A nested exception condition arises when a second exception is triggered while
delivering the first exception. Most nested exceptions can be handled serially
but some are converted into a double fault. If an exception is generated during
delivery of a double fault then the virtual machine shuts down as a result of
a triple fault.
vm_exit_intinfo() is used to record that a VM-exit happened while an event was
being delivered through the IDT. If an exception is triggered while handling
the VM-exit it will be treated like a nested exception.
vm_entry_intinfo() is used by processor-specific code to get the event to be
injected into the guest on the next VM-entry. This function is responsible for
deciding the disposition of nested exceptions.
iterating over the (possibly empty) list of members. Otherwise, we
get a false negative when the target group has no members listed in
/etc/group. This went mostly unnoticed because root is explicitly
listed as a member of wheel, so the bug is never triggered in the most
common use case, which is su(8).
PR: 109416
MFC after: 1 week
configuration lexer and parser during buildworld. Instead of being
included in the source as it is in the upstream distribution, the code is
now always generated (in ${.OBJDIR}) at build time.
PR: 190739
MFC after: 1 week
Define the precision macros as bits sets to conform with XNU equivalent.
Test fflags passed for EVFILT_TIMER and return EINVAL in case an invalid flag
is passed.
Phabric: https://phabric.freebsd.org/D421
Reviewed by: kib
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
arc4random.c
- CVS rev. 1.22
Change arc4random_uniform() to calculate ``2**32 % upper_bound'' as
``-upper_bound % upper_bound''. Simplifies the code and makes it the
same on both ILP32 and LP64 architectures, and also slightly faster on
LP64 architectures by using a 32-bit remainder instead of a 64-bit
remainder.
- CVS rev. 1.23
Spacing
readpassphrase.c
-CVS rev. v 1.24
most obvious unsigned char casts for ctype
Obtained from: OpenBSD
MFC after: 5 days
Ensure that lex errors fail the build instead of being silently ignored
due to the piped call. Also postpone the update of the nslexer.c file
until we are sure we have generated it properly.
These changes fix some very obscure build failures I encountered while
building FreeBSD within a chroot that did not have devfs mounted. The
specific errors looked like:
.../libc.so.7: undefined reference to `_nsyyerror'
.../libc.so.7: undefined reference to `_nsyyin'
.../libc.so.7: undefined reference to `_nsyylex'
.../libc.so.7: undefined reference to `_nsyylineno'
.../libc.so.7: undefined reference to `_nsyytext'
and were caused due to a mangled nslexer.c being linked into libc.
. Add s_erfl.c to building libm.
. Add MLINKS for erfl.3 and erfcl.3.
* Symbol.map:
. Move erfl and erfcl to their proper location.
* ld128/s_erfl.c:
. Implementations of erfl and erfcl in the IEEE 754 128-bit format.
* ld80/s_erfl.c:
. Implementations of erfl and erfcl in the Intel 80-bit format.
* man/erf.3:
. Document the new functions.
. While here, remove an incomplete sentence.
* src/imprecise.c:
. Remove the stupidity of mapping erfl and erfcl to erf and erfc.
* src/math.h:
. Move the declarations of erfl and erfcl to their proper place.
* src/s_erf.c:
. For architectures where double and long double are the same
floating point format, use weak references to map erfl to
erf and ercl to erfc.
Reviewed by: bde (many earlier versions)
* Update the domain and range of comments for the polynomial
approximations, including using the the correct variable names
(e.g., pp(x) instead of p(x)).
* Use hex values of the form 0x3e0375d4 instead of 0x1.06eba8p-3,
which was obtained from printf("%.6a").
* In the domain [0.84375, 1.25], qa(x) can be reduced from a 4th
order polynomial to 3rd order.
* In the domain [1.25,1/0.35], sa(x) can be reduced from a 4th
order polynomial to 3rd order.
* In the domain [1/0.35, 11], the 4th order polynomials rb(x) and
sb(x) can be reduced to 2nd and 3rd order, respectively.
from erronously constant folding expressions of the form
'1 - tiny'. This allows erf[f](x) to raise INEXACT.
* Use 0.5, 1, and 2, which are exactly representable in radix-2
floating point formats. This reduces diffs between s_erf[fl].c.
* While here, add a comment about efx and efx8.
