During set_freq a clknode might have reparent (using a better parent that
have a higher frequency for example), before refreshing the cache, re-get
the parent frequency.
Reviewed by: mmel
functionality on Raspberry Pi 0.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13924
possible to change string and numeric vendor and product identifiers,
as well as anything else there might be to change for a particular
device side template, eg the MAC address.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13920
In several places, entry start and end field are checked, after
excluding the possibility that the entry is map->header. By assigning
max and min values to the start and end fields of map->header in
vm_map_init, the explicit map->header checks become unnecessary.
Submitted by: Doug Moore <dougm@rice.edu>
Reviewed by: alc, kib, markj (previous version)
Tested by: pho (previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13735
This fixes a panic when `EVDEV_SUPPORT` is enabled: if a trackpoint
packet was detected but there was no trackpoint, we still tried to emit an
evdev event even though the associated relative evdev device (`evdev_r`)
was not initialized.
PR: 225339
MFC after: 1 week
In psmprobe(), we set the initial `syncmask` to the vendor default value
if the `PSM_CONFIG_NOCHECKSYNC` bit is unset. However, we currently only
set it for the Elantech touchpad later in psmattach(), thus `syncmask`
is always configured.
Now, we check `PSM_CONFIG_NOCHECKSYNC` and skip sync check if it is set.
This fixes Elantech touchpad support for units which have `hascrc` set.
To clarify that, when we log the `syncmask` and `syncbits` fields, also
mention if they are actually used.
Finally, when we set `PSM_CONFIG_NOCHECKSYNC`, clear `PSM_NEED_SYNCBITS`
flag.
PR: 225338
MFC after: 1 week
Restore the original character to print if we used the look-ahead
buffer, but that didn't help -- we either got an illegal sequence
or still can't complete.
PR: 224552
Submitted by: Yuri Pankov
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13963
any children prior to detach.
With the newbus child deletion ordering changes introduced in r307518,
parent devices are now detached (and their driver set to NULL) prior to
detaching and deleting child devices; child-related bus methods (e.g.
BUS_CHILD_DETACHED, BUS_CHILD_DELETED) are no longer be dispatched to the
parent device driver after it returns 0 (success) from DEVICE_DETACH.
Sponsored by: The FreeBSD Foundation
addressing. The host addressing constraint does not apply to device address
space, and shouldn't be passed to bhnd_get_dma_translation() as the
maximum supported device address width.
Sponsored by: The FreeBSD Foundation
- Extend the probe method to accept devclasses that inherit from the pci
devclass (e.g. cardbus).
- Some BCM4306-based CardBus adapters appear to advertise 4K SPROM, but
only the first 2K is mapped into BAR0. We can safely assume that the
SPROM data fits within the first 2K of the SPROM, rather than rejecting
the SPROM mapping as invalid.
Sponsored by: The FreeBSD Foundation
(i386 and arm) that never implement them. This allows the removal of
#ifdef PHYS_TO_DMAP on code otherwise protected by a runtime check on
PMAP_HAS_DMAP. It also fixes the build on ARM and i386 after I forgot an
#ifdef in r328168.
Reported by: Milan Obuch
Pointy hat to: me
still active.
Map userspace portion of VA in the PTI kernel-mode page table as
non-executable. This way, if we ever miss reloading ucr3 into %cr3 on
the return to usermode, the process traps instead of executing in
potentially vulnerable setup. Catch the condition of such trap and
verify user-mode %cr3, which is saved by page fault handler.
I peek this trick in some article about Linux implementation.
Reviewed by: alc, markj (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
DIfferential revision: https://reviews.freebsd.org/D13956
- Do not panic on siba(4) detach when the bhnd(4) bus calls
bhnd_get_pmu_info() on a PMU-less device.
- Fix bhnd_pwrctl attach/detach on fixed-clock devices:
- Treat bhnd_pwrctl_updateclk() as a no-op on fixed-clock devices.
- Use bhnd_pwrctl_updateclk() to perform the appropriate clock
transition on detach.
