocation.
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D6711
Move it to the struct td_sched for 4BSD, removing always present
field, otherwise unused for ULE.
New scheduler method sched_estcpu() returns the estimation for
kinfo_proc consumption. As before, it always returns 0 for ULE.
Remove sched_tick() scheduler method, unused both by 4BSD and ULE.
Update locking comment for the 4BSD struct td_sched, copying it from
the same comment for ULE.
Spell MAXPRI as PRI_MAX_TIMESHARE in the 4BSD comment.
Based on some notes from, and reviewed by: bde
Sponsored by: The FreeBSD Foundation
a pcb from stoppcbs[] rather than the thread's PCB. However, exited threads
retained td_oncpu from the last time they ran, and newborn threads had their
CPU fields cleared to zero during fork and thread creation since they are
in the set of fields zeroed when threads are setup. To fix, explicitly
update the CPU fields for exiting threads in sched_throw() to reflect the
switch out and reset the CPU fields for new threads in sched_fork_thread()
to NOCPU.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3193
to more C11-ish atomic_thread_fence_seq_cst().
Note that on PowerPC, which currently uses lwsync for mb(), the change
actually fixes the missed store/load barrier, intended by r271604 [*].
Reviewed by: alc
Noted by: alc [*]
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Place sched_random nearer to where it's first used: moving the
code nearer to where it is used makes the code easier to read
and we can reduce the initial "#ifdef SMP" island.
Reword a little the comment and clean some whitespaces
while here.
consistently. This also matches the per-cpu pointer declaration
anyway.
This changes the tweak we give to the load from -32..31 to be 0..31
which seems more inline with the rest of the code (- rnd and the -=
64). It should also provide the randomness we need, and may fix a
signedness bug in the old code (it isn't clear that the effect was
intentional as opposed to sloppy, and the right shift of a signed
value is undefined to boot).
This stores sched_balance() behavior when it used random().
Differential Revision: https://reviews.freebsd.org/D1981
we need randomness in ULE. This removes random() call from the
rebalance interval code.
Submitted by: Harrison Grundy
Differential Revision: https://reviews.freebsd.org/D1968
rather than u_char.
To try and play nice with the ABI, the u_char CPU ID values are clamped
at 254. The new fields now contain the full CPU ID, or -1 for no cpu.
Differential Revision: D955
Reviewed by: jhb, kib
Sponsored by: Norse Corp, Inc.
This change fixes transient performance drops in some of my benchmarks,
vanishing as soon as I am trying to collect any stats from the scheduler.
It looks like reordered access to those variables sometimes caused loss of
IPI_PREEMPT, that delayed thread execution until some later interrupt.
MFC after: 3 days
aborted, allowing other threads to run. Without this change thread is just
rescheduled again, that was illustrated by provided test tool.
PR: 192926
Submitted by: eric@vangyzen.net
MFC after: 2 weeks
Mark cpu_search_lowest/cpu_search_highest/cpu_search_both as noinline,
while cpu_search() gets always_inline. With the attributes set,
cpu_search() is inlined in wrappers, and if()s with constant
conditionals are optimized.
On some tests on many-core machine, the hwpmc reported samples for
cpu_search*() are reduced from 25% total to 9%.
Submitted by: "Rang, Anton" <anton.rang@isilon.com>
MFC after: 1 week
a single priority queue. If that queue had a thread or threads which
could not be migrated we would fail to steal load. This could cause
starvation in situations where cores are idle.
Submitted by: Doug Kilpatrick <dkilpatrick@isilon.com>
Tested by: pho
Reviewed by: mav
Sponsored by: EMC / Isilon Storage Division
by SCHED_PRI_TICKS should be SCHED_PRI_RANGE - 1 so that the resulting
priority value (before nice adjustment) is between SCHED_PRI_MIN and
SCHED_PRI_MAX, inclusive.
Submitted by: kib
Reported by: pho
MFC after: 1 week
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
ffsl() implementation, when it is available, instead of homegrown iteration.
On dual-E5645 amd64 system (2x6x2 cores) under heavy I/O load that reduces
time spent inside cpu_search() from 19% to 13%, while IOPS increased by 5%.
is starting. This is in line with practice in OpenSolaris.
Note that this change is only in ULE and not in the 4BSD scheduler.
Once this change settles in (MFC timeout has expired) we'll try it out
on 4BSD as well.
PR: 177706
Submitted by: Tiwei Bie
MFC after: 1 month
- Do not try to steal load from other CPUs if there was no contest switches
on this CPU (i.e. it was idle all the time and woke up just for bus mastering
or TLB shutdown). If current CPU was idle, then it is quite unlikely that some
other CPU has load to steal. Under high I/O rate, when TLB shutdowns cause
numerous CPU wakeups, on 24-CPU system load stealing code may consume up to
25% of all CPU time without giving any benefits.
- Change code that implements spinning for load to restart spin in case of
context switch. Previous code periodically called cpu_idle() even under
high interrupt/context switch rate.
- Rise spinning threshold to 10KHz, where it gives at least some effect
that may worth consumed power.
Reviewed by: jeff@
to further reduce latency for threads in this queue. This should help
as threads transition from realtime to timeshare. The latency is
bound to a max of sched_slice until we have more than sched_slice / 6
threads runnable. Then the min slice is allotted to all threads and
latency becomes (nthreads - 1) * min_slice.
Discussed with: mav
cache line in order to avoid manual frobbing but using
struct mtx_padalign.
The sole exception being nvme and sxfge drivers, where the author
redefined CACHE_LINE_SIZE manually, so they need to be analyzed and
dealt with separately.
Reviwed by: jimharris, alc
This enables CPU searches (which read tdq_load) to operate independently
of any contention on the spinlock. Some scheduler-intensive workloads
running on an 8C single-socket SNB Xeon show considerable improvement with
this change (2-3% perf improvement, 5-6% decrease in CPU util).
Sponsored by: Intel
Reviewed by: jeff