- In the unionfs case, opendir() and fdopendir() read the directory's full
contents and cache it. This cache is not refreshed when rewinddir() is
called, so rewinddir() will not notice updates to a directory. Fix this
by splitting the code to fetch a directory's contents out of
__opendir_common() into a new _filldir() function and call this from
rewinddir() when operating on a unionfs directory.
- If rewinddir() is called on a directory opened with fdopendir() before
any directory entries are fetched, rewinddir() will not adjust the seek
location of the backing file descriptor. If the file descriptor passed
to fdopendir() had a non-zero offset, the rewinddir() will not rewind to
the beginning. Fix this by always seeking back to 0 in rewinddir().
This means the dd_rewind hack can also be removed.
While here, add missing locking to rewinddir().
CR: https://phabric.freebsd.org/D312
Reviewed by: jilles
MFC after: 1 week
Makefile,v 1.37
tc1.c v 1.3
Rename TEST/test.c tc1.c
common.c,v 1.23
pass lint on _LP64.
emacs.c,v 1.22
pass lint on _LP64.
filecomplete.h,v 1.8
mv NetBSD ID back from 1.9 as we don't
have the widecharacter support.
prompt.c,v 1.14
prompt.h,v 1.9
term.h,v 1.20
read.h,v 1.6
Update NetBSD version strings
sys.h,v 1.12
Misc sun stuff.
tty.c 1.31
handle EINTR in the termios operations
Allow a single process to control multiple ttys (for pthreads using _REENTRANT)
using multiple EditLine objects.
pass lint on _LP64.
Don't depend on side effects inside an assert
MFC after: 1 week
Obtained from: NetBSD
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
Solaris and other OSs have support for \< and \> as word
delimiters in utilities like sed(1). These are useful to
have for general compatiblity with Solaris but should be
avoided for portability with other systems, including the
traditional BSDs.
Bump __FreeBSD_version as this is likely to affect some
userland utilities.
Reference:
https://www.illumos.org/issues/516
PR: bin/153257
Obtained from: Illumos
MFC after: 1 month
- style(9)
TODO: When AI_ADDRCONFIG is specified, getaddrinfo() can
be quite slow for system with many interfaces. We should
have some kernel sysctls to report IPv4/IPv6 status.
Spotted by: melifaro
MFC after: 1 week
o Document PF_LOCAL as being an alias for PF_UNIX
o Document POSIX standardization of this interface using AF_*
constants rather than PF_* constants, and note the three particular
families which POSIX standardizes.
o Note anticipated POSIX standardization of SOCK_CLOEXEC.
o Delete from listing protocol families that FreeBSD doesn't support
(in some cases, like PF_PUP, has never supported).
o Add to listing some current protocol families that have been
introduced in the last decade or so.
o Document the correspondence of PF_* and AF_* constants.
We should probably change the documentation to make the AF_* constants
primary, but this commit does not do so.
Reviewed by: kevlo@
MFC after: 1 month
Previously the sizes were inferred indirectly based on the size of the mappings
at 0 and 4GB respectively. This works fine as long as size of the allocation is
identical to the size of the mapping in the guest's address space. However, if
the mapping is disjoint then this assumption falls apart (e.g., due to the
legacy BIOS hole between 640KB and 1MB).
Also ANSIfy a function declaration.
While here update the OpenBSD patch level in getopt_long.c as we
already have the corresponding change.
Obtained from: NetBSD
MFC after: 2 weeks
The code doesn't really benefit of using reallocf() in this case.
Also, the realloc() results being assigned temporary variable which
makes blind replacement with reallocf() mostly useless.
Pointed out by: stefanf, bde
Use of reallocf is useful in libraries as we are not certain the
application will exit after NULL.
This somewhat reduces portability but if since you are building
this as part of libc it is likely you have our non-standard
reallocf(3) already.
Reviewed by: ache
MFC after: 5 days
and prevents the request from deleting existing mappings in the
region, failing instead.
Reviewed by: alc
Discussed with: jhb
Tested by: markj, pho (previous version, as part of the bigger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Posix strptime() requires support for %t and %n, which were added
to the illumos port. Curiously we were skipping white spaces by
default in most other cases making %t meaningless.
We now skip spaces in the case of the %e specifier as strftime(3)
explicitly adds a space for the single digit case.
Reference:
http://pubs.opengroup.org/onlinepubs/009695399/functions/strptime.html
Obtained from: Illumos (Rev. a11c1571b6942161b0186d0588609448066892c2)
MFC after: 3 weeks
when looking for configured addresses.