Sponsored by: The FreeBSD Foundation
Highlights of this update:
- /__local_fixups__ is now generated to be GPL dtc and libfdt compliant
- Compiling with -@ will now cause dtc to assign phandles to all labelled
nodes
- /include/ and /incbin/ now handle absolute paths correctly
- The manpage now has information about overlays, including how to apply
them and how to generate them
- Syntactic sugar for overlays is now supported, allowing an overlay DTS
like:
=
/dts-v1/;
/plugin/;
&foo {
foo,status = "okay";
};
=
to generate a fragment targetting <&foo>.
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
Kernel Page Table Isolation (KPTI) was introduced in r328083 as a
mitigation for the 'Meltdown' vulnerability. AMD CPUs are not affected,
per https://www.amd.com/en/corporate/speculative-execution:
We believe AMD processors are not susceptible due to our use of
privilege level protections within paging architecture and no
mitigation is required.
Thus default KPTI to off for AMD CPUs, and to on for others. This may
be refined later as we obtain more specific information on the sets of
CPUs that are and are not affected.
Submitted by: Mitchell Horne
Reviewed by: cem
Relnotes: Yes
Security: CVE-2017-5754
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13971
Make it possible to retrieve mmc parameters via the XPT_GET_ADVINFO
call instead. Convert camcontrol to the new scheme.
Reviewed by: imp. kibab
Sponsored by: Netflix
Differential Revision: D13868
Now it is possible to use UDPLite's port numbers in rules,
create dynamic states for UDPLite packets and see "UDPLite" for matched
packets in log.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
different access rights.
By default there are two community strings with index 1 and 2, one for
read-only access and second for read-write access:
begemotSnmpdCommunityString.0.1 = $(read)
begemotSnmpdCommunityString.0.2 = $(write)
Now it is possible to define additional community strings using different
indexes:
begemotSnmpdCommunityString.0.3 = "SomeString1"
begemotSnmpdCommunityPermission.0.3 = 1
begemotSnmpdCommunityString.0.4 = "SomeString2"
begemotSnmpdCommunityPermission.0.4 = 2
begemotSnmpdCommunityString.0.5 = "SomeString3"
begemotSnmpdCommunityString.0.6 = "SomeString4"
New attribute begemotSnmpdCommunityPermission can be used to specify access
rights: 1 means "read-only" access, 2 means "read-write" access. If
attribute is not specified for some index this means "read-only" rights.
Community strings must be unique, i.e. must not be the same for different
indexes.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D13785
The logical result of a right shift >= the width of a type is zero, but our
compiler decides this is a warning (and thus, error). Just remove ccp(4)
from i386.
Reported by: cy
Sponsored by: Dell EMC Isilon
Similar to NMIs, machine check exceptions can fire at any time and are
not masked by IF. This means that machine checks can fire when the
kstack is too deep to hold a trap frame, or at critical sections in
trap handlers when a user %gs is used with a kernel %cs. Use the same
strategy used for NMIs of using a dedicated per-CPU stack configured
in IST 3. Store the CPU's pcpu pointer at the stop of the stack so
that the machine check handler can reliably find the proper value for
%gs (also borrowed from NMIs).
This should also fix a similar issue with PTI with a MC# occurring
while the CPU is executing on the trampoline stack.
While here, bypass trap() entirely and just call mca_intr(). This
avoids a bogus call to kdb_reenter() (there's no reason to try to
reenter kdb if a MC# is raised).
Reviewed by: kib
Tested by: avg (on AMD without PTI)
Differential Revision: https://reviews.freebsd.org/D13962
When building loader bits, lld fails with the following error:
"ld: error: section: .dynamic is not contiguous with other relro sections"
on both ubldr and EFI loader.
Move .dynamic up to make ld.lld happy, adjust .got as necessary for ubldr.
Tested on: OrangePi One (ld.lld, ubldr)
Tested on: Banana Pi-M3 (ld.lld, ubldr)
Tested on: qemu-armv7 (ld.lld, EFI)
Tested on: qemu-armv7 (ld.bfd, EFI)
Tested on: Raspberry Pi 2 (ld.bfd, ubldr) [manu]
Tested on: Banana Pi-M2 (ld.bfd, ubldr) [manu]
Reviewed by: andrew, emaste, imp
Differential Revision: https://reviews.freebsd.org/D13942
* Registers TRNG source for random(4)
* Finds available queues, LSBs; allocates static objects
* Allocates a shared MSI-X for all queues. The hardware does not have
separate interrupts per queue. Working interrupt mode driver.
