When panicing because of an unhandled data abort from the kernel it is
useful to know the register state and faulting address to aid debugging.
Print these registers before calling panic.
Sponsored by: DARPA, AFRL
- handle the CLOCK_{PROCESS,THREAD}_CPUTIME_ID specified directly;
- fix thread id calculation as in the Linuxulator we should
convert the user supplied thread id to struct thread * by linux_tdfind();
- fix CPUCLOCK_SCHED case by using kern_{process,thread}_cputime()
directly as native get_cputime() used by kern_clock_gettime() uses
native tdfind()/pfind() to find proccess/thread.
PR: 240990
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23341
MFC after: 2 weeks
and get_thread_cputime() and add prototypes for it to <sys/syscallsubr.h>.
As both functions become a public interface add process lock assert
to ensure that the process is not exiting under it.
Fix whitespace nit while here.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23340
MFC after 2 weeks
so don't initialize nwhich in declaration and remove stale comment from r161304.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D23339
MFC after: 2 weeks
and this is more space efficient.
Stop queueing recently used buckets to the head of the list. If the bucket
goes to a different processor the cache coherency will be more expensive.
We already try to encourage cache-hot behavior in the per-cpu layer.
Reviewed by: rlibby
Differential Revision: https://reviews.freebsd.org/D23493
This simplifies the driver's rx fast path as well as the bookkeeping
code that tracks various rx buffer sizes and layouts.
MFC after: 1 week
Sponsored by: Chelsio Communications
This allows us to boot FreeBSD RISCV on QEMU using the -kernel command line
options. When using that option, QEMU maps the kernel ELF file to the
addresses specified in the LMAs in the program headers.
Since version 4.2 QEMU ships with OpenSBI fw_jump by default so this allows
booting FreeBSD using the following command line:
qemu-system-riscv64 -bios default -kernel /.../boot/kernel/kernel -nographic -M virt
Without this change the -kernel option cannot be used since the LMAs start
at address zero and QEMU already maps a ROM to these low physical addresses.
For targets that require a different kernel LMA the make variable
KERNEL_LMA can be overwritten in the config file. For example, adding
`makeoptions KERNEL_LMA=0xc0200000` will create an ELF file that will be
loaded at 0xc0200000.
Before:
There are 4 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x001000 0xffffffc000000000 0x0000000000000000 0x75e598 0x8be318 RWE 0x1000
DYNAMIC 0x71fb20 0xffffffc00071eb20 0x000000000071eb20 0x000100 0x000100 RW 0x8
GNU_STACK 0x000000 0x0000000000000000 0x0000000000000000 0x000000 0x000000 RW 0x0
NOTE 0x693400 0xffffffc000692400 0x0000000000692400 0x000024 0x000024 R 0x4
After:
There are 4 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x001000 0xffffffc000000000 0x0000000080200000 0x734198 0x893e18 RWE 0x1000
DYNAMIC 0x6f7810 0xffffffc0006f6810 0x00000000808f6810 0x000100 0x000100 RW 0x8
GNU_STACK 0x000000 0x0000000000000000 0x0000000000000000 0x000000 0x000000 RW 0x0
NOTE 0x66ca70 0xffffffc00066ba70 0x000000008086ba70 0x000024 0x000024 R 0x4
Reviewed By: br, mhorne (earlier version)
Differential Revision: https://reviews.freebsd.org/D23436
ext_arg2 is the only item in the third cacheline in an mbuf and could be
cold by the time rxb_free runs. Put the information needed by rxb_free
in the same line as the refcount, which is very likely to be hot given
that rxb_free runs when the refcount is decremented and reaches 0.
MFC after: 1 week
Sponsored by: Chelsio Communications
The ports framework recently grew support for installing dependencies with
a dedicated target called "install-missing-packages". Let's retire the
carefully constructed one-liner that was used for getting dependencies so
far and use the official ports target instead.
Reviewed by: bcr
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D23485
"*-out" is a complex way of phrasing the fact, and it causes
confusion for people.
Submitted by: debdrup
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D23482
requested.
This is a tradeoff between PCIe efficiency during large packet rx and
packing efficiency during small packet rx.
MFC after: 1 week
Sponsored by: Chelsio Communications
If the thread's lock is already that of the runqueue, don't recurse on
the queue lock.
Reviewed by: jeff, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23492
clang has the unfortunate property of paying little attention to prediction
hints when faced with a loop spanning the majority of the rotuine.
In particular fget_unlocked has an unlikely corner case where it starts almost
from scratch. Faced with this clang generates a maze of taken jumps, whereas
gcc produces jump-free code (in the expected case).
Work around the problem by providing a variant which only tries once and
resorts to calling the original code if anything goes wrong.
While here note that the 'seq' parameter is almost never passed, thus the
seldom users are redirected to call it directly.
This eliminates a branch from its consumers trading it for an extra call
if ktrace is enabled for curthread. Given that this is almost never true,
the tradeoff is worth it.