This change is based upon the code from the submitter, and made
following changes:
- Exclude addresses assigned on interfaces which are down, like NetBSD
does.
- Exclude addresses assigned on interfaces which are ifdisabled.
PR: 190824
Submitted by: Justin McOmie
MFC after: 1 week
Our strptime(3) implementation was the base for the illumos
implementation and after contacting the author, Kevin Rudy
stated the code is under a 2-Clause BSD License [1]
After reviewing our local changes to the file in question,
the FreeBSD Foundation has agreed that their contributions
to this file are not required to carry clause 3 or 4 so
the file can be relicensed as in Illumos [2].
References:
[1] https://www.illumos.org/issues/357
[2] Illumos Revision: 13222:02526851ba75
Approved: core (jhb)
Approved: FreeBSD Foundation (emaste)
MFC after: 4 days
during SUBDIR_PARALLEL builds. This augments the coarse .WAIT mechanism,
which is still useful if you've got a situation such as "almost everything
depends on A and B".
Because the parallel subdir mechanism uses non-obvious mangling of
target names, which should probably remain a private detail of the
implementation, it's not easy to do things like "libfoo: libbar", so
instead the new mechanism lets you set a variable that lists dependencies:
SUBDIR_DEPEND_libfoo= libgroodah libpouet
Note that while I'm using libraries as an example here, it really has
nothing to do with the generated library files. This is really saying
"build in directory libfoo after building in the libgroodah and libpouet
directories."
This updates lib/Makefile with dependency information based on the old
almost-accurate comment block and by combing through lib/* makefiles
looking for LDADD dependencies to other libraries within lib/*.
Reviewed by: Jia-Shiun Li <jiashiun@gmail.com>
source files could be passed to tblgen or clang-tblgen, leading to a
"Too many positional arguments specified" error message. Fix this by
replacing the too-generic ${.ALLSRC} sources with explicit paths.
Reported by: rysto32@gmail.com, rodrigc
MFC after: 3 days
Per POSIX, siglongjmp() shall be equivalent to longjmp() except that it must
match sigsetjmp() instead of setjmp() and except for the effect on the
signal mask. Therefore, it should preserve the floating point exception
flags.
This was fixed for longjmp() and _longjmp() in r180080 and r180081 for amd64
and i386 respectively.
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
The libatf-* major version numbers in FreeBSD were one version ahead of
upstream because, when atf was first imported into FreeBSD, the upstream
numbers were not respected. This is just confusing and bound to cause
problems down the road.
Fix this by taking advantage of the fact that libatf-* are now private
and that atf is not yet built by default. However, and unfortunately, a
clean build is needed for tests to continue working once "make
delete-old-libs" has been run; hence the note in UPDATING.
remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
Core i7 and Westmere processors, the uncore PMC subsystem is
completely different from the uncore PMC on smaller versions of CPUs.
Disable existing uncore hwpmc code for EX, otherwise non-existing MSRs
are accessed.
The cores PMCs seems to be identical for non-EX and EX, according to
the SDM.
Reviewed by: davide, fabient
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Update the manpage to reflect this change.
- Always set the current position to the first null-byte when opening in append
mode. This makes the implementation compatible with glibc's. Update the test
suite.
Reported by: pho
Approved by: cognet
it implicitly in vmm.ko.
Add ioctl VM_GET_CPUS to get the current set of 'active' and 'suspended' cpus
and display them via /usr/sbin/bhyvectl using the "--get-active-cpus" and
"--get-suspended-cpus" options.
This is in preparation for being able to reset virtual machine state without
having to destroy and recreate it.
POSIX.1-2008 specifies that those two functions should be declared by
including <strings.h>, not <string.h> (the latter only has strcoll_l()
and strxfrm_l()):
http://pubs.opengroup.org/onlinepubs/9699919799/functions/strcasecmp.html
Obtained from: DragonFlyBSD
Reviewed by: theraven
MFC after: 2 weeks
fault on the destination buffer.
Prior to this change a page fault would be detected in vm_copyout(). This
was done after the I/O port access was done. If the I/O port access had
side-effects (e.g. reading the uart FIFO) then restarting the instruction
would result in incorrect behavior.
Fix this by validating the guest linear address before doing the I/O port
emulation. If the validation results in a page fault exception being injected
into the guest then the instruction can now be restarted without any
side-effects.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
of the guest linear address space. These APIs in turn use a new ioctl
'VM_GLA2GPA' to convert the guest linear address to guest physical.