* Computes SHA hashes, HMAC. Passes cryptotest.py, cryptocheck tests.
* Does AES-CBC, CTR mode, and XTS. cryptotest.py and cryptocheck pass.
* Support for "authenc" (AES + HMAC). (SHA1 seems to result in
"unaligned" cleartext inputs from cryptocheck -- which the engine
cannot handle. SHA2 seems to work fine.)
* GCM passes for block-multiple AAD, input lengths
Largely based on ccr(4), part of cxgbe(4).
Rough performance averages on AMD Ryzen 1950X (4kB buffer):
aesni: SHA1: ~8300 Mb/s SHA256: ~8000 Mb/s
ccp: ~630 Mb/s SHA256: ~660 Mb/s SHA512: ~700 Mb/s
cryptosoft: ~1800 Mb/s SHA256: ~1800 Mb/s SHA512: ~2700 Mb/s
As you can see, performance is poor in comparison to aesni(4) and even
cryptosoft (due to high setup cost). At a larger buffer size (128kB),
throughput is a little better (but still worse than aesni(4)):
aesni: SHA1:~10400 Mb/s SHA256: ~9950 Mb/s
ccp: ~2200 Mb/s SHA256: ~2600 Mb/s SHA512: ~3800 Mb/s
cryptosoft: ~1750 Mb/s SHA256: ~1800 Mb/s SHA512: ~2700 Mb/s
AES performance has a similar story:
aesni: 4kB: ~11250 Mb/s 128kB: ~11250 Mb/s
ccp: ~350 Mb/s 128kB: ~4600 Mb/s
cryptosoft: ~1750 Mb/s 128kB: ~1700 Mb/s
This driver is EXPERIMENTAL. You should verify cryptographic results on
typical and corner case inputs from your application against a known- good
implementation.
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12723
[COST]Fix PR35865: Fix cost model evaluation for shuffle on X86.
Summary:
If the vector type is transformed to non-vector single type, the
compile may crash trying to get vector information about non-vector
type.
Reviewers: RKSimon, spatel, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41862
This should fix "Not a vector MVT!" errors when building the
games/dhewm3 port.
Reported by: jbeich
PR: 225271
[ValueTracking] remove overzealous assert
The test is derived from a failing fuzz test:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=5008
Credit to @rksimon for pointing out the problem.
This should fix "Bad flavor while matching min/max" errors when building
the graphics/libsixel and science/kst2 ports.
Reported by: jbeich
PR: 225268, 225269
When a section placement (AT) command references the section itself,
the physical address of the section in the ELF header was calculated
incorrectly due to alignment happening right after the location
pointer's value was captured.
The problem was diagnosed and the first version of the patch written
by Erick Reyes.
Obtained from: LLVM r322421 by Rafael Espindola
The problem we had with it is that anything inside an AT is an
expression, so we failed to parse the section name because of the - in
it.
Requested by: royger
Obtained from: LLVM r322801 by Rafael Espindola
AT> lma_region expression allows to specify the memory region
for section load address.
Should fix [upstream LLVM] PR35684.
LLVM review: https://reviews.llvm.org/D41397
Obtained from: LLVM r322359 by George Rimar
In the !PTI case the NMI handler jumped past the instructions that set
%rdi to point to the current PCB, but the target instructions assumed %rdi
were set.
Reviewed by: kib
Tested by: pho
- The process stats are actually thread counts rather than process
counts.
- Simplify various descriptions to remove mention of stats that are
updated every 5 seconds (all VM related stats are now "instant",
only the load average is updated every 5 seconds).
- Don't make any mention of special treatment for processes that have
been active in the last 20 seconds. We don't track that stat.
- Rework the description of active virtual memory. Call it mapped
virtual memory and explicitly point out it is not the same as the
active page queue (which corresponds to "Active" in top(1)), and
also hint at the possible bogusness of the value (e.g. if a process
maps a single page out of a multiple GB file, the entire file's size
is considered mapped).
- Simplify a few descriptions that implied their output was a value
per interval. All of the "rate" values are per-second rates scaled
across the interval.
- Update a few comments for 'struct vmtotal' along similar lines.
Reported by: mwlucas (indirectly)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13905