With r357314, sizeof(struct uma_bucket) grew to 16 bytes on 32-bit
platforms, so BUCKET_SIZE(4) is 0. This resulted in the creation of a
bucket zone for buckets with zero capacity. A more general fix is
planned, but for now this bandaid allows 32-bit platforms to boot again.
PR: 243837
Discussed with: jeff
Reported by: pho, Jenkins via lwhsu
Tested by: pho
Sponsored by: The FreeBSD Foundation
Most notably, we want to make sure we don't clobber any capabilities-related
errors. This is a regression from r357412 (O_SEARCH) that was picked up by
the capsicum tests.
PR: 243839
Reviewed by: kib (committed form recommended by)
Tested by: lwhsu
Differential Revision: https://reviews.freebsd.org/D23479
Once all CPUs are online, determine if they all support LSE atomics and
set lse_supported to indicate this. For now the atomic(9)
implementations are still always inlined, though it would be preferable
to create out-of-line functions to avoid text bloat. This was not done
here since big.little systems exist in which some CPUs implement LSE
while others do not, and ifunc resolution must occur well before this
scenario can be detected. It does seem unlikely that FreeBSD will
ever run on such platforms, however, so converting atomic(9) to use
ifuncs is probably a good next step.
Add a LSE_ATOMICS arm64 kernel configuration option to unconditionally
select LSE-based atomic(9) implementations when the target system is
known.
Reviewed by: andrew, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation, Amazon (hardware)
Differential Revision: https://reviews.freebsd.org/D23325
These make use of the cas*, ld* and swp instructions added in ARMv8.1.
Testing shows them to be significantly more performant than LL/SC-based
implementations.
No functional change here since the wrappers still unconditionally
select the _llsc variants.
Reviewed by: andrew, kib
MFC after: 1 month
Submitted by: Ali Saidi <alisaidi@amazon.com> (original version)
Differential Revision: https://reviews.freebsd.org/D23324
Add a _llsc suffix for the existing LL/SC-based implementations and add
trivial wrappers. This is in preparation for supporting LSE-based
atomic(9) implementations.
No functional change intended.
Reviewed by: andrew, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation, Amazon (hardware)
Differential Revision: https://reviews.freebsd.org/D23323
Parameterize the macros by type width as well as acq/rel semantics.
This makes modifying the implementations much less tedious and
error-prone and makes it easier to support alternate LSE-based
implementations. No functional change intended.
Reviewed by: andrew, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation, Amazon (hardware)
Differential Revision: https://reviews.freebsd.org/D23322
Instead of doing a 2 iteration loop (determined at runeimt), take advantage
of the fact that the size is already known.
While here provdie cap_check_inline so that fget_unlocked does not have to
do a function call.
Verified with the capsicum suite /usr/tests.
It was generated to be just a jumping off point to tmpfs_itimes.
While here provide a dedicated variant for getattr since we normally don't
expect to need to the update from that caller.
Previously, addr2line would sequentially search all CUs for each input
address. For some uses, notably syzkaller's code coverage map generator,
this was extremely slow. Add a CU cache into which entries are added
following a successful lookup, and search the cache before falling back
to a scan. When translating a large number of addresses this yields
slightly better performance than GNU addr2line.
Garbage-collect an unused hash table which appears to have been intended
for the same purpose. A hash table doesn't seem particularly suitable
since each CU spans a range of addresses.
Submitted by: Tiger Gao <tig@freebsdfoundation.org>
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23418
Changes to units.1:
- Change the description to a more descriptive "conversion calculator".
- Sort options.
- Split the description into sections to make it easier to navigate the
manual page.
- Improve the description of various options.
- Document the default value of the output format.
- Use more mdoc macros for better readability.
- Document the behavior of the PATH environmental variable.
- Improve examples.
- Add sections: EXIT STATUS, DIAGNOSTICS, and HISTORY.
- Document that units(1) cannot convert negative values and it handles long
unit lists poorly.
- Update the documentation of the -V flag to match the implementation.
units(1) prints its version and the units data file instead of its
version and usage information.
Changes to units.c:
- Update usage information.
- Sort longopts elements.
This commit does not attempts to change the current behavior of units(1).
What's left to do is probably defining a better versioning (at the moment
units(1) always reports "FreeBSD units" as its version) and changing the
behavior of the -V flag to only print version.
Reviewed by: allanjude (earlier version), bcr
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D18977
In r357324 most of the use of gi_irq was moved to gi_lpi. Complete this
with the last few places we need the IRQ value and create gi_id for the
per-device value we need.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
The code was using a hand-rolled fcmpset loop, while in other places the same
count is manipulated with the refcount API.
This transferred from a stylistic issue into a bug after the API got extended
to support flags. As a result the hand-rolled loop could bump the count high
enough to set the bit flag. Another bump + refcount_release would then free
the file prematurely.
The bug is only present in -CURRENT.
When there are multiple GICv3 ITS devices we don't know which vmem is for
which device. Use device_get_nameunit to get a per-device name.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