Use the new copyin/copyout APIs when emulating ins/outs instruction in
bhyve(8).
mode. This allows the binder to be functional in the child after the
fork (assuming no lazy loading of a filter is needed), but other rtld
services which require write lock on rtld_bind_lock cause deadlock, if
called by child.
Change the _rtld_atfork() to lock the bind lock in write mode, making
the rtld fully functional after the fork.
Pre-resolve the symbols which are called by the libthr' fork()
interposer, since dynamic resolution causes deadlock due to the
rtld_bind_lock already owned in the write mode.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The CUSE library is a wrapper for the devfs kernel functionality which
is exposed through /dev/cuse . In order to function the CUSE kernel
code must either be enabled in the kernel configuration file or loaded
separately as a module. Currently none of the committed items are
connected to the default builds, except for installing the needed
header files. The CUSE code will be connected to the default world and
kernel builds in a follow-up commit.
The CUSE module was written by Hans Petter Selasky, somewhat inspired
by similar functionality found in FUSE. The CUSE library can be used
for many purposes. Currently CUSE is used when running Linux kernel
drivers in user-space, which need to create a character device node to
communicate with its applications. CUSE has full support for almost
all devfs functionality found in the kernel:
- kevents
- read
- write
- ioctl
- poll
- open
- close
- mmap
- private per file handle data
Requested by several people. Also see "multimedia/cuse4bsd-kmod" in
ports.
vm.max_wired is a system-wide limit, not per-process. Reword the
section to make this more clear.
PR: docs/189214
Submitted by: Lawrence Chen (original text)
Approved by: hrs (mentor)
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
and 3.4 to generate dependency files for the '.inc.h' files generated
from .td files, and .sinclude those dependency files in clang.build.mk.
This will make future incremental builds of lib/clang and usr.bin/clang
work correctly, whenever any of the .td files get modified.
Note that this will not fix any problems with incremental builds from
*before* this revision, since there will not yet be any generated
dependency files. A quick workaround is to run the following:
find /usr/obj -type f -name '*.inc.h' | xargs rm
and then a regular incremental buildworld (e.g. with -DNO_CLEAN).
MFC after: 3 days
This has not added a lot of value when debugging bhyve issues while greatly
increasing the time and space required to store the core file.
Passing the "-C" option to bhyve(8) will change the default and dump guest
memory in the core dump.
Requested by: grehan
Reviewed by: grehan
H_SAVE_FP is similar to H_SAVE but operates on a FILE* instead of a filename.
This is useful when operating in capability mode.
Reviewed by: christos@NetBSD.org, pfg
actual file storing the semaphore object is different from the file
created on the first open. Store the file st_dev and st_ino members
of the struct stat in the semaphore structure on open, and compare
them with the attributes of the opened file to detect unlink and
re-creation.
This fixes an issue of sem_unlink(3) failing to flush the named entry
in the semaphore list for the current or remote process, making
sem_unlink(3) not correctly operating if the unlinked semaphore is
still opened.
Reported by: Joris Giovannangeli <joris@giovannangeli.fr>
PR: standards/189353
Reviewed by: jilles (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
early built libraries. This should be sufficient for most cases and
has eliminated the issues I've seen with high -j builds. Races likely
still remain, but this knocks the problem down a notch.
and MK_LLDB=no, so set those explicitly (now that we can do
that). Simplify tests for these variables as well, since we know they
will always be defined regardless of the phase of the build.
with r265456 _r_debug_postinit can be used for RD_POSTINIT events. rtld(1)
uses r_debug_state for dl state transitions, so we use its address for
RD_DLACTIVITY events.
MFC after: 2 weeks
allowed range or when one or more pages are not mapped. This according to
The Open Group Base Specifications Issue 7.
Discussed with: attilio, Bruce Evans
Reviewed by: alc, Garrett Cooper
Reported by: ATF
MFC after: 2 weeks
Sponsored by: EMC / Isilon storage division
file are always built the same.
(Note that Header and Localstuff must appear first and in that order, the
sorting does not affect as a coincident effect).
Submitted by: sjg
MFC after: 3 days
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.
The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.
This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.
Discussed with: grehan@
since they don't have an easily recognizable signature, was if they
were the default. This commit rewrites crypt_set_format(3) etc to
address this:
- Use a pointer instead of an index to identify the default format.
This pointer is initialized at compile time to point to the first
first element in the list of supported formats, eliminating the
need for crypt_setdefault(). Using a pointer also simplifies
iterating through the list.
- Associate DES with the magic string "_", which takes care of the
Extended DES format.
- Finally, as a special case, if the salt does not match any known
magic string but matches ^[./0-9A-Za-z]{13}$, it is assumed to be a
DES password and is passed on to crypt_des().
MFC after: 1 week
An execute-only fd (opened with O_EXEC) allows neither read() nor write()
and is therefore incompatible with all stdio modes. Therefore, the [EINVAL]
error applies.
Also adjust the similar check in freopen() with a NULL path, even though
this checks an fd which is already from a FILE.
If realpath() is called on pathnames like "/dev/null/." or "/dev/null/..",
it should fail with [ENOTDIR]. Pathnames like "/dev/null/" already failed as
they should.
Also, put the check for non-directories after lstatting the previous
component instead of when the empty component (consecutive or trailing
slashes) is detected, saving an lstat() call and some lines of code.
PR: kern/82980
MFC after: 2 weeks
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
kqueue(2) already supports EVFILT_PROC. Add an EVFILT_PROCDESC that
behaves the same, but operates on a procdesc(4) instead. Only implement
NOTE_EXIT for now. The nice thing about NOTE_EXIT is that it also
returns the exit status of the process, meaning that we can now obtain
this value, even if pdwait4(2) is still unimplemented.
Notes:
- Simply reuse EVFILT_NETDEV for EVFILT_PROCDESC. As both of these will
be used on totally different descriptor types, this should not clash.
- Let procdesc_kqops_event() reuse the same structure as filt_proc().
The only difference is that procdesc_kqops_event() should also be able
to deal with the case where the process was already terminated after
registration. Simply test this when hint == 0.
- Fix some style(9) issues in filt_proc() to keep it consistent with the
newly added procdesc_kqops_event().
- Save the exit status of the process in pd->pd_xstat, as we cannot pick
up the proctree_lock from within procdesc_kqops_event().
Discussed on: arch@
Reviewed by: kib@
are unaware of RFC 3542 can construct control messages.
The kernel disallows mixing RFC 2292 behaviour with RFC 3542 behaviour.
Only sockets that have specifically been marked as using the RFC 2292
API can use RFC 2292 specific options. This is all good and well, but
libc itself seems inconsistent with this.
The root cause of this inconsistency seems to relate to the definitions
of IPV6_HOPOPTS and IPV6_DSTOPTS. They are defined in RFC 2292 and re-used
in RFC 3542, yet have distinct values in the kernel. It's for this reason
that the kernel also has definitions for IPV6_2292HOPOPTS and
IPV6_2292DSTOPTS. Not so in libc.
For example: some program calls inet6_option_init() (defined by RFC 2292)
with the RFC 2292 defined IPV6_HOPOPTS and IPV6_DSTOPTS. Before RFC 3542,
this was translated to values of 22 and 23 (resp.) The libc implementation
correctly checks that only options IPV6_HOPOPTS and IPV6_DSTOPTS are given
(as per RFC 2292) but since these defines have taken on the values defined
by RFC 3542 (values 49 and 50 resp,) rejects the correct option values
(22 and 23) passed said program and returns -1.
The precisie fix is to have inet6_option_init() and friends only accept the
RFC 2292 defined IPV6_HOPOPTS & IPV6_DSTOPTS, but that breaks other code
(like mld6query(8)), which seem to not be aware of RFC 3542 and how it
hi-jacked the option names. So the best fix is to accept the options from
both.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
pointer for the login name (result). Make sure to handle that
case properly. Improve robustness by checking namelen and then
nul-terminating the provided buffer to simplify subsequent logic.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
The pdfork(2) man page states:
"pdfork() returns a PID, 0 or -1, as fork(2) does."
As it returns a PID, the return type should obviously be pid_t. As int
and pid_t have the same size on all architectures, this change does not
affect the ABI in any way.
causing mb* functions (and similar) to be called with the wrong data
(possibly a null pointer, causing a crash).
PR: standards/188036
MFC after: 1 week
A bug caused the "big endian" flag to be lost when receiving a message. As a
result, the bits are interpreted as little endian and an extremely large
allocation is attempted.
This change fixes ping(8)'s communication to casperd(8) on big-endian
architectures.
Reported by: Anton Shterenlikht
Tested by: danfe
These were originally deleted as "not important" but, actually we need them
in place if we want to be able to use autoconf on software that provides
atf-based tests. (That includes being able to rebuild autotest from scratch
on the Kyua cluster machines, as the automated setup does.)
fields of a private struct such that variables of this type are
initialised correctly. Fixes conversion from ISO 2022.
Also do this in the BIG5 module to prevent similar errors in the future.
- In the libiconv module for EUC-TW replace 2^cs with 1<<cs. Fixes
conversion from EUC-TW.
- Synchronise iconv code with NetBSD. In most cases this only updates
the RCS id because the changes are already there or are NetBSD specific.
+ libc/iconv/citrus_csmapper.c: Add a comment.
+ libc/iconv/citrus_db_factory.c: Remove put16().
+ libc/iconv/citrus_iconv.c: Return EINVAL on error.
+ libc/iconv/citrus_mapper.c: Return EINVAL on error.
+ libc/iconv/citrus_memstream.c: Fix type of a variable.
+ libc/iconv/citrus_prop.h: Sync definition of _CITRUS_PROP_HINT_END.
+ libc/iconv/citrus_stdenc.c: Return EINVAL on error.
+ libiconv_modules/mapper_std/citrus_mapper_std.c: Plug memory leak.
Obtained from: NetBSD
MFC after: 2 weeks
from any context i.e., it is not required to be called from a vcpu thread. The
ioctl simply sets a state variable 'vm->suspend' to '1' and returns.
The vcpus inspect 'vm->suspend' in the run loop and if it is set to '1' the
vcpu breaks out of the loop with a reason of 'VM_EXITCODE_SUSPENDED'. The
suspend handler waits until all 'vm->active_cpus' have transitioned to
'vm->suspended_cpus' before returning to userspace.
Discussed with: grehan
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
are only used on armv6 when the vfp unit is detected. They will also be
available for the upcoming armv6hf platform, however while not used by
default there will need to be defined for any software that calls them
directly.
my tests, it is faster ~20%, even on an old IXP425 533MHz it is ~45%
faster... This is partly due to loop unrolling, so the code size does
significantly increase... I do plan on committing a version that
rolls up the loops again for smaller code size for embedded systems
where size is more important than absolute performance (it'll save ~6k
code)...
The kernel implementation is now shared w/ userland's libcrypt and
libmd...
We drop support for sha256 from sha2.c, so now sha2.c only contains
sha384 and sha512...
Reviewed by: secteam@
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
The previous code failed to return an error condition when the whole input
was invalid due to improper handling of the sscanf return value. Actually,
this failure was properly being caught by a test in
tools/regression/lib/libc/net/test-ether.t but was not noticed because
these tests are never run. (On my way to fixing that ;-)
The fix applied here resembles the implementation of ether_line in NetBSD
modulo the setting of an errno value (which is not documented as an
expectation in the manpage anyway).
New ioctls VM_ISA_ASSERT_IRQ, VM_ISA_DEASSERT_IRQ and VM_ISA_PULSE_IRQ
can be used to manipulate the pic, and optionally the ioapic, pin state.
Reviewed by: jhb, neel
Approved by: neel (co-mentor)
The standard states that GMT must be used, but that UTC is equivalent. Still
parse UTC as otherwise this causes problems for pkg(8). It will refetch
the repository every time 'pkg update' or other remote operations
are used behind these proxies.
RFC2616: "All HTTP date/time stamps MUST be represented in Greenwich Mean
Time (GMT), without exception. For the purposes of HTTP, GMT is exactly equal
to UTC (Coordinated Universal Time).""
Approved by: bapt (mentor)
Reviewed by: des, peter
Sponsored by: EMC / Isilon Storage Division
MFC after: 1 week
drop out dated perf numbers (can't imagine people are still running
Pentium MMX 166's anymore)...
bump date...
drop max length of salt of 8 since _PASSWORD_LEN is now large, 128..
and state the max length of the salt depends upon the module,
sha-{256,512} have a max salt of 16..
recommend 8 characters of salt instead of just 2...
MFC after: 1 week
Make fts_open(3) treat an empty pathname like any other pathname that cannot
be lstatted because of [ENOENT].
It is rather confusing if rm -rf file1 "" file2 does not remove file1 and
file2.
PR: bin/187264
MFC after: 2 weeks
